4'' Two-Way Bookshelf Loudspeaker
RB-10
I
The Reference Series RB-10 bookshelf
loudspeaker is part of Klipsch’s new entry-
level Reference 10 family that offers the same
advanced technology and world-class materials
as the Reference III models but from smaller
enclosures and at lower price points.
Magnetically shielded to prevent video interference
Back-panel keyhole and threaded insert for popular wall and
ceiling brackets
I
I
Tractrix Horn titanium dome compression driver tweeter for clean,
detailed highs
I
Cerametallic cone woofer
I
High sensitivity and power handling
As the smallest bookshelf loudspeaker Klipsch
has ever made, the RB-10 employs a 4-inch
woofer and
compression driver loaded with a 4-inch
square Tractrix Horn for maximum clarity
a
1-inch titanium-dome
S P E C I F I C A T I O N S
®
BANDWIDTH
90Hz-20kHz 3dB
and efficiency.
SENSITIVITY
90dB @ 2.83 volts/1 meter
8 ohms compatible
2800Hz
The woofer on the RB-10 still features
Klipsch’s distinctive, copper-colored
Cerametallic™ material. Made with an
anodized aluminum, this cone is strong with
low mass. The anodizing process converts its
inner and out surface to ceramic. The
outcome is a rigid cone with superb damping
characteristics that will not flex or resonate at
frequencies within the woofer’s operating
range.
NOMINAL IMPEDANCE
CROSSOVER FREQUENCY
POWER HANDLING
50 watts (200 watts peak)
ENCLOSURE TYPE
DRIVE COMPONENTS
Bass-reflex via rear-firing port
Two way system using one 1'' (2.5cm)
magnetically shielded, titanium dome
compression driver with an integral
4'' (10.2cm) square 90˚x 60˚ Tractrix Horn
and one 4'' (10.2cm) magnetically shielded,
Cerametallic cone woofer
As in all Reference Series speakers, the RB-10
crossover network is constructed using
extremely high-quality components including
top-of-the-line internal wiring, polyester film-
type capacitors and an air-core inductor to
ensure signal purity and proper driver
integration.
WEIGHT
HEIGHT
WIDTH
DEPTH
6 lbs. (2.7kg)
8.7" (22.1cm)
5.6" (14.1cm)
7.8" (19.8cm)
FINISH
Black Ash woodgrain vinyl
Keyhole mount with threaded insert
The RB-10 has both a back-panel keyhole for
on-wall mounting and a threaded insert for
attachment to popular adjustable wall and
ceiling brackets. Available in a black vinyl finish,
the RB-10 features a low-diffraction sculpted
baffle and magnetically attached grille for an
elegant fit and finish.
MOUNTING
*All dimensions include grille and binding posts
1-800-KLIPSCH
All specifications are subject to change without notice. ©2004
|