Quick Setup Guide
NS-DSC10A/NS-DSC10B
Congratulations on your purchase
of a high-quality Insignia product.
Your Insignia digital camera is
designed for reliable and trouble-
free performance. Use this guide for
initial setup of your camera. If you
have questions, see your User Guide
for more information.
Package contents
USB cable
Quick Setup Guide
2 AA alkaline batteries
CD with User Guide
Wrist strap
Installing batteries
1
2
3
Open the battery cover by sliding it in the direction indicated by the
arrow.
Insert two AA batteries with the positive (+) and negative (-) terminals
matching the directions indicated inside the battery compartment.
Close the battery cover.
Inserting a memory card
1
2
Open the battery cover.
Insert an SD or SDHC card with the
metallic part facing the back of the
camera and the connectors pointing in.
3
Close the battery cover.
Note: To remove the card, gently press on the edge of the
card and release it. Pull the card out and close the battery
cover.
Turning the power on and off
1
Press and hold POWER to turn the camera on.
The lens extends and the Insignia startup image is displayed
on the LCD.
2
Press POWER again to turn the camera off.
3
Power-saving function
To save battery power, turn the power saving function ON so that the
camera automatically turns off two minutes after the last control has
been accessed. You can change the power save setting in the Setup
menu.
The power save feature will not activate while you are:
• Recording or playing video
• Erasing or copying files
• Connecting the camera to a computer with the USB cable
Changing the mode
You can record images and videos in Record mode. Use Playback mode
to replay, delete, or copy images and video on the LCD display.
To switch between Record mode and Playback mode
In Record mode, press
In Playback mode, press
(playback) to switch to Playback mode.
(record) to switch to Record mode.
4
Using menus
Use the four-way control and OK/DISP to make menu selections.
To use the Record menu
1
Turn the camera on. If the camera
is not in Record mode, press the
Record button.
Qualit
Fine
High
Auto
Sunny
Off
Resolution
ISO
2
3
Press
Record menu.
(menu) to display the
Color Balance
Stabilizer
Press up or down arrows to
select a menu item and left or
right arrows to change the
setting.
4
Press
(menu) or OK/DISP to save settings and close the menu.
To use the setup menu
1 Turn the camera on. If the camera
is not in Record mode, press the
Record button.
Sounds
On
On
Off
Set
On
Quick View
Date Stamp
Date & Time
Power Save
2 Press
(menu) to display the
Record menu.
3 Use the four-way control to select
SETUP, then press OK/DISP to
display the Setup menu.
4 Press up or down on the 4-way navigation control to select a menu
item, then press right on the 4-way navigation control or OK/DISP to
display it.
5 Press up or down on the 4-way navigation control to select an
option, then press OK/DISP to apply the setting.
6 Press
(menu) to close the menu.
5
307
Taking pictures
10M
1
Turn the power on. Set your camera
to Record mode by pressing the
Record button until the camera icon
appears in the upper left of the LCD
monitor.
2
3
Aim the focus area on the subject
that you want to take a photo of.
AUTO
Press the shutter button half-way
down to focus the image.
The focus area turns green when
the subject is in focus; the aperture
value, shutter speed and ISO value
are displayed.
F2.8 1/60
100
If the shutter speed is slow or picture
may blur, the shake warning icon
may appear on the display. To avoid this, use a tripod to stabilize the
camera when recording images.
4
Press the shutter button fully to take the picture.
Note: Be sure not to block the lens with your fingers or the wrist strap.
6
02:03:04
Recording video clips
x4.0
1
2
Turn the power on.
Press the Record mode button until
the movie icon appears in the upper
lefthand corner of the LCD monitor.
3
4
Focus your camera on the subject
that you want to take.
Press the Shutter button to start
recording. Use the
control to
zoom in and zoom out an image.
Note: When recording videos, audio recording
mutes during zoom operation.
5
Press the Shutter button again to
stop recording.
Note: The camera will automatically stop recording
when memory capacity has been reached.
Playing back images
1
Turn the power on and set the camera to Playback mode.
The last recorded image or video appears on the display. If no images
are stored, [No image] appears on the display.
2
Using the 4-way navigation control, press to see the previous image
or to see the next image.
Note: Hold the or buttons down to scroll through images quickly.
Connecting the camera to a computer
There are two ways to download files from the camera to a computer:
•
Insert the memory card into a card reader
- OR -
•
Connect the camera to a computer using the supplied USB cable
7
Connecting the camera to a computer with the USB cable
1
Connect the supplied USB cable to
the computer’s USB port and turn
on the camera.
A confirmation message appears
on the LCD screen confirming that
a connection has been made, and
then the LCD screen turns off.
2
3
On Windows computers open My
Computer or Windows Explorer.
Removable Disk appears in the drive
list. On Macintosh computers,
a card icon will appear on the desktop. Double-click the icon to access
images.
Double-click the Removable Disk icon to view its contents. Pictures and
video clips stored on the camera or memory card are located in the
DCIM folder.
Accessing the User Guide
•
Insert the enclosed CD into your computer, then open the User Guide
file. If your computer has a slot-load CD/DVD drive, do not insert a mini
user guide.
- OR -
•
the Digital Camera link under Products.
© 2009 Best Buy Enterprise Services, Inc. All rights reserved. INSIGNIA is a trademark of Best Buy Enterprise Services, Inc.
Registered in some countries. All other products and brand names are trademarks of their respective owners.
ENGLISH 09-0394
8
|