®
PORTABLE STEREO SPEAKERS
USER MANUAL
SMPS-200
PLEASE READ THIS USER MANUAL COMPLETELY BEFORE OPERATING THIS UNIT
AND RETAIN THIS BOOKLET FOR FUTURE REFERENCE.
IMPORTANT SAFETY INSTRUCTIONS
When used in the directed manner, this unit has been designed and
manufactured to ensure your personal safety. However, improper use can result
in potential electrical shock or fire hazards. Please read all safety and operating
instructions carefully before installation and use, and keep these instructions
handy for future reference. Take special note of all warnings listed in these
instructions and on the unit.
1. Read these instructions – All the safety and operating instructions should be
read before the appliance is operated.
2. Keep these instructions – The safety and operating instructions should be kept
for future reference.
3. Heed all warnings – All warnings on the appliance and in the operating
instructions should be adhered to.
4. Follow all instructions – All operation and use instructions should be followed.
5. Do not use this apparatus near water – The appliance should not be used near
water; for example, near a bath tub, washbowl, kitchen sink, laundry tub, in a
wet basement, or near a swimming pool.
6. Clean only with dry cloth
–
The appliance should be cleaned only as
recommended by the manufacturer.
7. Do not block any ventilation openings. Install in accordance with the
manufacturer’s instructions. The appliance should be situated so that its
location or position does not interfere with its proper ventilation. For example,
the appliance should not be situated on a bed, sofa, rug, or similar surface that
may block the ventilation openings; or placed in a built-in installation, such as
a bookcase or cabinet that may impede the flow of air through the ventilation
openings.
8. Do not install near any heat sources such as radiators, heat registers, stoves,
or other apparatus (including amplifiers) that produce heat.
9. Only use attachments / accessories specified by the manufacturer.
10.Unplug this apparatus during lightning storms or when unused for long periods
of time.
11.Refer all servicing to qualified service personnel. Servicing is required when
the apparatus has been damaged in any way, such as power-supply cord or
plug is damaged, liquid has been spilled or objects have fallen into the
apparatus, the apparatus has been exposed to rain or moisture, does not
operate normally, or has been dropped.
12.This appliance shall not be exposed to dripping or splashing water and that no
object filled with liquids such as vases shall be placed on the apparatus.
13.Power Sources – The appliance should be connected to a power supply only
of the type described in the operating instructions or as marked on the
appliance. Do not overload wall outlet.
14.Danger of explosion if battery is incorrectly replaced. Replace only with the
same or equivalent type.
15.Do not attempt to dismantle, open or repair this product yourself. If a fault
occurs, seek advice from your local qualified service technician or contact the
distributor via the telephone number at the back of this instruction manual.
16.Caution marking and nameplate are located on bottom of product.
2
IMPORTANT NOTES
Avoid installing the unit in locations described below:
•
Places exposed to direct sunlight or close to heat radiating appliances such as
electric heaters.
•
•
Places subject to constant vibration.
Dusty, humid or moist places.
COMPLIANCE WITH FCC REGULATIONS
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may
cause undesired operation.
NOTE : This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in
a
residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:
-
-
-
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
-
Consult the dealer or an experienced radio/TV technician for help.
CAUTION: Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
PROTECT YOUR FURNITURE
This model is equipped with non-skid rubber 'feet' to prevent the product from
moving when you operate the controls. These 'feet' are made from non-migrating
rubber material specially formulated to avoid leaving any marks or stains on your
furniture. However certain types of oil based furniture polishes, wood
preservatives, or cleaning sprays may cause the rubber 'feet' to soften, and leave
marks or a rubber residue on the furniture. To prevent any damage to your
furniture we strongly recommend that you purchase small self-adhesive felt pads,
available at hardware stores and home improvement centers everywhere, and
apply these pads to the bottom of the rubber 'feet' before you place the product on
fine wooden furniture.
3
PRODUCT FEATURES
The SMPS-200 is a portable stereo speaker with the following features:
Auxiliary input jack to play music from your iPod or digital audio player
Play music from your computer via the USB port
Digital volume control
LOCATION OF CONTROLS
4
4
1
3
2
5
6
AUX-IN USB
7
1. VOLUME DOWN BUTTON
2. POWER ON/OFF BUTTON
3. VOLUME UP BUTTON
4. SPEAKER
5. AUX-IN JACK
6. MINI USB CONNECTOR
7. BATTERY COMPARTMENT
4
INSTALLATION
This unit can be operated either using 4 x “AAA” batteries (not included) or with a
USB power adaptor with a rating of DC 5V, 1000mA via the mini USB connector
on the back of the unit.
USE THE BATTERY POWER
1.) Open the cover of the Battery Compartment located at the bottom of the unit.
BOTTOM
AAA battery compartment
2.) Install 4 X DC1.5V 'AAA' (UM-4) batteries (not included) into the battery
compartment by following the polarity markings shown inside. Alkaline batteries
are recommended for longer playing time.
IMPORTANT: Be sure that the batteries are installed correctly. Wrong polarity
may damage the unit and void the warranty.
For best performance and longer operating time, we recommend
the use of good quality alkaline batteries.
3.) Replace the cover on the battery compartment.
4.) After prolonged use, the battery voltage may discharge to such a low level that
it cannot work properly. In that case, you need to replace them all at once with
fresh good quality batteries. Remove all exhausted batteries and follow above
procedures to replace new batteries.
Battery Note and Care
Danger of explosion if the battery is replaced incorrectly. Replace only with
the same type battery.
Only use a good quality known brand battery to ensure the longest life and
best performance.
If the unit is not used for an extended period of time, remove the battery. An
old or leaking battery can cause damage to the remote and may void the
warranty.
Do not dispose of batteries in fire. Batteries may leak or explode.
Do not try to recharge batteries that are not intended to be recharged; they
can overheat, rupture and leak (Follow battery manufacturer’s directions).
Only an adult should replace the battery.
5
USING USB POWER
1.) Plug the small end of the USB cable (included) into the mini USB connector on
the back of the unit.
2.) Plug the large end of the USB cable into your computer USB port if it supplies
5V DC, 1000mA or into a USB power adapter (not included) with an output
port with rating DC 5V 1000mA. Insert the AC adapter into a wall outlet.
NOTE: If you use a USB power adaptor to power up this unit, then you can only
play music via its AUX IN jack.
NOTE: These speakers are not magnetically shielded and may cause color
distortion on the screen of some TVs or video monitors. To avoid this, you may
need to move the speakers further away from the TV or monitor if unnatural color
shifts or image distortion occurs.
PLAY MUSIC BY AUXILIARY INPUT
This unit provides an auxiliary audio signal input jack for connecting external
audio devices like MP3 players, CD players and iPod/iPhones (except iPod
shuffle 3rd gen) and allow you to listen to your external source through the
speakers of this unit.
1.) Use an audio cable (included) with one 3.5 mm stereo plug on each end of the
cable.
2.) Plug one end into the AUX-IN jack on the main unit and the other end of the
cable into the Line-out Jack or Headphone Jack of your external audio device.
3.) Press the POWER
button to turn on the unit. The blue LED under
VOLUME UP/DOWN and POWER buttons lighting.
4.) Turn on your external audio device.
5.) Press the VOLUME UP/DOWN button to adjust the desired volume level.
Operate all other functions on the auxiliary device as usual.
NOTE:
(1) If you’re connected to the Line Out Jack of your external device then you only
need to adjust the volume control on the SMPS-200. If you’re connected to the
Headphone Jack of your external device, then you may need to adjust both the
volume control of your external device and the volume control on the
SMPS-200 to find the most desirable volume setting.
(2) Press the POWER
button to turning off the system when you finish
listening. Don't forget to switch off the power of your external device as well.
6
PLAYING MUSIC FROM YOUR COMPUTER
To play music from a Windows or Mac OS X based personal computers.
NOTE: (1) If you are using a USB power adaptor (not included) to power up this
unit, you can only play music from your computer via AUX IN jack of
this unit. Please refer to instructions in “PLAY MUSIC BY AUXILIARY
INPUT” section.
(2) When using the USB cable for an audio connection, you will not need
to connect the 3.5mm plug AUX IN cable.
Windows Based Computer (for Windows XP/ Vista/ 7)
1.) Plug the small end of the USB cable (included) to the mini USB connector on
the back of the unit and plug the large end of the USB cable into your
computer USB port.
Note: If your computer USB port supplies 5V DC, 1000mA of power to the unit,
you will not need battery power. Otherwise, please install batteries in order
to work the unit properly.
2.) Press the POWER
button to turn on the power of the unit, the computer will
report “Found New Hardware” the first time the USB port is accessed. Wait for
the computer to automatically search and install the necessary device drivers
for the USB audio device. Once installed, the PC will show “Your new
hardware is installed and ready to use” when the device drivers have been
properly installed.
3.) Your computer should automatically switch to use the SMPS-200 as a default
system speaker and will be ready to use. If not, please go to your computer
control panel and set the default audio sound playback device to the “USB
Audio Device”.
4.) Open the music player program on your computer, and adjust the volume of
the player program to a low level.
5.) Click the play button, and slowly increase the volume level of your player
program to adjust the sound level.
6.) Press the VOLUME UP/DOWN button on the unit to control the sound level if
necessary.
Mac Based Computer (for Mac OS X 10.5 and 10.6)
1.) Plug the small end of the USB cable (included) to mini USB connector on the
back of the unit and plug the large end into your computer USB port.
Note: If your computer USB port supplies 5V DC, 1000mA of power to the unit,
you will not need battery power. Otherwise, please install batteries in order
to work the unit properly.
Download from Www.Somanuals.com7. All Manuals Search And Download.
2.) Press the POWER
button to turn on the power of the unit to let your
computer detected this USB audio device. Your computer should automatically
switch to use this unit as a default system speaker after successful detection.
If not, please go to your computer system preferences and set default sound
output to “USB Audio Device”.
3.) Open the music player program on your computer, and adjust the volume of
the player program to a low level.
4.) Click the play button, and slowly increase the volume level of your player
program to adjust the sound level.
5.) Press the VOLUME UP/DOWN button on the unit to control the sound level if
necessary.
RESETTING
If the system does not respond or has intermittent operation, disconnect the USB
power and remove the batteries. Wait one minute and reconnect the main power
or install the batteries again.
CARE AND MAINTENANCE
1. Avoid operating your unit under direct sunlight or in hot, humid or dusty places.
2. Keep your unit away from heating appliances and sources of electrical noise such as
fluorescent lamps or motors.
3. For better Clock Display clarity, avoid operating the unit under direct sunlight or in
strong room illumination.
4. Unplug the unit from the electrical power outlet immediately in case of malfunction.
CLEANING THE UNIT
To prevent fire or shock hazard, disconnect your unit from the AC power source when
cleaning.
The finish on the unit may be cleaned with a dust cloth and cared for as other
furniture, Use caution when cleaning and wiping the plastic parts.
If the cabinet becomes dusty wipe it with a soft dry dust cloth. Do not use any wax or
polish sprays on the cabinet.
If the front panel becomes dirty or smudged with fingerprints it may be cleaned with a
soft cloth slightly dampened with a mild soap and water solution. Never use abrasive
cloths or polishes as these will damage the finish of your unit.
CAUTION: Never allow any water or other liquids to get inside the unit while
cleaning.
8
TROUBLESHOOTING GUIDE
Symptom
Possible Problem
Solution
No batteries installed or
installed batteries are
exhausted.
Install 4 x “AAA” batteries or replace the
exhausted batteries.
USB power source no
function or USB cable is not use an USB output of AC adaptor, turn on
Plug the AC adaptor into a wall outlet if you
The unit does
not respond
(no power).
plugged into the mini USB
connector on the back of
the unit.
Wall outlet is not
functioning.
your computer if you use a computer USB
port and plug the small end of the USB cable
into the mini USB connector on the unit.
Plug another device into the same outlet to
confirm the outlet is working.
Batteries are exhausted
Replace the batteries.
Computer USB port not
work
Try another USB port of computer or try
another computer.
Computer not select “USB
Audio Device” as default
audio output device
Follow “PLAYING MUSIC FROM YOUR
COMPUTER” section instruction in this
manual to set it.
No Sound
Press the VOLUME UP button to turn the
sound level up.
Volume set too low
Volume level is set too high. Decrease the volume.
If original sound source is of poor quality,
distortion and noise are easily noticed with
high-power speakers. Try a different audio
source such as a music CD.
If you are using an external sound source like
iPod, try reducing the output volume on the
device itself. Also try turning bass boost OFF
or change the EQ setting.
Sound is
distorted.
Sound source is distorted.
Unit gets warm
after extended
play at high
volume.
Turn the unit off for a period of time or lower
volume.
This is normal.
SPECIFICATIONS
Power Requirement
Main unit
4 x “AAA” (UM-4) batteries or
USB power DC 5V, 1000mA (max)
At Spectra, environmental and social responsibility is a
core value of our business. We are dedicated to
continuous implementation of responsible initiatives with
an aim to conserve and maintain the environment through
responsible recycling.
green initiatives or to find a recycler in your area.
9
90 DAY LIMITED WARRANTY AND SERVICE
VALID IN THE U.S.A ONLY
SPECTRA MERCHANDISING INTERNATIONAL, INC. warrants this unit to be free from defective
materials or factory workmanship for a period of 90 days from the date of original customer
purchase and provided the product is utilized within the U.S.A. This warranty is not assignable or
transferable. Our obligation under this warranty is the repair or replacement of the defective unit
or any part thereof, except batteries, when it is returned to the SPECTRA Service Department,
accompanied by proof of the date of original consumer purchase, such as a duplicate copy of a
sales receipt.
You must pay all shipping charges required to ship the product to SPECTRA for warranty service.
If the product is repaired or replaced under warranty, the return charges will be at SPECTRA’s
expense. There are no other express warranties other than those stated herein.
This warranty is valid only in accordance with the conditions set forth below:
1. The warranty applies to the SPECTRA product only while:
a. It remains in the possession of the original purchaser and proof of purchase is
demonstrated.
b. It has not been subjected to accident, misuse, abuse, improper service, usage outside the
descriptions and warnings covered within the user manual or non-SPECTRA approved
modifications.
c. Claims are made within the warranty period.
2. This warranty does not cover damage or equipment failure caused by electrical wiring not in
compliance with electrical codes or SPECTRA user manual specifications, or failure to provide
reasonable care and necessary maintenance as outlined in the user manual.
3. Warranty of all SPECTRA products applies to residential use only and is void when products are
used in a nonresidential environment or installed outside the United States.
This warranty gives you specific legal rights, and you may also have other rights which vary from
state to state. TO OBTAIN SERVICE please remove all batteries (if any) and pack the unit carefully
and send it freight prepaid to SPECTRA at the address shown below. IF THE UNIT IS RETURNED
WITHIN THE WARRANTY PERIOD shown above, please include a proof of purchase (dated cash
register receipt) so that we may establish your eligibility for warranty service and repair of the unit
without cost. Also include a note with a description explaining how the unit is defective. A customer
service representative may need to contact you regarding the status of your repair, so please
include your name, address, phone number and email address to expedite the process.
IF THE UNIT IS OUTSIDE THE WARRANTY PERIOD, please include a check for $8.00 to cover
the cost of repair, handling and return postage. All out of warranty returns must be sent prepaid.
It is recommended that you contact SPECTRA first at 1-800-777-5331 or by email at
the model you have may be discontinued, and SPECTRA reserves the right to offer alternative
options for repair or replacement.
SPECTRA MERCHANDISING INTERNATIONAL, INC.
4230 North Normandy Avenue,
Chicago, IL60634, USA.
1-800-777-5331
To register your product, visit the link on the website below to enter your information.
Printed in China
10
|