INSTRUCTIONS FOR CHARGING YOUR CORDLESS DIGITAL PREP SCOPE
1. Plug in the square pin connector of the USB cable to the back of the Cordless
Digital Prep Scope.
2. Then connect the opposite end to the USB port of your computer.
3. While your computer is on the microscope will recharge. You can use your
computer for other applications while the microscope is recharging. NOTE: you do
not have to fully discharge or drain the battery to recharge.
WARNING
Nickel Metal Hydride Battery
Regular charge 8 hours - Do Not Overcharge
Do not use non-rechargeable batteries. Only use the
rechargeable NIMH battery provided by Ken-A-Vision.
Do Not put battery pack in fire or mutilate, battery may burst
or release toxic materials that may cause burns!
SYSTEM RECOMMENDATIONS:
Pentium II 433 mhz
Mircosoft Internet Explorer 5.0
128mb of RAM
Windows 98, 2000, ME, XP
8mb video (24bit color)
Direct X 8.1
CARE AND MAINTENANCE
Your Cordless Digital Prep Scope is a fine precision instrument and
should be treated with care. When not in use it should be protected from dust by
the plastic cover provided. Lenses and eyepieces should be cleaned periodically
with optical lens tissue which is soft and lint free. Painted surfaces can be cleaned
with a moistened cloth.
Ken-A-Vision has qualified technicians on staff to repair and service all
your microscopes. Contact us at 1.816.353.4787 for more details.
Ken-A-Vision reserves the right to make design improvements and other changes in accor-
dance with the latest technology. There is no obligation to make changes in products already manufac-
tured. Copy Right 2003 Ken-A-Vision Corporation.
Cordless Digital Prep
Scope
WARRANTY: ONE YEAR (CAMERA) AND TEN YEAR MICROSCOPE WARRAN-
TY AGAINST DEFECTIVE PARTS AND WORKMANSHIP.
Instruction Manual
T-1252C
5615 Raytown Road, Kansas City, MO 64133 U.S.A Tel. 816-353-4787 Fax. 816-358-5072
INS-SC50DVPC
|