TUMBLE ACTION WASHER
Use & Care Guide
LAVADORACON TAMBOREACCIÓN
Manual de Uso & Mantenimiento
Models/Modelos: 48102, 48106, 48112, 48116
For best results a low-
sudsing, HE High Efficiency
Detergent made for front
loading washers must be
used.
Para mejores resultados,
debeutilizarseun
detergentedebajaespuma
y alta eficiencia (HE),
recomendado para
Lavadorasdecargafrontal.
P/N 134906900B (0712)
Sears, Roebuck and Co., Hoffman Estates, IL 60179 U.S.A.
1
Important Safety Instructions
SAVE THESE INSTRUCTIONS
Read all instructions before using this washer.
You can be killed or seriously injured if you don't follow these Important Safety Instructions:
• Failure to comply with these warnings could result in serious personal injuries.
Prevent Fire
• Do not wash items that have been previously cleaned in, soaked in, or spotted with gasoline, cleaning solvents, kerosene,
cooking oils, waxes, etc. Do not store these items on or near the washer. These substances give off vapors or chemical
reactions that could ignite or explode.
• Do not put oily or greasy rags or clothing on top of the washer. These substances give off vapors that could ignite the materials.
• Do not add gasoline, cleaning solvents, or other flammable or explosive substances to the wash water. These substances
give off vapors that could ignite or explode.
• Under certain conditions, hydrogen gas may be produced in a hot water system that has not been used for 2 weeks or more.
HYDROGEN GAS IS EXPLOSIVE. If the hot water system has not been used for such a period, before using the washer,
turn on all hot water faucets and let the water flow from each for several minutes. This will release any accumulated hydrogen
gas. Hydrogen gas is flammable; do not smoke or use an open flame during this time.
• Do not store or use gasoline or other flammable vapors or liquids in the vicinity of this or any other appliance.
• Failuretocomplywiththesewarningscouldresultinfire, explosion, seriousbodilyinjuryand/ordamagetotherubberorplastic
parts of the washer.
Protect Children
• Do not allow children to play on or in the washer. Close supervision of children is necessary when the washer is used near
children. As children grow, teach them the proper, safe use of all appliances.
• Destroy the carton, plastic bag and other packing materials after the washer is unpacked. Children might use them for play.
Cartons covered with rugs, bedspreads or plastic sheets can become airtight chambers.
• Keep laundry products out of children's reach. To prevent personal injury, observe all warnings on product labels.
• Before the washer is removed from service or discarded, remove the washer door to prevent accidental entrapment.
• Failure to comply with these warnings could result in serious personal injuries.
Prevent Injury
• To prevent shock hazard and assure stability during operation, the washer must be installed and electrically grounded by a
qualified service person in accordance with local codes. Installation instructions are packed in the washer for installer's
reference. Refer to INSTALLATION INSTRUCTIONS for detailed grounding procedures. If the washer is moved to a new
location, have it checked and reinstalled by a qualified service person.
• To prevent personal injury or damage to the washer, the electrical power cord of the washer must be plugged into a properly
grounded and polarized 3-prong outlet. The third grounding prong must never be removed. Never ground the washer
to a gas pipe. Do not use an extension cord or an adaptor plug.
• Follow package directions when using laundry products. Incorrect usage can produce poisonous gas--resulting in serious
injury or death.
- Do not combine laundry products for use in 1 load unless specified on the label.
- Do not mix chlorine bleach with ammonia or acids such as vinegar.
• To prevent serious personal injury and damage to the washer:
- All repairs and servicing must be performed by an authorized servicer unless specifically recommended in this
Owner's Guide. Use only authorized factory parts.
- Do not tamper with controls.
- Do not install or store the washer where it will be exposed to the weather.
- Do not install on carpet. Install washer on a solid floor. It may be necessary to reinforce the floor to prevent vibration or
movement.
• To reduce the risk of electric shock, disconnect this appliance from the power supply before attempting any user maintenance.
Turning the controls to the OFF position does not disconnect this appliance from the power supply.
• To prevent injury, do not reach into the washer while parts are moving. Before loading, unloading or adding items, push in
the cycle selector knob and allow the drum to coast to a complete stop before reaching inside.
• Failure to comply with these warnings could result in serious personal injuries.
• This washer is equipped with an electrical overload protector. The motor will stop if it becomes overheated. The washer will
automatically restart after a cool down period of up to 30 minutes, if the washer has not been manually turned off during this
time.
Printed in U.S.A.
3
Important Safety Instructions(continued)
Do not use or mix liquid
chlorine bleach with other household
chemicalssuchastoiletcleaners,rustremovers,
acid or products containing ammonia. These
mixtures can produce dangerous fumes which
can cause serious injury or death.
Do not under any
Avoid fire
Grounding type
wall receptacle
circumstances, cut,
remove, or bypass the
grounding prong from
this plug.
hazard or electrical shock.
Donotuseanadaptorplug
or extension cord or
remove grounding prong
fromelectricalpowercord.
Failure to follow this
warning can cause serious
injury, fire or death.
Power supply cord with 3-prong grounding plug
CORRECT
Use this way ONLY
•
•
•
Follow the guidelines below for preparing the wash load.
Read the Operating Instructions for operating your specific model.
Always read and follow fabric care and laundry product labels.
Washing Procedures
To reduce the risk of fire, electrical shock, or injury to persons, read
Important Safety Instructions before operating this washer.
1. Sort laundry into loads that can be washed together.
Sort items by recommended water temperatures and wash time.
•
•
Separatewhite,light,andcolorfastitemsfromdarkandnoncolorfastitems.
Separate items which shed lint from items which attract lint. Permanent
press, synthetic, knit and corduroy items will pick up lint from towels, rugs
and chenille bedspreads.
Sort laundry into loads that can be washed
together.
•
•
•
Separate heavily soiled items from lightly soiled items.
Separate lacy, sheer and loosely knit items from sturdy items.
Do not machine wash items containing fiberglass. Small particles of
fiberglass left in the drum may stick to fabrics in other loads and cause skin
irritation.
2. Prepare items for washing.
•
•
•
Empty pockets.
Brush off lint and dirt. Shake out rugs and beach towels.
Closezippers,fastenhooks,tiestringsandsashes,andremovenonwashable
trims and ornaments.
Empty pockets.
•
Removepins,decorativebuttons,beltbuckles,andotherobjectswhichcould
be damaged. This also helps protect other items in the wash load.
Mend rips and tears to prevent further damage during washing.
Placedelicateitemssuchasbras, shoulderpads, hosiery, andbeltsinamesh
bag to prevent tangling during the wash cycle.
•
•
•
Turn knit items inside out to prevent pilling.
3. Pretreat stains and heavy soil.
Place delicate items in a mesh bag.
See Stain Removal for details.
4. Add laundry load to washer.
•
Combine large and small items in a load. Load large items first. Large items
should not be more than half the total wash load.
•
Washing single items such as a sweater, towel or jeans may cause an out-
of-balance load. Add 1 or 2 similar items to help balance the load.
Single heavy items such as a bedspread can be washed separately.
The washer can be fully loaded, but the items should not be tightly packed.
The door should close easily.
•
•
Add laundry load to washer.
4
5. Add detergent, bleach and fabric softener to automatic dispenser following these steps:
A. OPENING AND CLOSING THE DISPENSER DRAWER
C. LIQUID BLEACH
• Slowly open the dispenser drawer by first sliding the
safety latch to the right, then pulling the drawer out
until it stops.
• After adding laundry products, slowly close the
dispenser drawer. Closing the drawer too quickly
could result in early dispensing of bleach or fabric
softener.
• If desired, measure out the recommended amount of
liquid chlorine bleach (not to exceed 1/3 cup (80 mL))
and pour it into the center compartment labeled
"Liquid Bleach" and marked with this symbol
.
• Fill to the mininum fill line (MIN.)for small loads. Fill
tothemaximumfillline(MAX.)forlargeloads. Donot
exceed the maximum fill line. Overfilling can cause
early dispensing of the bleach which could result in
damaged clothes.
• Do not pour undiluted liquid chlorine bleach directly
onto the load or into the drum. Fabric damage can
occur.
Note: From time to time you may see water in the
bleach and fabric softener compartments. This is a
result of the siphoning action and is part of the normal
operation of the washer.
• Add powder color-safe bleach to the detergent
dispenser.
B. DETERGENT
D. FABRICSOFTENER
• Detergentisflushedfromthedispenseratthebeginning
of the cycle. Either powdered or liquid detergent can
be used. Note: Liquid detergent will drain into the
washer drum as it is added.
• Addalow-sudsing,high-efficiencydetergentmadefor
front-loadingwasherstothedispenserchamber. Look
• If desired, pour the recommended amount of fabric
softener into the compartment labeled "Fabric
Softener" and marked with this symbol
• Fill to the mininum fill line (MIN.) for small loads. Fill
tothemaximumfillline(MAX.)forlargeloads. Donot
exceed the maximum fill line. Overfilling can cause
early dispensing of the fabric softener which could
result in stained clothes.
.
for this symbol
on the detergent label.
• Do not pour fabric softener directly on the wash
load.
• Use of a fabric softener dispensing ball is not
Use the cap or scoop provided by the detergent
manufacturertomeasuretheamountrecommended.
• Color-safebleach,waterconditioner,detergentbooster
and enzyme products may be added to the detergent
compartment. Avoid mixing liquids and powders.
• Detergent usage may need to be adjusted for water
temperature, water hardness, load size and soil level.
• For best results, avoid oversudsing.
recommended in tumble action washers.
5
Washing Procedures Con't
6. Selectthecycle,temperature,spinspeed,optionsandfeaturesaccording
totype,size,andsoillevelofeachload. Startthewasher. (SeeOperating
Instructions for your specific model.)
7. Remove items when the cycle is completed.
Place washed items in automatic dryer, line dry, or dry flat as directed by fabric
care label. Excess wrinkling, color transfer or odors may develop in items left in
the washer after the cycle has ended.
8. General Precautions
• If the dispenser drawer is opened during operation, the washer will
shut off. Slowly close the dispenser drawer, and press START to continue
• Donotslamthewasherdoorclosedortrytoforcethedooropenwhen
DOOR LOCK light is on. This could result in damage to the washer.
• DO NOT leave the washer door open. An open door could entice children
to hang on the door or crawl inside the washer. Note: If there are no small
children present, leave the door ajar to prevent odor build up and to improve
ventingoftheunit.
• To avoid damaging the washer and personal injury, DO NOT hang on or lean
against the washer door.
• Do not place detergent, bleach or fabric softener containers on top of the
washer. They can damage the finish or controls.
As an ENERGY STAR® Partner,
Sears Inc., has determined
Do not store or place laundry products on
top of washer at any time. They can damage
the finish or controls.
that this product meets the ENERGY STAR®
guidelines for energy efficiency.
Stain Removal
Safe Stain Removal Procedures
Do not use or mix liquid
chlorine bleach with other household
chemicals such as toilet cleaners, rust
removers, acid or products containing
ammonia. These mixtures can produce
dangerous fumes which can cause
serious injury or death.
To reduce the risk of fire or serious injury to persons or property,
comply with the basic warnings listed below:
• Read and comply with all instructions on stain removal products.
• Keep stain removal products in their original labeled containers and out of
children's reach.
• Thoroughly wash any utensil used.
• Do not combine stain removal products, especially ammonia and chlorine
bleach. Dangerous fumes may result.
• Never wash items which have been previously cleaned in, washed in, soaked
in or spotted with gasoline, dry cleaning solvents or other flammable or
explosive substances because they give off vapors that could ignite or
explode.
• Never use highly flammable solvents, such as gasoline, inside the home.
Vapors can explode on contact with flames or sparks.
For successful stain removal:
•
Remove stains promptly.
•
Determine the kind of stain, then follow the recommended treatment in the
stain removal chart below.
•
To pretreat stains, use a prewash product, liquid detergent, or a paste made
from granular detergent and water.
•
•
•
•
Use cold water on unknown stains because hot water can set stains.
Check care label instructions for treatments to avoid on specific fabrics.
Check for colorfastness by testing stain remover on an inside seam.
Rinse and wash items after stain removal.
Follow fabric care label instructions.
6
Stain Removal
STAIN
TREATMENT
Adhesive tape, chewing
gum, rubber cement
Apply ice. Scrape off excess. Place stain face down on paper towels. Saturate with prewash stain
remover or nonflammable dry cleaning fluid.
Baby formula, dairy
products, egg
Use product containing enzymes to pretreat or soak stains. Soak for 30 minutes or more. Wash.
Pretreat stain. Wash using cold water and bleach safe for fabric.
Beverages (coffee, tea,
soda,juice, alcoholic
beverages)
Blood
Rinse with cold water. Rub with bar soap. Or, pretreat or soak with product containing enzymes. Wash
using bleach safe for fabric.
Candle wax, crayon
Scrape off surface wax. Place stain face down between paper towels. Press with warm iron until wax is
absorbed. Replace paper towels frequently. Treat remaining stain with prewash stain remover or
nonflammable dry cleaning fluid. Hand wash to remove solvent. Wash using bleach safe for fabric.
Chocolate
Pretreat or soak in warm water using product containing enzymes. Wash using bleach safe for fabric.
Pretreat with prewash stain remover or rub with bar soap.
Collar or cuff soil,
cosmetics
Dye transfer on white fabric
Grass
Use packaged color remover. Wash using bleach safe for fabric.
Pretreat or soak in warm water using product containing enzymes. Wash using bleach safe for fabric.
Grease, oil, tar (butter, fats,
salad dressing, cooking
oils, car grease, motor oils)
Scrape residue from fabric. Pretreat. Wash using hottest water safe for fabric. For heavy stains and tar,
apply nonflammable dry cleaning fluid to back of stain. Replace towels under stain frequently. Rinse
thoroughly. Wash using hottest water safe for fabric.
Ink
Some inks may be impossible to remove. Washing may set some inks. Use prewash stain remover,
denatured alcohol or nonflammable dry cleaning fluid.
Mildew, scorch
Wash with chlorine bleach if safe for fabric. Or, soak in oxygen bleach and hot water before washing.
Badly mildewed fabrics may be permanently damaged.
Mud
Brush off dry mud. Pretreat or soak with product containing enzymes.
Pretreat with prewash stain remover. Wash using bleach safe for fabric.
Mustard, tomato
Nail polish
May be impossible to remove. Place stain face down on paper towels. Apply nail polish remover to
back of stain. Repeat, replacing paper towels frequently. Do not use on acetate fabrics.
Paint, varnish
Perspiration
WATER BASED: Rinse fabric in cool water while stain is wet. Wash. Once paint is dry, it cannot be
removed. OIL BASED AND VARNISH: Use solvent recommended on can label. Rinse thoroughly before
washing.
Use prewash stain remover or rub with bar soap. Rinse. Wash using nonchlorine bleach in hottest
water safe for fabric.
Rust, brown or yellow
discoloration
For spots, use rust remover safe for fabric. For discoloration of an entire load, use phosphate detergent
and nonchlorine bleach. Do not use chlorine bleach because it may intensify discoloration.
Shoe polish
LIQUID: Pretreat with a paste of granular detergent and water. PASTE: Scrape residue from fabric.
Pretreat with prewash stain remover or nonflammable dry cleaning fluid. Rinse. Rub detergent into
dampened area. Wash using bleach safe for fabric.
Urine, vomit, mucus, feces
Pretreat or soak in product containing enzymes. Wash using bleach safe for fabric.
7
Common Washing Problems
Many washing problems involve poor soil and stain removal, residues of lint and scum, and fabric damage. For
satisfactory washing results, follow these suggestions provided by The Soap and Detergent Association.
PROBLEM POSSIBLE CAUSES
SOLUTIONS
PREVENTIVE MEASURES
Blue stains
•Undiluted liquid detergent or
fabric softener dispensed directly
onto fabric.
•If caused by detergent, mix 1 cup (240
ml) white vinegar with 1 quart (.95 L)
water in a plastic container. Soak item 1
hour. Rinse.
•Avoid overfilling detergent and fabric
softener compartments of dispenser.
•If caused by fabric softener, rub stains
with bar soap. Wash.
Discoloration,
graying
•Not enough detergent.
•Wash water temperature too low.
•Incorrect sorting.
•Rewash with correct amount of
detergent and hottest water safe for
fabric. Add bleach safe for fabric.
•Sort items by soil level and color.
•Use correct amount of detergent, hottest
water and bleach safe for fabric.
Greasy, oily stains •Not enough detergent.
•Undiluted liquid fabric softener
poured directly on fabric.
•Treat with prewash stain remover or
liquid detergent.
•Increase detergent and water
temperature. Rewash.
•Use correct amount of detergent and
hottest water safe for fabric.
•Do not pour liquid fabric softener directly
on fabric. See Washing Procedures for
directions on adding softener.
•Rub fabric softener stains with bar soap.
Holes, tears, or
snags
•Incorrect use of chlorine bleach.
•Unfastened zippers, hooks,
buckles.
•Rips, tears and broken threads.
•Overloading the washer.
•Degradation of fabric.
•May be irreversible if rips, tears and
seams cannot be mended.
•Never pour chlorine bleach directly on
fabric.
•Check condition of items before washing.
See Washing Procedures for preparing
and loading the wash load and adding
chlorine bleach.
Lint
•Incorrect sorting.
•Reduce load size. Rewash using correct •See Washing Procedures for sorting and
•Tissues left in pocket.
•Overloading the washer.
•Not enough detergent.
•Undissolved detergent has left
a residue resembling lint.
•Static cling is attracting lint.
•Load washed too long.
water temperature, water level, and
amount of detergent.
preparing the wash load.
•Do not overload washer.
•Use correct temperature and amount of
detergent, water and wash time.
•Add nonprecipitating water conditioner
to wash water to remove detergent
residue.
•Add liquid fabric softener to final rinse.
•Dry load in dryer.
•Remove lint with lint brush or roller.
Pilling
•Pilling is normal with synthetic
and permanent press fabrics.
This is due to abrasion from
normal wear.
• Use a lint brush or shaver to remove
pills.
•Use fabric softener in the washer to
lubricate fibers.
•When ironing, use spray starch or fabric
finish on collars and cuffs.
(Fibers break off,
ball up and cling to
fabric.)
•Turn items inside out to reduce abrasion.
Residue or
powder on dark
items;
Stiff, harsh
fabrics.
•Undissolved detergent.
• Some granular detergents can
combine with hard water
minerals to form a residue.
•Overloading the washer.
• Rewash load.
•Increase water temperature using hottest
water safe for fabric.
•Do not overload washer.
•Use liquid detergent or use nonprecipitating
water conditioner with granular detergent.
Wrinkling
•Overloading the washer.
•Incorrect wash cycle for wash
load.
•Reduce load size.
•Do not overload washer.
•Remove items from washer as soon as
cycle is completed.
•Rinse in cold water with liquid fabric
softener using the Perm Press or
Delicate cycle.
•Use liquid fabric softener.
Yellow buildup of •Agitation time too short.
•Soak in detergent booster or product
containing enzymes.
•Wash in hot water using full permanent
press cycle. Increase detergent.
Add bleach safe for fabric.
•Select correct wash cycle.
•Use correct amount of detergent.
•Wash synthetics frequently using hot or
warm water.
body soil on
•Wash water temperature too
synthetic fabrics
low.
•Not enough detergent.
•Or, treat with color remover.
Yellow or brown
rust stains
•To restore discolored load of whites,
use rust remover safe for fabric.
•Do not use chlorine bleach to remove
rust stains. It may intensify discoloration. •Drain water heater occasionally.
•For an ongoing problem, install an iron filter
•Use nonprecipitating water softener.
•Before washing, run hot water for a few
minutes to clear lines.
•Iron or manganese in water
supply, water pipes, or water
heater.
in your water supply system.
8
TO REFRESH OR CLEAN INSIDE OF THE WASHER:
IMPORTANT: Do not load garments or other items in the washer when cleaning the
inside of the washer.
Care and Cleaning
•
Add a 1/2 cup of liquid bleach to the detergent compartment of the dispenser
drawer and fill the bleach dispenser compartment to the Max Fill level and run
WITHOUT a clothes load using the Normal Cycle setting.
For other Inside Cleaning
•
•
Unplug the electrical power cord to avoid electrical shock hazards.
Dry around the washer door opening, flexible gasket, and door glass. These areas
should always be clean to ensure a water tight seal.
Figure 1
•
When extremely soiled items have been washed, a dirty residue may remain on the
drum.Removethisbywipingthedrumwithanonabrasivehouseholdcleanser.Rinse
thoroughlywithwater.
(Lock tab is visible only after drawer
has been pulled out)
•
•
Periodically,wipedrythefoldsinthebottomoftheflexiblegaskettoremovelintand
otherdebris.
The plastic drum vanes may become stained from fabric dye. Clean these parts with
a nonabrasive household cleanser. This prevents dye transfer to future loads.
Cleaning the Dispenser Drawer Area
Detergent and fabric softener may build up in the dispenser drawer. Residue should be
removed once or twice a month.
•
Remove the drawer by first sliding the safety latch to the right, then pulling the
drawer out until it stops. (Figure 1)
Figure 2
•
Reach back into the left rear corner of the drawer cavity and press down firmly on
the lock tab (left rear portion of the drawer). Pull out the drawer. (Figure 2)
Remove the insert from the bleach and fabric softener compartments. (Figure 3)
Rinse the drawer and inserts with hot tap water to remove traces of accumulated
powders and liquids. Large amounts of fabric softener residue may indicate
improper dilution or more frequent cleaning is required.
•
•
•
•
To clean the drawer opening, use a small brush to clean the recess. Remove all
residue from the upper and lower parts of the recess. (Figure 4)
Replace the insert pressing the "X" to lock it in place. Return the dispenser drawer.
Outside
•
When washing is completed, wipe top and sides of washer with a damp cloth. Turn
water faucets off to prevent pressure build-up in the hoses.
As needed, clean the cabinet with mild soap and water. Never use harsh, gritty
or abrasive cleansers. If door or console becomes stained, clean with diluted
chlorine bleach [1/2 cup (120 ml) in 1 quart (.95 L) water]. Rinse several times with
clear water.
•
Figure 3
•
•
•
Remove glue residue from tape or labels with a mixture of warm water and mild
detergent. Or, touch residue with the sticky side of the tape or label.
When cleaning chrome parts use Windex with ammonia or any of the cleaning
items mentioned for cleaning the cabinet.
Beforemovingthewasher,placeastripofcardboardorthinfiberboardunderthe
front leveling legs to prevent floor damage.
Winterizing Instructions
If the washer is stored in an area where freezing can occur or moved in freezing
temperatures, follow these winterizing instructions to prevent damage to the washer:
1. Turn off water supply faucets.
2. Disconnect hoses from water supply and drain water from hoses.
3. Plug electrical cord into a properly grounded electrical outlet.
4. Add 1 gallon (3.8 L) nontoxic recreational vehicle (RV) antifreeze to empty wash
drum. Close door.
Figure 4
5. SelecttheDrain/Spincycle.PressSTARTandletthewasherdrainfor1minutetodrain
out all the water. Not all of the RV antifreeze will be expelled.
6. Press Pause/Cancel twice, unplug electrical power cord, dry off drum interior and
close door.
7. Removedispenserdrawer.Drainanywaterincompartmentsanddrycompartments.
Replace drawer.
8. Store washer in an upright position.
Follow
Winterizing
Instructions for
cold weather
care.
9. To remove antifreeze from washer after storage, run empty washer through a
complete cycle using detergent. Do not add wash load.
9
Avoid Service Checklist
Before calling for service, review this list. It may save both time and expense. The list includes common concerns that are not the result of defective
workmanship or materials in this washer.
OCCURRENCE
POSSIBLE CAUSE / SOLUTION
NOISE
• A certain amount of motor whine is normal during the spin cycle.
High pitch "jet engine" noise.
• Foreign objects such as coins or safety pins may be in drum or pump. Stop washer and check drum.
If noise continues after washer is restarted, objects may be in pump. Call your authorized servicer.
• Belt buckles and metal fasteners are hitting wash drum. To prevent unnecessary noise and damage
to drum, fasten fasteners and turn items inside out.
Rattling and clanking noise.
• Washer is overloaded. Do not overload washer. Stop washer and reduce load.
Squealing sound or hot rubber odor.
• Heavy wash loads may produce a thumping sound. This is usually normal. If sound continues, washer
is probably out of balance. Stop washer and redistribute wash load.
Thumping sound.
Vibrating noise.
• Washer is not resting firmly on floor. Move washer so it rests firmly on floor. Adjust leveling legs and
tighten lock nuts. See INSTALLATION INSTRUCTIONS for details.
• Shipping bolts and foam block have not been removed during installation. See INSTALLATION
INSTRUCTIONS for removing shipping bolts and foam block.
• Wash load unevenly distributed in drum. Stop washer and rearrange wash load.
OPERATING
• Electrical power cord may not be plugged in or connection may be loose. Make sure plug fits tightly
in wall outlet.
Washer does not start.
• House fuse blown, circuit breaker tripped, or a power outage has occurred. Reset circuit breaker or
replace fuse. Do not increase fuse capacity. If problem is a circuit overload, have it corrected by a
qualified electrician. If problem is a power outage, call local electric company.
• Water supply faucets are not turned on. Turn on water supply faucets.
• Motor is overheated. Washer motor will stop if it becomes overheated. It will automatically restart after
a cool down period of up to 30 minutes (if washer has not been manually turned off).
• Dispenser drawer is open. Close drawer.
• Washer door is not completely closed. Close door completely.
• Load is too small. Add 1 or 2 similar items to help balance the load.
• Dispenser drawer is open. Close drawer.
Washer won't spin.
Residue left in drum.
• Heavily soiled items. Wipe drum with a nonabrasive household cleanser, then rinse. Shake or brush
excess dirt and sand from items before washing
WATER
Water collects in folds of the
bellows at the end of the cycle.
• This is a result of the washing action and is part of the normal operation of the washer.
Water collects in bleach and fabric softener
compartments.
• This is a result of the siphoning action and is part of the normal operation of the washer. Water may
be removed by removing the dispenser drawer (see Page 9, Figures 1 and 2) and draining water into
the empty drum or sink.
Wash load too wet after spin.
• Washer is overloaded. Do not overload washer. See Washing Procedures.
• Load is too small. Add 1 or 2 similar items to help balance the load.
• Load is out of balance. Rearrange load to allow proper spinning.
• Drain hose is kinked. Straighten drain hose.
Water does not enter washer or it enters
slowly.
• Water supply is not adequate in area. Check another faucet in the house. Wait until water supply and
pressure increase.
• Water supply faucets are not completely open. Fully open hot and cold faucets.
• Water is being used elsewhere in the house. Water pressure must be at least 30 psi (260 kPa). Avoid
running water elsewhere while washer is filling.
• Water inlet hoses are kinked. Straighten hoses.
Warm or hot water is not hot enough.
• Hot water heater is set too low or is a distance from washer. Measure hot water temperature at nearby
faucet with candy or meat thermometer. Water temperature should be at least 120°F (49°C). Adjust
water heater as necessary.
• Hot water is being used elsewhere in the house. Avoid using hot water elsewhere before or during
washer use. There may not be enough hot water available for proper cleaning. If problem persists,
your hot water system may be unable to support more than 1 use at a time.
Water in washer does not drain or drains
slowly.
• Drain hose is kinked or clogged. Clean and straighten the drain hose.
• Maximum standpipe height is 8' (2.4 m).
• House drain pipes are clogged. Unclog drain pipes. Contact plumber if necessary.
• Fill hose connection is loose at faucet or washer. Check and tighten hose connections. Install rubber
sealing washers provided.
Water leaks.
• Wrong detergent. Run rinse cycle. Use a low-sudsing, high efficiency detergent.
• Too much detergent. Run rinse cycle. Use less detergent in future loads
Oversudsing.
• Hot and cold water hoses are connected to wrong supply faucets. Connect hot water hose to hot
water faucet and cold water hose to cold water faucet.
Incorrect wash and rinse temperatures.
• Drain hose standpipe is incorrect height. Standpipe must be a minimum of 23.6" (60 cm) high to prevent
siphoning. See INSTALLATION INSTRUCTIONS.
Water is entering washer but tub does not
fill.
10
Kenmore Appliance Warranty
One Year Limited Warranty
When installed, operated and maintained according to all instructions supplied with the product, if this appliance fails due to
a defect in material or workmanship within one year from the date of purchase, call 1-800-4-MY-HOME®
(1-800-469-4663)toarrangeforfreerepair.
Ifthisapplianceisusedforotherthanprivatefamilypurposes, thiswarrantyappliesforonly90daysfromthedateofpurchase.
This warranty covers only defects in material and workmanship. Sears will NOT pay for:
1. Expendable items that can wear out from normal use, including but not limited to filters, belts, light bulbs, and bags.
2. A service technician to instruct the user in correct product installation, operation or maintenance.
3. A service technician to clean or maintain this product.
4. Damagetoorfailureofthisproductifitisnotinstalled, operatedormaintainedaccordingtoallinstructionssuppliedwiththe
product.
5. Damage to or failure of this product resulting from accident, abuse, misuse or use for other than its intended purpose.
6. Damage to or failure of this product caused by the use of detergents, cleaners, chemicals or utensils other than those
recommended in all instructions supplied with the product.
7. Damage to or failure of parts or systems resulting from unauthorized modifications made to this product.
Disclaimer of implied warranties; limitation of remedies
Customer’ssoleandexclusiveremedyunderthislimitedwarrantyshallbeproductrepairasprovidedherein.Impliedwarranties,
includingwarrantiesofmerchantabilityorfitnessforaparticularpurpose, arelimitedtooneyearortheshortestperiodallowed
bylaw.Searsshallnotbeliableforincidentalorconsequentialdamages.Somestatesandprovincesdonotallowtheexclusion
or limitation of incidental or consequential damages, or limitations on the duration of implied warranties of merchantability or
fitness, so these exclusions or limitations may not apply to you.
This warranty applies only while this appliance is used in the United States and Canada.
This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.
Sears, Roebuck and Co., Dept. 817WA, Hoffman Estates, IL 60179
Sears Canada Inc., Toronto, Ontario, Canada M5B 2B8
Master Protection Agreement
IntheU.S.A
Congratulations on making a smart purchase. Your new Kenmore® appliance is designed and manufactured for years of dependable
operation. But like all products, it may require preventive maintenance or repair from time to time. That’s when having a Master
Protection Agreement can save you money and aggravation.
The Master Protection Agreement also helps extend the life of your new appliance. Here’s what’s included in the Agreement:
√
√
Parts and labor needed to help keep products operating prop-erly under normal use, not just defects. Our coverage
goes well beyond the product warranty. No deductibles, no functional failure excluded from coverage— real protection.
Expert service by a force of more than 10,000 authorized Sears service technicians, which means someone you can
trust will be working on your product.
√
√
Unlimited service calls and nationwide service, as often as you want us, whenever you want us.
“No-lemon” guarantee – replacement of your covered product if four or more product failures occur within twelve
months.
√
√
√
Product replacement if your covered product can’t be fixed.
Annual Preventive Maintenance Check at your request – no extra charge.
Fast help by phone – we call it Rapid Resolution – phone sup-port from a Sears representative on all products. Think of
us as a “talking owner’s manual.”
√
√
Power surge protection against electrical damage due to power fluctuations.
$250 Food Loss Protection annually for any food spoilage that is the result of mechanical failure of any covered
refrigerator or freezer.
√
√
Rental reimbursement if repair of your covered product takes longer than promised.
10% discount off the regular price of any non-covered repair service and related installed parts.
Once you purchase the Agreement, a simple phone call is all that it takes for you to schedule service. You can call anytime day or
night, or schedule a service appointment online.
The Master Protection Agreement is a risk free purchase. If you can-cel for any reason during the product warranty period, we will
provide a full refund. Or, a prorated refund anytime after the product warranty period expires. Purchase your Master Protection
Agreement today!
Sears Installation Service
For Sears guaranteed professional installation of home
appliances and items like garage door openers and water
heaters, in the U.S.A. call 1-800-4-MY-HOME®
Some limitations and exclusions apply.
For prices and additional information,
call 1-800-827-6655.
|