3.2 CD Programming
ADVANCED PLAYBACK FUNCTION
PLAYING MP3 / WMA / JPEG
PLAYING DVD/CD DISC
1. DISPLAY Function
1
(Open / Close) • Press to open the disc tray.
Note: Load the disc on the disc
tray with disc label facing upward.
• Press again to close the disc
tray. It will start playback
While the disc is playing, press INFO to display playback information present on
the disc.
For DVD :
•
Press INFO once to display the playback information and playing time of current
chapter as below:
User Guide
automatically.
2
3
(Play)
(Pause)
• Press to start playback.
- -
Disc format
Title
Current chapter
Total chapter
•
•
•
•
Enter the track numbers in
.
• Press to pause playback.
• Press again or press
resume normal playback.
• Press to skip a track or picture
backward or forward.
• Press to stop playback.
• Press to display the selection
menu during playback (for
JPEG/MPEG 4 file only).
• During playback of JPEG file,
press ROTATE to rotate the
picture.
Use ▲, ▼,◄, and ► button to move to another field.
Repeat the above steps for more inputs.
to
DVD
TT 7/36
CH 1/41
00:03:12
Press
playback.
or highlight PLAY on the screen and press OK to start the programmed
CD/DVD Shelf System with iPod Dock | NS-ES6111
Chapter
Total title
Current title
4
5
Elapsed time
•
Highlight the current input on the screen and press ZOOM/CLEAR to delete the
(Stop)
track you input.
•
When replacement parts are required, be sure the service technician uses
replacement parts specified by the manufacturer or have the
same characteristics as the original part. Unauthorized
substitutions may result in fire, electric shock, or other hazards.
Upon completion of any service or repairs to this shelf system,
ask the service technician to perform safety checks to determine
that your shelf system is in proper operation condition.
•
Press INFO twice to further display more playback information as following:
Note:
•
INTRODUCTION
Highlight CLEAR on the PROG screen and press OK to delete all inputs.
Subtitle
Audio
Congratulations on your purchase of a high-quality Insignia product. Your NS-ES6111
represents the state of the art in shelf system design and is designed for reliable and
trouble-free performance.
6
7
ROTATE (for
•
•
4. Random Playback
1/2ENG
JPEG file only)
OFF
1/4
ENG
5.1CH
---
The chapter in DVD and track in CD can be played in random order.
Press the PLAYMODE button.
Angle
•
ZOOM / CLEAR
ZOOM
•
•
•
Press INFO three times to check the remaining time of current chapter.
Press INFO four times to check the playing time of current title.
Press INFO five times to check the remaining time of current title.
SAFETY INFORMATION
USA and Canada versions comply with ETL requirements.
• Press to zoom in a picture
during JPEG file slideshow
playback.
PLAY MODE
PLAY MODE
This product incorporates copyright protection technology that is protected by method
claims of certain U.S. patents and other intellectual property rights owned by
Macrovision Corporation and other rights owners. Use of this copyright protection
technology must be authorized by Macrovision Corporation and is intended for home
and other limited viewing uses only unless otherwise authorized by Macrovision
Corporation. Reverse engineering or disassembly is prohibited.
Consumers should note that not all high definition television sets are fully compatible
with this product and may cause artifacts to be displayed in the picture. In case of
525 or 625 progressive scan picture problems, we recommend that the user switch
the connection to the “standard definition” output. If there are questions regarding our
TV set compatibility with this model 525p and 625p DVD player, contact our customer
service center.
Electric shock warning
MODE
OFF
OFF
MODE
RANDOM
OFF
REPEAT
REPEAT
For CD:
CLEAR
• Press to delete the information
you input.
Disc format
•
When MODE is highlighted, use ◄ or ►to select RANDOM mode. Then press OK
Repeat Mode
to confirm.
Track
8
Active Navigation • Press to select a file and press
OK to start playback.
CD
2 /2
TRK
00:03:12
5. Repeat Playback
Warning: To reduce the risk of electric shock, do not remove the cover or back. There
are no user-serviceable parts inside. Refer servicing to qualified service personnel.
This lightning flash with arrowhead symbol within an equilateral triangle
is intended to alert the user to the presence of uninsulated dangerous
voltage within your shelf system’s enclosure that may be of sufficient
magnitude to constitute a risk of electric shock to persons. The exclamation
point within an equilateral triangle is intended to alert the user to the
presence of important operating and maintenance (servicing) instructions in
the literature accompanying your shelf system.
You can play a specific title, chapter, or track repeatedly. Press the PLAYMODE
To t a l t r a c k
Current track
Elapsed time
button to access the play mode menu.
•
Press INFO once to display the playback information and playing time of current
5.1 Repeating a Title / Chapter / Track / Whole disc
Selection Menu
track.
U.S. Patent Nos. 4,631,603; 4,819,098; 4,907,093; 5,315,448; and 6,516,132
The Selection Menu appears when starting MP3/ WMA/JPEG playback.
All folders appear in the left-side menu and numbered in ascending order.
When one of the folders is highlighted, all the contents of the folder are displayed on
the right side.
Music/Picture files can be selected individually for desired playback. Use the active
navigation keys to highlight Music/Picture at the bottom of Selection Menu and press
OK to confirm.
Then select the files and press OK or
NOTE: You can only see these screens if the unit is connected to a TV
PLAY MODE
•
•
•
Press INFO twice to check the remaining time of current track.
Press INFO three times to check the playing time of current disc.
Press INFO four times to check the remaining time of current disc.
MODE
PROG
OFF
REPEAT
PACKING
CAUTION: To prevent fire or electric shock hazard, do not expose this
Examine the contents of the box of the DVD Shelf System:
•
•
Press the PLAYMODE button, use ▲ or ▼ to select the REPEAT option.
shelf system to rain or moisture.
•
•
•
•
•
•
•
•
DVD Shelf System
1.1 TT (Title Info)
1.
•
(Open / Close)
Press to open the disc tray.
Use ◄ or ► button to select different repeat mode and press OK to confirm. The
WARNING: Your shelf system should not be exposed to water (dripping or splashing)
and no objects filled with liquids, such as vases, should be placed on your shelf
system.
Remote Control with 2 batteries
This Instruction Manual
AV Cable
AM and FM Antenna
2 Front Speakers
2 Speaker wire
iPod universal dock adapters (9,10,11,12,13,14,16,17)
•
Displays the title number being played and the total number of titles recorded on
the disc.
selected mode will be highlighted on the screen.
Note: Load the disc on the disc tray with disc label facing upward.
Press again to close the disc tray. The shelf system starts playback
automatically.
to start playback.
For DVD Disc: Off > Chapter > Title
For CD: Off > REP 1 > REP ALL
For MP3 / JPEG / WMA Disc: Off > REP DIR > REP 1 > REP ALL
•
1.2 CH (Chapter Info)
Displays the chapter number being played and the total number of chapters
recorded on the disc.
Ventilation
•
01
02
03
04
05
06
07
08
09
10
.
.
.
.
.
.
.
.
.
.
BITRATE_03
BITRATE_04
BITRATE_05
BITRATE_06
BITRATE_07
BITRATE_08
BITRATE_09
BITRATE_10
BITRATE_11
BITRATE_12
CAUTION: Do not block any ventilation openings. Install in accordance with these
01
02
03
04
05
06
07
08
09
10
.
.
.
.
.
.
.
.
.
.
BITRATE
FOLDER TEST
FOLDER
ADD CHARAK
ALPHANUYER
NUMERIC
FOLDER
FOLDER
FOLDER
FOLDER
2.
•
Play
instructions.
1
Press to start playback.
5.2 Repeating a Specific Section
While the disc is playing, press A-B to set the beginning of the section you want to
Slots and openings in the cabinet are provided for ventilation and to ensure reliable
operation of your shelf system and to protect it from over-heating.
1.3 Elapsed time
•
•
Displays the elapsed time from the beginning of the title/chapter/disc/track being
3. MENU
2
3
4
5
play repeatedly.
The openings should never be blocked by placing your shelf system on a bed, sofa,
rug, or other similar surface. This shelf system should not be placed in a built-in
installation such as a bookcase or rack unless correct ventilation is provided or these
instructions have been adhered to.
FRONTPANEL
played.
•
Press to display the Disc Menu.
Note: Playback stops to display the menu. The button does not work for CD playback.
REPEAT A-
1.4 Audio
•
•
Press A-B again to set the end of the section you want to play repeatedly.
Displays the audio track currently selected.
4.
•
(search backward or forward, slow motion)
Laser warning
REPEAT A-B
Music
Press
time
to search backward or forward. Press
is pressed, the speed of backward or forward search changes
to resume playback. Each
Picture
or
WARNING: This shelf system uses a laser system.
•
•
The unit immediately begins replaying your section repeatedly.
[MUSIC] - MP3 / WMA Files
accordingly.
To ensure correct use of this shelf system, read this user guide carefully and retain
it for future reference. Should your shelf system require maintenance, contact an
authorized service center.
Changing controls, making adjustments, or carrying out procedures other than those
specified herein may result in hazardous radiation exposure.
To prevent direct exposure to the laser beam, do not try to open the enclosure.
There is visible laser radiation when open.
Do not stare into the beam.
Laser Type: Dual semiconductor laser GaAIAs
Wavelength: 650nm and 780nm
Output Power: 7mW
Press A-B again to clear the programmed repeat playback and return to the
The unit will begin playing all of the MP3 / WMA files currently selected. It then plays
play all the files in the subfolders contained within the same folder. After that, the
unit plays the remaining folders on the disc.
•
In Pause mode, press
time or
accordingly. Press
to start forward or backward slow motion play. Each
normal playback.
is pressed, the speed of slow-motion playback changes
to resume normal playback.
A-B CANCEL
Note: Slow motion step-by-step does not work with CD Playback.
Note:
To Program MP3 song follow these steps:
1. Press PLAYMODE button on the remote control, the Play Mode Menu displays on
•
The A-B repeat function can only be used within the same title. If the start and end
of the section to be repeated are in different titles, it will not work.
5.
(Skip to the beginning of a chapter or track)
When a disc is playing, you can skip backward or forward a chapter or track.
to skip to the beginning of the previous chapter or track.
to skip to the beginning of the next chapter or track.
Note: For audio CD discs, use the numeric buttons (0 - 9) to directly jump to a
the screen.
•
The A-B repeat function does not operate in scenes where different camera angles
are recorded.
2. When MODE is highlighted, use ◄ or ► to select PROG mode. Then press OK to
•
•
Press
Press
enter MP3 program menu. In this menu, the letter F means Folder, T means Track.
3. Input the Folder number below F and track number below T with two digital number.
4. Use the Navigation keys to move to another field and repeat step 3 for the next song.
or highlight PLAY on the screen and press OK to start program playback.
Highlight CLEAR on the PROG screen and press OK to delete all inputs. You can
program up to 16 songs in total.
1. Standby indicator Power on/off Mode - No Light; Standby Mode - Red LED.
2. Infrared receiver Receives the signal from the remote control.
3. LCD Display Area Displays status messages.
4. Disc Tray Place a DVD or CD, label side up, into this tray.
5. iPod dock Insert your iPod player into this jack.
6. BOOKMARK Function
MARK - - - - - - - - - - - -
track number.
Beam Divergence: 60 degree
5. Press
T 1
C 1 00 : 03 :21
CAUTION: Visible and invisible laser radiation is present when your shelf system is
6. Stop
•
open and interlocks are defeated.
The Bookmark feature allows you to mark a point that you want to watch again.
Press once to stop the current playback instantly and enter the Resume Play
Power Cord
mode.
Press
6. VOLUME Adjusts the volume. Turn clockwise to increase the volume and
6.1 Creating a Bookmark
During DVD / CD playback, press BOOKMARK to access the bookmark menu.
Use ◄ or ► button to navigate and press OK to bookmark your desired point.
[PICTURE] - JPEG Files
to resume playback from the point at which you last stopped the disc.
Press twice to stop playback completely. You cannot resume playback.
Press to start playback from the beginning of the disc.
counter-clockwise to decrease the volume.
CAUTION:It is recommend that most appliances be placed on a dedicated circuit—
a single outlet circuit powering that appliance only and has no additional outlets
or branch circuits. Check the specification section of this guide for power
requirements.
•
•
When you press the OK key to select the JPEG file, .the unit only displays the
current file you selected. Press PLAY key to start the slide show for the JPEG file
currently selected. It proceeds to display all other JPEG files in the same folder.
Later the unit plays the JPEG files in the subfolders contained in the same
folders. After that, the unit plays the surplus folders on the disc.
00:03:12
time
•
7. STANDBY/ON Press to turn your shelf system on or to standby mode.
8. Phones Plug standard headphones into this jack.
9. AUX IN Plug external device with Audio output into this jack to play its sound
through this player.
chapter
6.2 Recalling a Bookmark Scene
During playback, press BOOKMARK to access the bookmark menu.
Use ◄ or ► button to highlight the bookmark you want and press
the Bookmark point. Press CLEAR to reset the highlighted bookmark.
7.
Pause
You can freeze the image and advance frame-by-frame.
CD: Press to pause the playback. Press again or press
normal playback.
DVD: Press to pause the playback. Press
time you press , the video advances one frame. Press
Do not overload wall outlets. Overloaded wall outlets, loose or damaged wall
outlets, extension cords, frayed power cords, or damaged or cracked wire insulation
are dangerous. Any of these conditions could result in electric shock or fire.
Periodically examine your shelf system cord, and if its appearance indicates
damage or deterioration, unplug it, discontinue use of your shelf system, and have
the cord replaced with an exact replacement part by an authorized service provider.
Protect the power cord from physical or mechanical abuse, such as being twisted,
kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs,
wall outlets, and the point where the cord exits your shelf system.
00:03:12
•
•
10.
CHANNEL 1) Disc/USB mode - a. Skips to previous chapter or track,
b. Press and hold to fast backward. 2) Radio mode - Tune to previous radio
channel memory. 3) Standby mode - When adjusting clock setting, press to
decrease an hour/minute.
to play from
•
•
to resume the
time
LISTENING TO THE RADIO CHANNEL
again to go to STEP mode. Each
to resume playback.
7. EQ (Selecting Different EQ Modes) and EX BASS Control
11.
CHANNEL 1) Disc/USB mode - a. Skips to next chapter or track, b. Press
and hold to fast forward 2) Radio mode - Tune to next radio channel memory.
3) Standby mode - When adjusting the clock setting, press to increase an hour/
minute.
Important: make sure the FM and AM antennas are connected correctly.
You can program up to 20 FM and 20 AM radio channels maximum for easy recall.
To search a radio station
7.1 EQ Modes
8. TITLE
•
There are a total of 5 EQ modes available. Press EQ repeatedly on the remote
Press to display the Title Menu if present on the disc. This feature works for DVD
playback only.
To disconnect power from the outlet, pull out the plug. When installing your Shelf
system, make sure that the plug is easily accessible.
control for different EQ modes : FLAT, ROCK, POP, CLASSIC, and JAZZ.
1. Press the STANDBY/ON button on the remote control to turn on the unit.
12. Source/Clock Cyclically switching between Disc/USB, FM, AM, AUX and iPod
mode. 2) Standby mode - Press and hold to start setting up the real time clock.
13. Play Disc/USB mode - Play/Select tracks or songs.
14. STOP/OPEN Disc/USB mode - a. Stop playback b. Eject disc in Disc mode.
15. USB jack Plug external USB device into this jack.
2. Press repeatedly either the SOURCE on the front panel or remote control until the
Radio mode is selected. Press again to switch between AM and FM bands if
necessary.
7.2 EX Bass Control
Press EXBASS to switch the EXBASS sound effect on or off.
9. ZOOM (To Zoom In the Image)
IMPORTANT SAFETY INSTRUCTIONS
You can magnify pictures during playback.
CAUTION: Read and observe all warnings and instructions in this user guide and
•
When a disc is playing, press the ZOOM / CLEAR button. Each time the ZOOM /
FM
those marked on your shelf system. Retain this guide for future reference.
8. SLEEP function
CLEAR button is pressed, the ZOOM settings are changed as follows:
RADIO
MHz
This shelf system has been designed and manufactured to assure personal safety.
Improper use can result in electric shock or fire hazard. The safeguards incorporated
in this shelf system will protect you if you observe the following procedures for
installation, use, and servicing. This shelf system does not contain any parts that
can be repaired by you.
This feature lets you select a time for your shelf system to switch to the Standby
mode automatically.
ZOOM x 2 ----> ZOOM x 3 ----> ZOOM x 4 ----> ZOOM x 3/4 ----> ZOOM x 2/3
----> ZOOM x 1/2 ----> ZOOM : OFF
While an image is magnified, you can use ▲, ▼,◄, and ► keys to shift image for
ROCK
EXBASS
REAR PANEL
3. Tune to the radio station by one of the following methods :
Manual Tuning - Press ▲ / ▼ repeatedly on the remote control until the desired
frequency appears on the display.
Automatic Tuning - Press
will stop on any radio station found. Repeat this process until it stops on the desired
•
•
•
8.1 Setting the sleep timer
Press SLEEP on the remote control repeatedly to cycle through the following sleep
timer options.
SLEEP: 90 MINUTES
SLEEP: 70 MINUTES
SLEEP: 50 MINUTES
SLEEP: 30 MINUTES
SLEEP: 10 MINUTES
•
viewing.
To return to the original normal view, press the ZOOM key until the ZOOM : OFF
•
on the remote control to start AUTO SCAN. It
symbol shows. The screen returns to normal.
Do not remove the cabinet cover or you may be exposed to dangerous voltage. Refer
servicing to qualified service personnel only.
•
•
•
•
•
•
•
•
•
•
SLEEP: 80 MINUTES
SLEEP: 60 MINUTES
SLEEP: 40 MINUTES
SLEEP: 20 MINUTES
SLEEP OFF
When you reach the edge of the image, the display will not shift anymore in that
direction.
station.
•
•
•
•
•
Read all safety and operating instructions before operating your shelf system.
Keep safety, operation, and use instructions for future reference.
Heed all warnings on your shelf system and in the operating instructions.
All operation and use instructions should be followed.
Do not use this shelf system near water. For example, do not use this Shelf
system near a bath tub, wash bowl, kitchen sink, laundry tub, in a wet basement,
near a swimming pool, and other areas located near water.
To save a radio station
1. When the desired radio station is tuned. Press OK to start save, the Memory
10. ANGLE
number will start blinking.
You can select different angles of viewing when playing a DVD video disc that
contains scenes recorded from multiple angles.
Press ANGLE repeatedly to select different angles of viewing, if available, on the
FM
•
8.2 Checking the remaining sleep time
RADIO
disc.
MHz
When the Sleep timer is switched on, you can check the remaining time before your
shelf system switches to Standby mode. Press SLEEP once and the remaining
time is displayed.
MEMORY ROCK
EXBASS
Note: This function is only available when the scenes shot from multiple angles have
been recorded on the DVD. If multi-angle viewing is not available,
displayed.
•
•
Clean only with dry cloth. Unplug this shelf system from the wall outlet before
OFF is
cleaning. Do not use liquid cleaners.
IMPORTANT!
Do not block any ventilation openings. Install in accordance with these instructions.
Slots and openings in the cabinet are provided for ventilation to ensure reliable
operation of your shelf system, and to protect it from over-heating.
2. Press ◄/► on the remote control to select the memory number that you want the
unit to memorize.
3. Press OK again to store into the selected memory number, the memory number
display stops blinking to confirm memory saved.
4. Repeat the above steps to save up to 20 FM and 20 AM radio channels.
Connect the AC cord only after the speakers, antenna, and all optional
equipment have been connected.
Never make or change any connections with the power switched on.
The rating plate is located at the rear panel of the system.
8.3 Cancelling the sleep timer
To switch off the Sleep Timer, press SLEEP repeatedly until SLEEP icon is turn off.
11. AUDIO / FM ST
PLAY MODE
Press to change to a different audio language on the disc during playback. You
can change audio language or audio output.
•
Do not block any ventilation openings. Do not place the shelf system on a bed,
MODE
PROG
OFF
sofa, rug or other similar surface. This product should not be placed in a
built-in installation such as a bookcase or rack unless correct ventilation is
provided or these instructions have been adhered to.
REPEAT
•
•
When a disc is playing, press AUDIO / FM ST to show the current playback audio
1. Power Cord
track number.
Plug into an electrical outlet.
Note:When you tune at a weak FM station manually, press AUDIO / FM ST on the
remote control to switch from Stereo mode to Mono mode to reduce the
background noise.
•
•
Do not install near any heat sources such as radiators, heat registers, stoves, or
:
[ 1
2CH ]
2. Component video and progressive outputs
other electronic devices (including amplifiers) that produce heat.
Connect a television that has component video input. Use a component video cable.
This type of connection provides the best picture quality.
Press repeatedly to select the desired audio track.
Note: If there is only one audio track available on the disc, the number does not
change.
Do not defeat the safety purpose of the polarized or grounding-type plug. A
polarized plug has two blades with one wider than the other. A grounding type
plug has two blades and a third grounding prong. The wide blade or the third
prong are provided for your safety. If the provided plug does not fit into your
outlet, consult an electrician for replacement of the obsolete outlet.
3. FM antenna input connections
To recall a memorized radio channel
1. Press the STANDBY/ON button on the remote control to turn on the unit.
2. Press repeatedly either the SOURCE on the front panel or remote control until the
Radio mode is selected. Press again to switch between AM and FM bands if
necessary.
FM reception - Connect the FM antenna to the FM jack. Move the antenna in
various directions until the clearest signal is received.
Chapter
Title
12. SUBTITLE
AM loop antenna connections
•
Protect the power cord from being walked on or pinched particularly at plugs,
receptacles, and the point where they exit from your shelf system.
During playback, you can change to a different subtitle language or disable subtitles.
AM reception - Connect the AM loop antenna to the AM jack. Position the loop
antenna to receive the clearest sound.
•
When a DVD disc is playing, press SUBTITLE to show the current playback
3. Press ◄/► on the remote control or
different memorized radio channel.
on the front panel to change to a
•
•
Use only attachments or accessories specified by Insignia.
language subtitle.
Fully insert the stripped portion of the antenna into the terminal as shown above.
Note: Position the antenna as far away as possible from a TV, VCR, or other
radiation source.
Use only with the cart, stand, tripod, bracket, or table specified
by Insignia, or sold with this shelf system. Use caution when
moving the cart/shelf system combination to avoid injury from
tip-over.
:
[ 3 ENGLISH ]
4. Front speaker
•
Press repeatedly to select the desired subtitle language.
AM
RADIO
MHz
Connect the left front speaker to the L terminals and right front speaker to the
R terminals. Connect the colored wire to the color terminal and black wire to the
black terminal.
- -
MEMORY ROCK
EXBASS
Note: This function can only be used for disc on which different subtitle languages
have been recorded. The number of languages recorded may be different
depending on the disc.
.
•
•
Unplug this shelf system during lightning storms or when unused
for long periods of time.
Refer all servicing to qualified service personnel. Servicing is required when your
shelf system has been damaged in any way, such as power-supply cord or plug is
damaged, liquid has been spilled or objects have fallen into your shelf system,
your shelf system has been exposed to rain or moisture, does not operate
normally, or has been dropped.
4. Press 0 - 9 numeral keys to directly recall the memories.
Note: The memorized radio channels are erased after the unit is unplugged.
5. Video Output - REC
For connecting VCR or other recording device (Most DVDs cannot be recorded).
Audio Outputs - REC
For connecting audio (Left/Right) signal to external recording devices such as VCR
or Tape Recorder.
6. Coaxial output
Connect an external device that has a digital audio input jack.
|