6
CITRUS PRESS
KH 25
Citrus Press
Operating instructions
KOMPERNASS GMBH · BURGSTRASSE 21 · D-44867 BOCHUM
ID-Nr.: KH25-08/09-V3
CONTENT
PAGE
Intended use
2
2
2
2
3
3
4
4
4
5
5
5
6
6
Technical Data
Items supplied
Important safety instructions
Appliance description
Set-up and assembly of the appliance
Juice extraction
Emptying
Disassembly
Cleaning and Care
Storage
Disposal
Warranty & Service
Importer
Read these operating instructions carefully before using the appliance for the first time and preserve this
maual for later reference. Pass this manual on to whoever might acquire the appliance at a future date.
- 1 -
CITRUS PRESS KH 25
Important safety instructions
Intended use
To avoid potentially fatal electric
shocks:
The appliance is intended for the extraction of juices
from citrus fruits such as oranges and lemons. Only
foodstuffs may be processed with the appliance. All
other usages or modifications are regarded as con-
trary to the operating instructions and contain a
great risk of accidents. The manufacturer accepts no
liability for damage(s) resulting from usage that is
contrary to these instructions. Not for commercial
use.
• The rating of the local power supply must tally
completely with the details given on the rating
plate of the appliance.
• Arrange for defective power plugs and/or ca-
bles to be replaced at once by qualified technici-
ans or our Customer Service Department.
• Arrange for damaged or malfunctioning
appliances to be inspected and/or repaired
by a qualified specialist or the Customer
Service Department as soon as possible.
• Do not expose the appliance to rain and never
use it in a humid or wet environment. Ensure that
the power cable never becomes moist or wet
during operation.
Technical Data
Mains voltage:
Rated output:
220-240 V 50 Hz
~
25 W
Protection class: II /
To avoid the risks of fire and burn
injuries:
• This appliance is not intended for use by persons
(including children) with reduced physical, sen-
sorial or mental cabilities, or lack of experience
and knowledge, unless they have been given
supervision or instruction concerning use of the
appliance by a person responsible for their
safety.
• Children should be supervised to ensure that
they do not play with the appliance.
• Provide for a safe and slip-free positioning of the
appliance.
Items supplied
Citrus Press
Large squeezing cone
Small squeezing cone
Fruit pulp sieve (2 parts)
Operating instructions
• Ensure that the power plug is easily accessible in
the event of danger, and that there is no danger
of anyone tripping over the power cable.
- 2 -
Using the appliance safely:
• In the event of danger, immediately remove the
power plug from the wall socket.
• Never use the appliance for purposes other than
those for which it was designed.
Note:
Rinse all removable components thoroughly before
the first usage of the appliance (see chapter
"Cleaning and care").
• Remove the power plug from the wall socket
when the appliance is not in use, when you re-
move parts and before cleaning the appliance.
• Do not use the appliance outdoors.
3. Place the juice collector
on the drive axle
and turn it clockwise
u
i
of the appliance plinth
as far as it will go.
a
4. Place both parts of the fruit pulp sieve
/
r y
into each other so that the fruit pulp regulator
protrudes through the recess. Both parts must
audibly engage.
t
Appliance description
5. Place the assembled fruit pulp sieve
/
on
r y
Lid
the juice collector . The fruit pulp regulator
must lie on the grip and catch in the rabbet on
the grip.
q
w
e
r
t
y
u
i
o
a
s
u
t
Large squeezing cone
Small squeezing cone
Upper fruit pulp sieve
Fruit pulp regulator
Lower fruit pulp sieve
Juice collector
Drive axle
Power cable with power plug
Appliance plinth
6. Press the small squeezing cone
on the drive
e
axle
so that it engages.
i
Note:
If you want to press oranges or other larger fruits,
place the large squeezing cone over the small
w
squeezing cone . Ensure that the lobes of the
e
Power cable storage
small squeezing cone engage in the recesses of
e
the large squeezing cone
.
w
Set-up and assembly of the
appliance
7. Insert the power plug into a wall power socket.
The appliance is now ready for use.
Important:
Ensure that the power plug is not in the power
socket before assembling the appliance. Otherwise
there is a risk that the appliance could start
unintentionally.
1. Unwind the power cable
completely from the
o
cable storage
and secure it in the lateral
s
recess on the appliance plinth
.
a
2. Place the appliance plinth
slipfree surface.
on a level and
a
- 3 -
Juice extraction
Emptying
Note:
Important:
Remove the power plug from the wall socket when
you empty the fruit pulp sieve or the juice collector
When pressing out juice, do not exceed the 600 ml
volume marking on the scale of the juice collector
.
. Otherwise there is a risk that the appliance
u
u
could start unintentionally.
• Turn the juice collector
1. Adjust the fruit pulp regulator , by sliding it, so
t
that the slits in the fruit pulp sieve
/
lie
anti-clock-wise until the
r y
u
exactly above each other if you wish to have fru-
perceptible resistance desists. You can now lift it
it juice with fruit pulp. Adjust the fruit pulp regula-
from the drive axle
and pour the juice out.
i
tor
, by sliding it, so that the slits in the fruit
t
pulp sieve
/
are not lying above each other
r y
if you do not wish to have fruit juice with fruit
pulp.
Disassembly
2. Cut the fruits in half (orange, lemon etc.)
3. Press the halved fruit lightly onto the squeezing
If you wish to disassemble the Citrus Press, e.g. for
the cleaning of it, proceed as follows:
cone
/
. The appliance switches itself on
1. Remove the power plug from the wall socket
.
o
w e
automatically as soon as the squeezing cone
is pressed down.
2. Remove the squeezing cone
3. Remove the fruit pulp sieve
/
w e
r y
.
/
/
.
w e
4. Apply pressure at various parts of the fruit rind
with your fingers. Thereby the juice will be even-
ly squeezed out of the fruit.
Press the hook on the underside of the upper fruit
pulp sieve inwards. At the same time exert
r
light pressure on the fruit pulp sieve . The com-
t
5. When no more juice flows from the fruit, stop
ponents allow themselves to be pressed apart.
applying pressure to the squeezing cone
The appliance stops.
/
w e
.
4. Turn the juice catchment container
anti-
u
clockwise until the perceptible resistance
6. Press the squeezing cone
/
down repeated-
diminishes. You can now lift it from the drive
w e
ly to loosen it, until it turns in the opposite
direction.
axle
.
i
7. When no more juice flows from the fruit, stop
applying pressure to the squeezing cone
/
.
w e
The appliance stops. Remove the fruit skin from
the squeezing cone
/
.
w e
8. Continue similarly with further fruit-halves until
you have squeezed out the desired volume of
fruit juice. The current volume squeezed can be
read off from the scale on the side of the juice
collector
.
u
- 4 -
Cleaning and Care
Storage
If you do not intend to use the appliance for an
Important:
extended period, wrap the power cable
around
o
Always remove the power plug from the wall socket
before cleaning the appliance. There is a risk of
receiving an electric shock!
the power cable storage , directing the end of the
s
cable through the lateral recess on the appliance
plinth . Assemble the appliance completely and
a
close the lid. Store the appliance at a clean and dry
Important:
To avoid receiving an electrical shock, NEVER
location.
submerse the appliance plinth
fluids.
in water or other
a
Disposal
• Disassemble the Citrus Press as described in the
chapter "Disassembly".
Do not dispose of the appliance in your
normal domestic waste. This product is
subject to the European guideline
2002/96/EC.
• Clean the appliance plinth
moistened cloth.
only with a slightly
a
• Clean all other removable parts in a warm mild-
detergent solution and dry them carefully.
Dispose of the appliance through an approved dis-
posal centre or at your community waste facility.
Observe the currently applicable regulations.
In case of doubt, please contact your waste disposal
centre.
• To clean the fruit pulp sieve
/
, take it apart
r y
and clean it with a dishwashing brush under
running water.
Note:
Do not use aggressive detergents to clean the
appliance. These substances can attack the upper
surfaces.
Dispose of all packaging materials in an
environmentally responsible manner.
The appliance and its components may not be
cleaned in a dishwasher or in boiling water.
- 5 -
Warranty & Service
Importer
The warranty for this appliance is for 3 years from
the date of purchase. The appliance has been ma-
nufactured with care and meticulously examined be-
fore delivery. Please retain your receipt as proof of
purchase. In the event of a warranty claim, please
make contact by telephone with our Service Depart-
ment. Only in this way can a post-free despatch for
your goods be assured.
KOMPERNASS GMBH
BURGSTRASSE 21
44867 BOCHUM, GERMANY
The warranty covers only claims for material and
maufacturing defects, but not for transport damage,
for wearing parts or for damage to fragile compo-
nents, e.g. buttons or batteries. This product is for
private use only and is not intended for commercial
use. The warranty is void in the case of abusive and
improper handling, use of force and internal tampe-
ring not carried out by our authorized service
branch. Your statutory rights are not restricted in
any way by this warranty.
The warranty period will not be extended by repairs
made unter warranty. This applies also to replaced
and repaired parts. Any damage and defects extant
on purchase must be reported immediately after un-
packing the appliance, at the latest, two days after
the purchase date. Repairs made after the expira-
tion of the warranty period are subject to payment.
DES UK LTD
Tel.: 0871 5000 700 (£ 0,10 / minute)
e-mail: [email protected]
Kompernass Service Ireland
Tel: 1850 930 412 (0,082 EUR/Min.)
Standard call rates apply. Mobile operators may vary.
e-mail: [email protected]
- 6 -
|