MODEL JDTV-430
Portable ATSC Digital TV with 4.3” TFT LCD
PLEASE READ THIS USER MANUAL COMPLETELY BEFORE
OPERATING THIS UNIT AND RETAIN THIS BOOKLET FOR
FUTURE REFERENCE.
IMPORTANT SAFETY INSTRUCTIONS
TO PREVENT FIRE OR ELECTRICAL SHOCK HAZARD AND OTHER INJURIES, DO
NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE.
1.
2.
3.
4.
5.
6.
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Cleaning - Unplug ac adaptor from this product from the wall outlet before cleaning. Do not
use liquid cleaners or aerosol cleaners. Clean only with dry cloth.
Do not block any ventilation openings. Install in accordance with the manufacturer’s
instructions.
Do not place this product on an unstable cart, stand, tripod, bracket, or
table. The product may fall, causing serious injury to a child or adult, and
serious damage to the product. Use only with a cart, stand, tripod, bracket,
or table recommended by the manufacturer, or sold with the product.
Do not install near any heat sources such as radiators, heat registers,
stoves, or other apparatus (including amplifiers) that product heat.
7.
8.
9.
10. Protect the power cord of the ac adaptor from being walked on or pinched particularly at
plugs, convenience receptacles, and the point where they exit from the apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12. Unplug this apparatus during lightening storms or when unused for a long periods of time.
13. This appliance shall not be exposed to dripping or splashing water and that no object filled
with liquids such as vases shall be placed on the apparatus.
14. Do not overload wall outlet. Use only power source as indicated.
15. Use replacement part as specified by the manufacturer.
16. Power Sources - This product should be operated only from the type of power source
indicated on the marking label. If you are not sure of the type of power supply to your home,
consult your product dealer. For products intended to operate from battery power, or other
sources, refer to the operating instruction.
17. Object and Liquid Entry - Never push objects of any kind into this product through openings
as they may touch dangerous voltage points or short-out parts that could result in a fire or
electric shock. Never spill liquid of any kind on the product.
18. Damage Requiring Service - Unplug this product from the wall outlet and refer servicing to
qualified service personnel under the following conditions:
a) When the power-supply cord or plug is damaged,
b) If liquid has been spilled, or objects have fallen into the product,
c) If the product has been exposed to rain or water,
d) If the product does not operate normally by following the operating instructions. Adjust
only those controls that are covered by the operating instructions as an improper
adjustment of other controls may result in damage and will often require extensive work
by a qualified technician to restore the product to its normal operation.
e) If the product has been dropped or damaged in any way, and
f) When the product exhibits a distinct change in performance - this indicates a need for
service.
SAVE THESE INSTRUCTIONS
User manual of JDTV-430, page 2
COMPLIANCE WITH FCC REGULATIONS
This equipment has been tested and found to comply with the limits for a TV receiver, pursuant to Part 15 of
the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception, which can be determined
by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more
of the following measures:
-
-
-
-
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
WARNING
Changes or modifications to this unit not expressly approved by the party responsible for compliance could
void the user's authority to operate the equipment.
DEAR JENSEN CUSTOMER
Selecting fine audio-visual equipment such as this TV unit you've just purchased is only the start of your
enjoyment. Now it's time to consider how you can maximize the fun and excitement your equipment offers.
This manufacturer and the Electronic Industries Association's Consumer Electronics Group want you to
get the most out of your equipment by playing it at a safe level. One that lets the sound come through loud
and clear without annoying blaring or distortion and, most importantly, without affecting your sensitive
hearing.
Sound can be deceiving. Over time your hearing "comfort level" adapts to higher volumes of sound. So
what sounds "normal" can actually be loud and harmful to your hearing. Guard against this by setting your
equipment at a safe level BEFORE your hearing adapts.
To establish a safe level:
•
•
Start your volume control at a low setting.
Slowly increase the sound until you can hear it comfortably and clearly, and without distortion.
Once you have established a comfortable sound level:
Set the volume control and leave it there.
•
Taking a minute to do this now will help to prevent hearing damage or loss in the future. After all, we want
you listening for a lifetime.
We Want You Listening For a Lifetime
Used wisely, your new TV equipment will provide a lifetime of fun and
enjoyment. Since hearing damage from loud noise is often undetectable until
it is too late, this manufacturer and the Electronic Industries Association's
Consumer Electronics Group recommend you avoid prolonged exposure to
excessive noise.
Customer's Record:
The serial number of this product is found on its bottom. You should note the serial number of this unit in
the space provided as a permanent record of your purchase to aid in identification in the event of theft of
loss.
Model Number: JDTV-430
Serial Number: ____________________
ACCESSORIES INCLUDED
The followings have been included with your TV set:
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
User Manual
Quick Guide
AC Adaptor (5V 1.5A
Li-ion Rechargeable Battery Pack (3.7V 2000mAh)
External Antenna with MCX connector
Stereo earbuds
)
Protective pouch
User manual of JDTV-430, page 3
POWER SOURCE AND RECHARGING
This TV operates on an included Li–ion battery pack and must be charged prior to use.
Please charge the TV for at least 6 hours before first use.
1. Set the TV Power Switch to Off. Plug the included AC Adaptor (5V 1.5A) into the DC Jack of the TV.
2. Once fully charged, you can watch the TV for about 2 hours. The average recharging time is
approximately 5 hours for normal use.
3. To stop the charging process, disconnect the AC
Adaptor.
4. When the battery power becomes low, the low
battery indicator will pop up in the lower right
corner of the screen as shown, please recharge as
soon as possible or otherwise the unit will shut
down on its own.
Notes
ꢀ
While recharging, you may watch the TV as usual but charging time will be extended.
Do not overcharge the player after the initial charge. Overcharging could shorten the battery’s life and
charging capacity.
ꢀ
ꢀ
ꢀ
The Li-ion battery pack will normally offer up to 500 charge/discharge cycles.
The Li-ion battery will discharge slowly on its own even when the unit is not in use, so if the unit is not
used for an extended period of time it will be necessary to recharge the unit at least once every couple
months to maintain normal performance.
Battery Warnings
1. The battery could cause injury or explode if incorrectly replaced. Replacement should be by a qualified
technician and only with the same or equivalent type of battery.
2. Do not disassemble, crush, short-circuit or incinerate your battery as it may cause fire, injury, burns,
explosion or other hazards.
3. Please dispose of properly for recycling.
Replacing the Rechargeable Battery Pack
After regular use over a period of time, the internal battery pack may store less and
less energy per recharge than when it was fresh or even fails to recharge. If that
happens, follows the procedure below to replace it:
1. Set the On/Off Switch of the TV to “OFF”.
2. Open the Battery Compartment Cover and carefully unplug the old battery pack
from the TV unit. Then gently plug in a new battery pack as shown. Note that
the plug is polarized and fit in one direction only.
3. Replace the battery compartment cover securely.
Lithium Battery Safety Instructions
Do not burn or bury batteries. Do not puncture or crush. Do not disassemble.
Recycle lithium batteries. Do not dispose of in the trash.
If the electrolyte in the cells should get on your skin, thoroughly wash with soap and water. If in the eyes,
rinse thoroughly with cool water. Immediately seek medical attention.
Use only chargers rated for lithium cells. Be sure the charger’s voltage and current settings are correct for
the battery pack being charged.
Charge batteries on a fireproof surface away from flammable items or liquids.
Batteries should NEVER be left unattended while charging. Only adults should charge the batteries.
Follow the manufacturer’s instructions for charging the product and do not charge longer than recommended.
Unplug the charger when the battery is charged.
Recycle Rechargeable Batteries
Recycle your old rechargeable batteries at one of the many collection sites in the
toll-free 1-877-2-RECYCLE.
User manual of JDTV-430, page 4
TV CONTROLS
Control
1. POWER
Function
Press to switch unit between On and Standby mode.
2. OK (ENTER)
3. MENU/EXIT
Press to choose a menu item or confirm a setting.
While in TV mode, press to bring up the main function menu.
Inside a function menu, press to end setting mode. Press again to return to TV
mode.
4. VOL-
5. VOL+
6. CH-
While watching TV, press to decrease the volume output.
While in main menu, press to select previous function menu, e.g. Audio.
Inside in a function menu, press to change the setting of the selected menu item.
While watching TV, press to increase the volume output.
While in main menu, press to select next function menu, e.g. Audio.
Inside in a function menu, press to change the setting of the selected menu item.
While watching TV, press to recall the previous captured TV channel.
While in main menu, press to select the first menu item for user adjustment.
Inside in a function menu, press to move the selection bar down the list.
While watching TV, press to recall the next captured TV channel.
Inside in a function menu, press to move the selection bar up the list.
This jack accepts the external monopole antenna included with your TV set
Fully extend this telescopic antenna for best indoor or outdoor reception.
Tips: when receiving weak signal in the upper channels, folding back the last
section may help to improve picture stability.
7. CH+
8. Antenna Input
9. Built-in Antenna
10. TFT Color
Screen
This 16:9 screen delivers vivid pictures at 480H x 272V resolution.
11. Speaker Grille
Do not block these holes where speaker sound is emitted.
They also serve as ventilation openings while TV is in operation.
Fold out the stand if you want to keep the TV set upright.
Remove this cover to disconnect the internal Li-ion battery pack for replacement
when necessary.
12. Foldout Stand
13. Battery
Compartment Cover
14. Headphone Jack This jack accepts a pair of stereo earbuds with a standard 3.5mm plug
15. On/Off Switch
This is the main power on/off switch. Always switch to “off” if you are not using
the TV set for the next few hours to conserve battery power.
16. Charge Indicator ꢀIt will light steadily when the AC adaptor is connected and On/Off Switch is set
to “OFF”.
ꢀIt will flash when On/Off Switch is set to “ON” while battery is being recharged.
ꢀIt will go off when the AC adaptor is connected and battery has been fully
charged or the TV is operating on battery power.
17. DC Jack
This jack accepts the included AC adaptor for normal operation and charging.
User manual of JDTV-430, page 5
USING THE ANTENNAS
For normal outdoor use, fully extend the built-in antenna for best signal reception.
Reception of a stable picture may be impaired if:
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
buildings or tall trees are blocking the broadcasting signals;
it is snowing or raining heavily;
you are moving along with your TV set;
you are operating the TV set inside a moving vehicle;
there are external interferences due to other RF devices nearby.
Notes
ꢀ
Digital TV reception requires the TV set to be stationary while watching.
ꢀ
Keep the built-in antenna stored folded and away from any fast moving or current carrying appliances
such as a working fan.
If pixilation of the picture or weak reception occurs, try using the included magnetic base external antenna to
improve the reception.
Fully extend the antenna cable and plug the MCX connector of the external antenna into the Antenna Jack
of the TV set. Then try placing the external antenna in different locations, e.g. a window, until a stable
picture can be obtained. The external antenna has a magnetic base for you to attach securely to a metal
(iron) surface for improved reception.
GETTING STARTED
When first powered on and there is no channel information stored in the
memory, the TV screen will show a dialog for auto scan setup, press OK
button to start auto scan mode.
User manual of JDTV-430, page 6
FUNCTION MENUS AND SETTINGS
There are 5 different menus: Picture, Audio, Time, Setup and Channel.
ꢀ
ꢀ
ꢀ
ꢀ
Press MENU button to bring up the main menu.
Press VOL+ or VOL- to select a menu.
Press CH- button to select the first menu item and use VOL+ or VOL- button to adjust.
Press EXIT button to finish settings and press again to return to normal TV mode.
PICTURE
1. Picture mode: Standard (default), Dynamic, Soft, Personal.
2. Contrast: 0 -100 (default is 50).
3. Brightness: 0 -100 (default is 50).
4. Sharpness: 0 -100 (default is 50).
5. Tint: 0 -100 (default is 50).
6. Color: 0 -100 (default is 50).
7. Color mode: Normal, Warm, Cool (default), Personal.
8. Zoom Mode: Wide (default), Zoom, Cinema, Normal.
AUDIO
1. Audio Language mode: English (default), French, Spanish.
2. Balance: 0 -100 (default is 50).
TIME
1. Sleep Timer: Off (default), 5, 10, 15, 30, 45, 60, 90, 120, 180, 240.
2. Time zone: Pacific (default), Alaska, Hawaii, Atlantic, Eastern,
Central, Mountain.
3. DST (Daylight Saving Time): On or Off (default).
4. Time format: 12-hour (default) or 24-hour.
5. Clock: this will display the current time using information
transmitted with the receiving TV program.
SETUP
1. Menu (OSD) language: OSD English (default), French, Spanish.
2. Transparent: 0%, 25%(default), 50%, 75%, 100%.
3. OSD Time Out: 5sec, 15sec (default), 30sec,45sec, 60sec.
4. Closed caption:
(a) CC Mode: Select the CC display options from CC off (default),
CC On, CC on mute.
(b) Basic Selection: Select the CC type options from CC1
(default), CC2, CC3, CC4, Text1, Text2, Text3, Text4, Off.
(c) Advanced selection: Select the CC on type options: Service1
(default), Service2, Service3, Service4, Service5, Service6,
Off.
User manual of JDTV-430, page 7
(d) Option Mode: there are more options on font style,
foreground/background color/opacity, select Custom to make
further adjustments:
(i)
Font style: Select the CC font options: Default, Font 0,
Font 1, Font 2, Font 3, Font 4.
(ii)
(iii)
FG color: Default, White, Red, Green, Blue, Yellow,
Magenta, Cyan.
BG color: Default, Black, Red, Green, Blue, Yellow,
Magenta, Cyan.
(iv) FG opacity: Default, Solid, Flashing, Translucent,
Transparent.
(v)
BG opacity: Default, Solid, Flashing, Translucent,
Transparent.
5. Restore Default: chose this to clear all personal preferences &
settings and restore to factory default settings.
CHANNEL
1. Auto Scan:
When selected, will automatically seek out all available channels in
your viewing area. Make sure the antenna is fully extended or you
are using the external magnetic base antenna prior to scanning for
channels.
(i) Press the CH- button to scroll down to Auto Scan.
(ii) Press the OK button to start the scan
(iii) Once the scan is complete, the TV will automatically start
playing the lowest channel found.
(iv) You can now use the CH+ and CH- buttons to change the channels.
2. Show/Hide
Allows you to edit the channels you want shown on the TV once the scan is completed.
(i) Use the CH- to scroll down to Show/Hide
(ii) Press OK to enter.
(iii) A list of all the channels found will display and a “V” will be shown next to the channel if it will show
up when using the CH+ and CH- buttons during normal operation.
(iv) Press the CH- button to scroll down through the channels.
(v) Press the OK button to show the channel (“V” shown next to the channel) or to hide the channel
(no “V” shown next to the channel).
(vi) Press the MENU/EXIT button three times to return to normal viewing.
3. Channel No.
Displays the current channel you are currently viewing.
4. Channel Label
Displays the call letters of the TV station you are currently viewing.
(i) You can edit the channel label by pressing the OK button.
(ii) Use the VOL+/- and CH+/- buttons to edit the name you want displayed for the channel.
(iii) Press the OK button when completed.
5. DTV Signal
Displays the signal strength or the TV station you are currently viewing.
User manual of JDTV-430, page 8
CARE AND MAINTENANCE
1. Children should be supervised when using this TV set.
2. Never wrap the earbud or ac adaptor cord around any animal or person. Special care should be taken
with long wires.
3. Fold back the delicate telescopic antenna when not in use to avoid possible damage.
4. Clean your unit with a damp (never wet) and lint-free cloth. Solvent or detergent should never be used.
The TV panel should only be cleaned with special cleaning agent formulated for such purpose.
5. Avoid leaving your unit in direct sunlight or in hot, humid or dusty places.
6. Keep your unit away from heating appliances and sources of electrical noise such as fluorescent lamps or
motors.
TROUBLESHOOTING
Problems
Possible Causes
Possible Solutions
TV cannot turn ꢀ Internal battery is exhausted.
ꢀ
Recharge battery with provided ac
on
adaptor.
ꢀ
ꢀ
Power On/Off switch is set to “off”. ꢀ Set Power On/Off switch is set to “on”
No picture
received
Signal is weak.
ꢀ
Fully extend the built-in antenna or
change to the external antenna provided.
ꢀ
ꢀ
Receiving channel is not in service. ꢀ Try other TV channels.
Picture is
pixilated
Signal is weak.
ꢀ
Fully extend the built-in antenna or
change to the external antenna provided
and try different locations.
ꢀ
ꢀ
Watching TV in a moving vehicle or ꢀ Watch TV programs only when the TV is
user is walking
stationary.
Bright or dim
pixels on TV
screen
This is due to possible
manufacturing defects.
ꢀ
It is considered as acceptable if the total
number of bright and dim pixels is not
more than 4 at the corners.
SPECIFICATIONS
RF Reception
Antennas
Terrestrial ATSC 8VSB: 54-860MHz (CH2 – 69)
Built-in Antenna : telescopic, monopole type
External Antenna : monopole type with 40-inch extension cord & MCX connector
Audio Processing Digital Multi-lingual
Audio Output
Built-in Speaker X 1 and 3.5mm Headphone Jack
Video Processing MPEG-2 Video Decoding, Terrestrial NTSC
TFT Color Panel
Size : 4.3 inches (diagonal)
Resolution : 480H x 272V
Aspect Radio : 16:9
Power
Li-ion Battery Pack: 3.7V 2000mAh
AC Adaptor: 5V 1.5A
Operating
Temperature
Weight
14°F ~ 122°F (-10°C ~ 50°C)
7oz (200g)
User manual of JDTV-430, page 9
GARANTÍA Y SERVICIOS DE COBERTURA LIMITADA POR 90 DÍAS
VÁLIDA EN LOS ESTADOS UNIDOS SOLAMENTE
SPECTRA MERCHANDISING INTERNATIONAL, INC. garantiza que esta unidad se encuentra libre de
materiales o mano de obra de fábrica defectuosos, por un período de 90 días, desde la fecha de la compra
original por parte del cliente, siempre que el producto sea utilizado dentro de los Estados Unidos. Esta
garantía no es asignable o transferible. Nuestra obligación de acuerdo a esta garantía es reparar o
reemplazar la unidad con defectos o cualquier parte correspondiente, con excepción de las baterías,
cuando es devuelta al Departamento de Servicios de SPECTRA, acompañada de la prueba de la fecha
original de compra por parte de cliente, como por ejemplo una copia duplicada del recibo de ventas.
Usted debe pagar todos los costos de envío requeridos para entregar el producto a SPECTRA para el
servicio de garantía. Si el producto es reparado o reemplazado de acuerdo a garantía, los gastos de retorno
serán por cuenta de SPECTRA. No existen otras garantías expresas diferentes de aquellas declaradas en
el presente documento.
Esta garantía es válida solamente en el cumplimiento de las condiciones que se establecen a continuación:
1. La garantía se aplica solamente al producto de SPECTRA siempre que:
a. Permanezca en posesión del comprador original y se exhiba la prueba de compra.
b. Que no ha sido sometido a accidentes, mal uso, abuso, servicio inapropiado, uso fuera de las
descripciones de advertencia cubiertas dentro del manual del propietario, o modificaciones no aprobada por
SPECTRA.
c. Los reclamos deben ser hechos dentro del período de garantía.
2. Esta garantía no cubre daños o fallas del equipamiento causados por conexiones eléctricas que no
cumplen con los códigos eléctricos, con las especificaciones del manual del propietario de SPECTRA, o la
falta de cuidado razonable y mantenimiento necesario como se describe en el manual del propietario.
3. La garantía de todos los productos de SPECTRA se aplica solamente al uso residencial y es anulada
cuando los productos son utilizados en un ambiente no residencial, o instalados fuera de los Estados
Unidos.
Esta garantía le da derechos legales específicos, y usted puede tener también otros derechos que varían de
estado a estado. Para OBTENER SERVICIO por favor remueva todas las baterías (de existir) y embale la
unidad con cuidado enviándola por correo postal asegurado y prepago o UPS a SPECTRA, a la dirección
que se menciona abajo. SI LA UNIDAD ES DEVUELTA DENTRO DEL PERÍODO DE GARANTÍA
EXHIBIDO arriba, por favor incluya una prueba de compra (recibo de caja registradora con fecha), para que
podamos determinar su elegibilidad para el servicio de garantía y reparación de la unidad sin costo.
También incluya una nota con una descripción explicando en qué forma la unidad es defectuosa. Un
representante de atención al cliente tal vez deba contactarlo en relación al estado de su reparación, por lo
tanto incluya su nombre, dirección, número de teléfono y dirección de correo electrónico para acelerar el
proceso.
SI LA GARANTÍA SE ENCUENTRA FUERA DEL PERÍODO DE GARANTÍA, por favor incluya un cheque
por $75.00 para cubrir el costo de reparación, manejo y correo de retorno. Todas las devoluciones cubiertas
por la garantía deben ser enviadas por correo prepago.
Se recomienda que primero entre en contacto con SPECTRA llamando al número 1-800-777-5331 o por
sobre la unidad que requiere servicio. En algunos casos el modelo puede haber sido discontinuado y
SPECTRA se reserva el derecho de ofrecer opciones alternativas de reparación o reemplazo.
SPECTRA MERCHANDISING INTERNATIONAL, INC.
4230 North Normandy Avenue,
Chicago, IL60634, USA.
1-800-777-5331
Para registrar su producto, siga el vínculo a continuación en el sitio web para ingresar su información.
User manual of JDTV-430, page 10
Printed in China
User manual of JDTV-430, page 11
|