650500–B
OPERATOR’S MANUAL
RELEASED: 10–1–96
INCLUDING: OPERATION, INSTALLATION & MAINTENANCE
ALSO INCLUDE MANUALS: PD02P-X DIAPHRAGM PUMP (PN 97999-680), 2752X-X MATERIAL REGULATOR (PN 97999-674),
P292X1-XXX PIGGYBACKFILTER / REGULATOR (PN 100400-8), R272X1-XXX REGULATOR (PN 100400-6).
REVISED:
(REV. B)
6–22–10
650500–B
LOW PRESSURE DELIVERY SYSTEM
1/4’’ DIAPHRAGM PUMP, 1:1 RATIO, 5 GALLON CONTAINER
FOR USE WITH CONVENTIONAL HVLP / AIR SPRAY SYSTEMS
(SPRAY GUN NOT INCLUDED)
READ THIS MANUAL CAREFULLY BEFORE INSTALLING,
OPERATING OR SERVICING THIS EQUIPMENT
.
It is the responsibility of the employer to place this information in the hands of the operator. Keep for future reference.
SERVICE KITS
C
Use only genuine ARO replacement parts to assure compatible presĆ
sure rating and longest service life.
•
•
•
Diaphragm Pump Rebuild Kit 637314-DT.
Air Valve Repair Kit 637311.
Pump Wet End Repair Kit 637313-DT.
Refer to the PD02P-X Operator's Manual for parts / repair and service
information.
E
PUMP SYSTEM DATA
MODEL . . . . . . . . . . . . . . 650500-B Low Pressure Delivery System
PUMP MODEL . . . . . . . . . PD02P-ADS-DTT
PUMP TYPE . . . . . . . . . . Non-Metallic Air Operated Double
Diaphragm with acetal seats
MATERIAL . . . . . . . . . . . . Groundable Acetal
WEIGHT . . . . . . . . . . . . . 20.5 (9.3 kgs)
AIR INLET . . . . . . . . . . . . 1/4" - 18 N.P.T.F.
AIR CONSUMPTION . . . . 1 c.f.m. per gallon (approximately)
MAX. AIR INLET PRESSURE 100 p.s.i.g. (6.9 bar)
MAX. OUTLET PRESSURE 100 p.s.i.g. (6.9 bar)
MAXIMUM FLOW RATE . . 4.6 g.p.m. (17.4 l/m)
MAXIMUM PARTICLE SIZE 1/32"
MAX. OUTPUT PER CYCLE.014 gallons (53 cc's)
MAXIMUM TEMP. LIMITS . 10_ to 180_F (-12_ to 82_C)
DIMENSIONAL DATA . . . . See page 3
FIGURE 1
D001
NOISE LEVELh . . . . . . . . 59.8 db(A) @ 70 psi, 60 cycles per minute.
h The pump sound pressure levels published here have been updated to an Equivalent Continuous Sound Level (L ) to meet the intent of ANSI S1.13-1971, CAGI-PNEUROP S5.1 using four microphone locations.
Aeq
MAJOR COMPONENTS LIST
* Operator's Manuals are provided, which cover parts and service information.
Item Description
Qty Part No.
Item Description
Qty Part No.
A Modular Piggyback*
B Modular Regulator*
C 1/4 Sst / Carbide Regulator*
(1) P29221-210
(1) R27221-100
(1) 27520-400
D 1/4'' Diaphragm Pump*
E Cover Assembly
(1) PD02P-ADS-DTT
(1) 67082
GENERAL DESCRIPTION
The 650500-B Portable PumpingSystem includes fittings, drum cover,
regulators, siphon tube, gauges and hardware. It is intended to be used
in conventional HVLP (High Volume Low Pressure) spray systems.
These systems generally operate using low material pressure (less
than 30 p.s.i.), and when complimented withthepropergun, itproduces
a ``soft spray".
Read the information included with the spray gun for system settings
and operation information.
PTFE
The diaphragm pump uses acetal seats,
checks and diaphragms
and is designed to be used with waterborne paints. The gun and low
pressure air and material hoses are not included. (Continued)
INGERSOLL RAND COMPANY LTD
209 NORTH MAIN STREET – BRYAN, OHIO 43506
© 2010
(800) 495-0276 FAX(800) 892-6276
PARTS LIST / 650500–B
VIEW C
VIEW A
15-1/4"
(387 mm)
10
27
28
1
AGITATOR
MOUNT
6
9
29
15
VIEW B
22
23
4
18
25
26
24
16-7/8"
(429 mm)
2
MATERIAL OUTLET
TO SPRAY GUN
REFER TO INSTRUCTIONS
INCLUDED WITH SPRAY GUN
LOW PRESSURE
MATERIAL GAUGE
REGULATED AIR
TO SPRAY GUN
MATERIAL PRESSURE
REGULATOR
HIGHER
(CLOCKWISE)
PUMP AIR
REGULATOR
AND GAUGE
LOWER
(CTR-CLOCKWISE)
SPRAY GUN AIR
REGULATOR AND GAUGE
8
7
AIR SUPPLY
18
VIEW A
11
3
13
14
4
19
20
4
VIEW C
12
5
VIEW B
16
24-1/8"
(613 mm)
21
17
650500-B
PAGE 3 OF 4
PN 97999-589
650500-B
PAGE 4 OF 4
|