JVC Camera Lens HZ CA13U User Manual

INSTRUCTIONS  
HZ-CA13U Cine Lens Adapter  
Thank you for purchasing the HZ-CA13U Cine lens adapter.  
HZ-CA13U is an adapter for mounting 16mm cine lens to JVC ProHD Camcorder.  
Compatible camcorder : HZ-CA13U can be used on Camcorder which lens mounting method is 1/3-inch Bayonet type.  
GY-HD100U/E, GY-HD101E, GY-HD110U/E, GY-HD111E, GY-HD200U/E, GY-HD201E  
GY-HD250U/E, GY-HD251E  
Pin  
Mounting Cine lens  
(PL Mount)  
1/3-inch Bayonet Mount  
(For Camcorder)  
1/4-inch UNC20 Screw hole  
Back Focus Adjust Ring  
Attaching the Cine Lens Adapter to the Camcorder  
5.When zoom lens is mounted, use Back focus adjust ring to  
Hole  
adjust if the back focus is out of adjustment. Firstly, set to  
Telephoto position and adjust the lens focus, then set to  
Wide-angle position and adjust using Back focus adjust ring  
such that the focus is adjusted properly.  
Pin  
CAUTION  
• Be sure to tighten the mount ring completely. Incomplete  
tightening may result in the lens dropping off or disturbed  
back focus.  
Back focus adjust ring  
• Set the Camcorder’s power switch to “OFF” before the zoom  
lens is attached or detached.  
1.Loosen the mount ring of the camcorder.  
2.Attach the cine lens adapter with its pin aligned with the  
• This adapter is exclusively for 16mm Cine lens.  
• 1/4-inch UNC screw holes for lens support are provided on  
this adapter. Attach the lens support always when using the  
cine lens.  
hole in the mount.  
3.Tighten the mount ring of the camcorder.  
4.In the case of fixed-focus lens, adjust the lens focus to t ,  
• When taking picture using this adapter, the image will be  
displayed upside-down on the monitor. A menu to restore  
the upside-down image is available on GY-HD200/201/250/  
251.  
take picture of object (30m far away or above) and then  
adjust using Back focus adjust ring such that the back focus  
is adjusted properly.  
Specifications  
Conversion Ratio  
Aperture  
: x 0.47  
Dimensions (unit: mm)  
: f / 1.4  
F.B 52in air  
F.B 31in air  
138.2 (Mount to Mount)  
Size length  
Diameter  
: 138.2 mm (Mount to Mount)  
: φ78 mm  
Weight  
: 860 g  
Mount for lens side  
: PL Mount  
Mount for Camera side : 1/3-inch Bayonet Mount  
78.5  
1/4-inch UNC20  
© 2007 Victor Company of Japan, Limited  
 
LST0570-001A  

Infinity Speaker Infinity TOTAL SPEAKER SOLUTIONS User Manual
Ingersoll Rand Grinder 302A User Manual
Ingersoll Rand Water Pump 662420 B User Manual
Insignia Battery Charger NS PWLC591 User Manual
Intel Server SE7230NH1 E User Manual
John Deere Pressure Washer OMM156510 User Manual
JVC MP3 Docking Station 0397MKVUNVP User Manual
Kenwood DVD Player KDV 415U User Manual
Kenwood Stereo System VR 6070 User Manual
Kompernass Hot Beverage Maker SWKT 3000 A1 User Manual