120V AC/DC Wire-in Smoke Alarm
Safety Light
Part# 21006379
Model i12080
– Ionization Sensing Technology
– Safety Light
– One button design (operates Smart Hush™ and test)
– Large mounting base
– 9V Battery Backup (included)
– Tamper resist feature
– Alarm memory
– Pre-stripped wiring harness with tinned strands
Description
Install Confidence
Easy Installation
The Kidde i12080 is an AC/DC powered, ionization
smoke alarm that operates on a 120V power source
with 9V battery backup.
• Front battery pull tab allows battery activation
without removing alarm from mounting bracket.
• Large mounting base makes mounting easier, protects
surface paint from dirt and covers imperfections.
• Pre-stripped wiring harness with easy off cap does
not require stripper tool. Tinned strands increase
conductivity and wire nut grip
This alarm uses ionization sensing technology. Ionization
sensing alarms may detect invisible fire particles
(associated with flaming fires) sooner than photoelectric
alarms. Photoelectric sensing alarms may detect visible
particles (associated with smoldering fires) sooner than
ionization alarms.
Fewer Callbacks
• One button design for easy operation and less
confusion. Operates Smart Hush™ and alarm test.
• Battery run down protection will shut down alarm
memory when AC power is not present, reducing
low battery chirp.
Kidde strongly recommends that both ionization
and photoelectric smoke alarms be installed to help
insure maximum detection of the various types of
fire that can occur within the home.
The i12080 includes a quick connect wiring harness for
easy installation. The safety light illuminates to guide you
to safety. This smoke alarm is available in a 6-piece cut
case with tray for easy display. This unit is a UL Listed
product with a 10-year limited warranty.
• Dust cover protects sensor from contaminates
during construction reducing nuisance alarms
User-Friendly Features
• Safety Light illuminates the path to safety.
• Tamper resist locking feature deters alarm theft
• Alarm memory flashes red LED indicating which unit
was the initiating alarm in interconnected system.
• Battery backup provides protection in case of
power failure.
SIGNALING
• Interconnectable with up to 24 devices (of which
18 can be initiating) including smoke, CO and heat
alarms. See user’s guide for complete instructions.
U
LISTED
L
|