Stainless Steel
1.5L Kettle
KSK400
Issue 01/07
KSK400.indd
1
9/5/07 11:47:04 AM
appliance, when the appliance is not in use
and before cleaning or storing. Allow all parts
to cool before cleaning.
KambrooK Safety
Welcome to Kambrook and your new
Stainless Steel 1.5L Kettle.
featUreS of yoUr KambrooK StaINLeSS SteeL 1.5L KettLe
Do not move the kettle from the power
base during operation. Ensure the kettle has
switched to ‘OFF’ position, after the water
has boiled, before removing the kettle from
the power base.
At Kambrook, we believe that safe
performance of our products is the first
priority in any consumer product so that you,
our valued customer, can confidently use and
trust our appliances.
2
Do not touch hot surfaces. Use the handle
for lifting and carrying the appliance.
1
We ask that any electrical appliance
that you use be operated in a sensible
fashion with due care and attention
placed on the following important
operating instructions:
Keep the appliance clean. Refer to care and
cleaning (Page 4).
The appliance is not intended for use by
young children or infirm persons unless
they have been adequately supervised by a
responsible person to ensure that they can
use the appliance safely.
ImPortaNt SafeGUarDS for
yoUr KambrooK StaINLeSS
SteeL 1.5L KettLe
Carefully read all instructions before
operating the appliance and retain for future
reference.
Young children should be supervised to
ensure that they do not play with the
appliance.
3
Remove any packaging material and
promotional labels before using the kettle for
the first time.
Do not leave the appliance unattended when
in use.
This appliance has been designed specifically
for the purpose of boiling drinking quality
water only. Under no circumstances should
this product be used to boil any other liquids
or foodstuffs.
It is recommended to regularly inspect the
appliance. Do not use the appliance if power
supply cord, plus and appliance becomes
damaged in any way. Return the entire
appliance to the nearest authorised
Kambrook Service Centre for examination
and/or repair. Please call 1300 139 798 for
service centre details.
Do not place the kettle near the edge of a
table, counter or bench top during operation.
Ensure that the surface is level, clean and free
of water.
Any maintenance other than cleaning should
be performed at an authorised Kambrook
Service Centre.
Do not let the cord hang over the edge of
a table or counter, touch hot surfaces or
become knotted. Fully unwind the cord
before use.
4
This appliance is intended for household use
only. Do not use this appliance for other
than its intended use. Do not use in moving
vehicles or boats. Do not use outdoors.
Keep kettle clear of walls, curtains and other
heat or steam sensitive materials. Minimum
200mm distance.
The installation of a residual current device
(safety switch) is recommended to provide
additional safety protection when using
electrical appliances. It is advisable that a
safety switch with a rated residual operating
current not exceeding 30mA be installed in
the electrical circuit supplying the appliance.
See your electrician for professional advice.
7
Do not place on or near a hot gas or electric
burner, or where it could touch a heated
oven.
5
Do not use on metal surfaces, for example, a
sink drain board.
6
To protect against electric shock, do not
immerse the kettle base, switch area, power
base, power supply cord or plug in water or
allow moisture to come in contact with these
parts.
DO nOT OPERATE ThE KETTLE On
An InCLInED SURFACE. DO nOT MOvE
ThE KETTLE WhILE IT IS SWITChED On.
5. Cord storage.
1. Removable filter for cleaner water.
2. Safety locking lid.
Always ensure the kettle switch is in the
‘OFF’ position, then turn the power off at the
power outlet and remove the plug from the
power outlet before attempting to move the
6. Multi directional cordless base.
7. 2200 watt concealed element
3. Water window.
4. Power on/off switch.
ꢀ
ꢁ
KSK400.indd 2-3
9/5/07 11:47:07 AM
power base supplied. Use caution when pouring
water from your kettle as boiling water will scald.
Do not pour water too quickly.
The filter can be cleaned by running under hot
water and rubbing with a soft cleaning cloth
or brush. To replace the filter, simply press
the filter down firmly into the slot behind the
spout of the kettle.
oPeratING yoUr KambrooK
StaINLeSS SteeL 1.5L KettLe
before fIrSt USe
NoTe: Do not remove the kettle from the power
base during operation. ensure the kettle has
switched to ‘oFF’ position after the water has
boiled before removing the kettle from the power
base.
Remove any packaging material and
promotional labels before using the kettle for
the first time.
TIP: The filter could become damaged with
time, please check regularly and replace if found
damaged
It is recommended that before the first use to
fill the kettle to the maximum level with cold
tap water, bring to the boil and then discard
the water. (TIP: add a few slices of lemon for a
fresher scent). Your kettle will only operate
when positioned on the power base with the
On/OFF switch in the On position. The
kettle will automatically switch off once the
water is boiled.
mINeraL DePoSItS aND
DISCoLoUratIoN
WARnInG: This appliance is designed
for the boiling of drinking quality water only.
never use it to heat or boil any other liquids
or foodstuff. The lid should always be firmly in
place when using.
Due to the large surface area of the concealed
element interior base, discolouration due to
mineral deposits from tap water may appear
more obvious by leaving a brown stain on the
base. THIS IS NoT RUST.
WARnInG: Do not release the lid while
the water is boiling. Ensure the lid is closed
whilst boiling.
To remove the discolouration, follow the
instructions “Removing mineral deposits”.
oPeratIoN of yoUr KettLe
Safety boIL Dry ProteCtIoN
1. To fill the kettle with water, remove it from
the power base and open the lid by pressing
the lid release button on top of the handle.
The lid will automatically open. Fill with the
desired amount of water. Do not operate
the kettle without water. Always fill the
kettle between the minimum and maximum
marks on the water window. Too little water
will result in the kettle switching off.
removING mINeraL DePoSItS
The kettle is fitted with a safety device, which
protects against overheating should your
appliance be operated with insufficient water.
If this occurs the kettle will stop heating and
automatically switch off.
Mineral deposits in tap water may cause the
kettle interior and water window to discolour
over time. This may be removed by using a
proprietary kettle descaler which is available
from most leading supermarkets, department
stores and hardware stores.
Should this occur, switch off at the power
outlet and unplug. Allow kettle to cool before
refilling. When the kettle has cooled down, the
safety device will automatically reset when the
kettle has cooled down.
aLterNatIveLy:
2.Ensure that the lid is closed and locked firmly
into position before placing the kettle on the
power base.
1. Fill the kettle until ²/ full with 1 part vinegar
³
(or a few slices of lemon) and 2 parts water,
bring to the boil and allow to stand
overnight.
Care aND CLeaNING
3. Place the kettle firmly onto the power base.
Plug the cord into a 230/240v power outlet
and switch on.
Always switch appliance off, then switch off
at the power outlet and then unplug before
cleaning the appliance.
2.Empty the solution from the kettle. Fill
the kettle with clean water, bring to boil and
discard the water. Repeat and the kettle will
be ready for use.
4.Press the On/OFF switch down to the
‘On’ position. The water level window will
illuminate.
CLeaNING the KettLe exterIor
The outside stainless steel surface of the kettle
may be wiped over with a damp cloth and
polished with a soft, clean dry cloth.
WARnInG: never immerse the kettle
base, switch area, power base, power supply
cord or power plug in water, or allow moisture
to come into contact with these parts.
5. The kettle will automatically switch off once
the water has boiled. Lift the kettle from
the power base and pour the water. Take
care to hold the kettle level, especially when
filled to the maximum level. To re-boil it may
be necessary to wait for a few seconds to
allow the control to reset.
NoTe: Do not use chemicals, steel wool, or
abrasive cleaners to clean the outside of the kettle.
StoraGe
WARnInG: nEvER IMMERSE ThE
KETTLE BASE, SWITCh AREA, POWER
BASE, POWER SUPPLY CORD OR POWER
PLUG In WATER OR ALLOW MOISTURE
TO COME In COnTACT WITh ThESE
PARTS.
Ensure the kettle is switched off, cleaned and
dried before storing. Ensure that the lid is
closed and locked firmly into place.
The kettle should be stored on its power base
when not in use. The power outlet should be
switched off and the power cord unplugged
from the power outlet when not in use.
Wrap the power cord around the cord
storage under the power base. Stand the
kettle upright on the power base. Do not
store anything on top.
CLeaNING the removabLe fILter
NoTe: Never operate the kettle dry - too little
water will result in the kettle switching off.
The Kambrook Stainless Steel 1.5L Kettle
features a removable mesh filter to filter out
scale deposits for cleaner water. To remove
the scale deposits, remove the filter by opening
the lid of the kettle. Pull the filter firmly to
remove.
Do not overfill the kettle - filling above the
maximum mark on the water window may
result in boiling water splashing from the
kettle.
NoTe: This kettle must only be used with the
ꢂ
ꢃ
KSK400.indd 4-5
9/5/07 11:47:07 AM
Notes
Notes
ꢄ
ꢅ
KSK400.indd 6-7
9/5/07 11:47:08 AM
|