HT762PZ-A0_DCANLL_ENG_1791
DVD RECEIVER
OWNER’S MANUAL
MODEL: HT762PZ
HT762PZ
SH72PZ-F
SH72PZ-S
SH72PZ-C
SH72PZ-W
R
Before connecting, operating or adjusting this product,
please read this instruction booklet carefully and
completely.
IMPORTANT SAFETY INSTRUCTIONS
CAUTION: PLEASE READ AND OBSERVE ALL WARNINGS AND INSTRUCTIONS IN THIS OWNER’S
MANUAL. AND THOSE MARKED ON THE PRODUCT. RETAIN THIS MANUAL FOR FUTURE
REFERENCE.
This product has been designed and manufactured to assure personal safety. Improper use can result in electric
shock or fire hazard. The safeguards incorporated in this product will protect you if you observe the following
procedures for installation, use, and servicing.
This product does not contain any parts that can be repaired by the user.
DO NOT REMOVE THE CABINET COVER, OR YOU MAY BE EXPOSED TO DANGEROUS VOLTAGE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL ONLY.
1. Read these instructions. - All these safety and
operating instructions should be read before the
product is operated.
10. Protect the power cord from being walked on or
pinched particularly at plugs, convenience
receptacles, and the point where they exit from
the apparatus.
2. Keep these instructions. - The safety, operating
and use instructions should be retained for future
reference.
11. Only use attachments/accessories specified by
the manufacturer.
3. Heed all warnings. - All warnings on the product
and in the operating instructions should be adhered
to.
12. Use only with the cart, stand, tripod, bracket, or
table specified by the manufacturer, or sold
with the apparatus. When a cart is used, use
caution when moving the cart/apparatus
combination to avoid injury from tip-over.
4. Follow all instructions. - All operating and use
instructions should be followed.
5. Do not use this apparatus near water. – For
example: near a bath tub, wash bowl, kitchen sink,
laundry tub, in a wet basement; or near a swimming
pool; and other areas located near water.
6. Clean only with dry cloth. – Unplug this product
from the wall outlet before cleaning. Do not use
liquid cleaners.
7. Do not block any ventilation openings. Install in
accordance with the manufacturer's instructions. -
Slots and openings in the cabinet are provided for
ventilation and to ensure reliable operation of the
product and to protect it from over-heating. The
openings should never be blocked by placing the
product on a bed, sofa, rug or other similar surface.
This product should not be placed in a built-in
installation such as a bookcase or rack unless
proper ventilation is provided or the manufacturer’s
instructions have been adhered to.
13. Unplug this apparatus during lightning storms
or when unused for long periods of time.
14. Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has
been damaged in any way, such as power-supply
cord or plug is damaged, liquid has been spilled
or objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture,
does not operate normally, or has been dropped.
8. Do not install near any heat sources such as
radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce
heat.
9. Do not defeat the safety purpose of the polarized
or grounding-type plug. A polarized plug has two
blades with one wider than the other. A grounding
type plug has two blades and a third grounding
prong. The wide blade or the third prong are
provided for your safety. If the provided plug does
not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
3
Introduction
Maintenance and Service
Maintenance and Service . . . . . . . . . . . . . . . . .4
Before use . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Front Panel/Rear Panel . . . . . . . . . . . . . . . . . . .6
Remote Control . . . . . . . . . . . . . . . . . . . . . . . . .7
Refer to the information in this chapter before
contacting a service technician.
Handling the unit
Installation and Setup
TV Connection . . . . . . . . . . . . . . . . . . . . . . . . . .8
Optional Equipment Connection . . . . . . . . . . . .9
USB connection . . . . . . . . . . . . . . . . . . . . . . .9
AUX IN connection . . . . . . . . . . . . . . . . . . . . .9
OPTICAL IN connection . . . . . . . . . . . . . . . . .9
AUDIO IN connection . . . . . . . . . . . . . . . . . . .9
Antenna Connection . . . . . . . . . . . . . . . . . . . . .9
Assembling the speaker stand to the speaker 10
Speaker System Connection . . . . . . . . . . . . . .10
HDMI Connection . . . . . . . . . . . . . . . . . . . . . .11
Displaying Disc Information on-screen . . . . . .12
Initial Settings . . . . . . . . . . . . . . . . . . . . . . . . .12
General Operation . . . . . . . . . . . . . . . . . . . .12-14
LANGUAGE . . . . . . . . . . . . . . . . . . . . . . . . .12
DISPLAY . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
AUDIO . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
5.1 Speaker Setup . . . . . . . . . . . . . . . . . . . . .13
LOCK (Parental Control) . . . . . . . . . . . . . . . .14
OTHERS . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
When shipping the unit
Please save the original shipping carton and packing
materials. If you need to ship the unit, for maximum
protection, re-pack the unit as it was originally packed
at the factory.
Keeping the exterior surfaces clean
ꢀ
Do not use volatile liquids such as insecticide spray
near the unit.
ꢀ
Do not leave rubber or plastic products in contact
with the unit for a long period of time. since they
leave marks on the surface.
Cleaning the unit
To clean the player, use a soft, dry cloth. If the
surfaces are extremely dirty, use a soft cloth lightly
moistened with a mild detergent solution.
Do not use strong solvents such as alcohol, benzine,
or thinner, as these might damage the surface of the
unit.
Operation
General features . . . . . . . . . . . . . . . . . . . . . . .15
Additional features . . . . . . . . . . . . . . . . . . . . .16
Playing an Audio CD or MP3/WMA file . . . . . .17
Programmed Playback . . . . . . . . . . . . . . . . . .17
Viewing a JPEG file . . . . . . . . . . . . . . . . . . . .18
Playing a DivX Movie file . . . . . . . . . . . . . . . .19
DVD Audio Discs . . . . . . . . . . . . . . . . . . . . . . .20
Presetting the Radio Stations . . . . . . . . . . . . .21
Listening to the Radio . . . . . . . . . . . . . . . . . . .21
Sleep Timer Setting . . . . . . . . . . . . . . . . . . . . .22
Dimmer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22
Mute . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22
Selecting input source . . . . . . . . . . . . . . . . . . .22
XTS/XTS pro . . . . . . . . . . . . . . . . . . . . . . . . . . .22
VIRTUAL sound . . . . . . . . . . . . . . . . . . . . . . . .22
Sound Mode . . . . . . . . . . . . . . . . . . . . . . . . . . .22
Controlling your TV with the Suppllied
Maintaining the Unit
The DVD/CD Receiver is a high-tech, precision
device. If the optical pick-up lens and disc drive parts
are dirty or worn, the picture quality could be
diminished.
Depending on the operating environment, regular
inspection and maintenance are recommended after
every 1,000 hours of use.
For details, please contact your nearest authorized
service center.
Remote Control . . . . . . . . . . . . . . . . . . . . . . . .23
Controlling other TVs with the Supplied
Remote Control . . . . . . . . . . . . . . . . . . . . . .23-24
What is SIMPLINK?
Some functions of this unit are controlled by TV’s
remote control when this unit and LG TV with
SIMPLINK are connected through HDMI
connection.
Reference
Language Codes . . . . . . . . . . . . . . . . . . . . . . .25
Area Codes . . . . . . . . . . . . . . . . . . . . . . . . . . .25
Troubleshooting . . . . . . . . . . . . . . . . . . . . .26-27
•
Controllable functions by LG TV’s remote control;
Play, Pause, Scan, Skip, Stop, Power Off, etc.
•
Refer to the TV owner’s manual for the details of
SIMPLINK function.
Specifications . . . . . . . . . . . . . . . . . . . . . . . . .28
•
•
LG TV with SIMPLINK function has the logo as
shown above.
Use a higher version cable than 1.2A HDMI
cable.
4
Introduction
Types of Playable Discs
Before use
DVD
To ensure proper use of this product, please read this
owner’s manual carefully and retain it for future
reference.
(8 cm / 12 cm disc)
Video CD (VCD)
(8 cm / 12 cm disc)
This manual provides information on the operation
and maintenance of your DVD/CD Receiver. Should
the unit require service, contact an authorized service
location.
Audio CD
(8 cm / 12 cm disc)
In addition, this unit can play a DVD R, DVD RW,
SVCD and CD-R or CD-RW that contains audio titles,
MP3, WMA, JPEG or DivX files.
About the
Symbol Display
“
” may appear on your TV display during
Notes:
operation and indicates that the function explained in
this owner’s manual is not available on that specific
DVD video disc.
ꢀ
Depending on the conditions of the recording
equipment or the CD-R/RW (or DVD-RW,
DVD+RW) disc itself, some CD-R/RW (or DVD-RW,
DVD+RW) discs may not be played on the unit.
Do not attach any seal or label to either side (the
labeled side or the recorded side) of a disc.
Do not use irregularly shaped CDs (e.g., heart-
shaped or octagonal). It may result in malfunctions.
ꢀ
ꢀ
Symbol Used in this Manual
Note:
Indicates special notes and operating features.
Tip:
Regional Code
Indicates tips and hints for making the task easier.
This unit has a regional code printed on the rear of the
unit. This unit can play only DVD discs labelled as the
same as the rear of the unit or “ALL”.
A section whose title has one of the following symbols
is applicable only to the disc represented by the
symbol.
Notes on Regional Codes
ꢀ
Most DVD discs have a globe with one or more
numbers in it clearly visible on the cover. This
number must match your DVD player’s regional
code or the disc cannot play.
DVD
DVD
VCD
Video CDs
ACD
Audio CDs
ꢀ
If you try to play a DVD with a different regional
code from your player, the message “Check
Regional Code” appears on the TV screen.
MP3
MP3 files
WMA
WMA files
JPEG
DivX
JPEG files
DivX files
Remote Control Operation Range
Point the remote control at the remote sensor and press the
buttons.
Manufactured under license from Dolby Laboratories.
“Dolby”, “Pro Logic”, and the double-D symbol are
trademarks of Dolby Laboratories. Confidential Unpublished
works. Copyright 1992-1997 Dolby Laboratories. All rights
reserved.
ꢀ Distance: About 23 ft (7 m) from the front of the remote
sensor
ꢀ Angle: About 30° in each direction in front of the remote
sensor
Remote control battery installation
Manufactured under license from Digital Theater Systems,
Inc. U.S. Pat. No’s. 5,451,942; 5,956,674; 5,974,380;
5,978,762; 6,226,616; 6,487,535 and other U.S. and world-
wide patents issued and pending. "DTS" and "DTS Digital
Surround” are registered trademarks of Digital Theater
Systems, Inc. Copyright 1996, 2003 Digital Theater
Systems, Inc. All Rights Reserved.
Remove the battery cover on the rear of
the remote control, and insert two R06
(size AA) batteries with
aligned correctly.
and
5
Front Panel/Rear Panel
POWER
OPEN/CLOSE button
DISPLAY Window
DISC Tray
VOLUME controller
TUNING(-/+)/SKIP/
SEARCH(./>)
AUDIO IN connector
STOP (x)
PAUSE ( )/
X
MONO/STEREO (ST.)
USB port
Connect to a USB port of a memory
device (USB memory etc.)
FUNC.(-)/PLAY(B)
Press and hold down this button
about 3 seconds, then press
repeatedly to select other function.
Remote sensor
Power Cord
SPEAKER connectors
FM Antenna connector
AUX AUDIO Input
(L/R) connector
Cooling fan
INPUT
AUX
MONITOR
L
-
-
R
HDMI OUT
Y
PB
PR
COMPONENT VIDEO (PROGRESSIVE SCAN)
OUT PUT
OPTICAL IN connector
AM Loop Antenna connectors
MONITOR OUT connector
COMPONENT VIDEO OUT terminals
Connect to a TV with Y PB PR inputs.
HDMI OUT
HDMI output providing a high quality interface for digital audio and video.
ꢀ Do not touch the inner pins of the jacks on the rear panel. Electrostatic discharge may cause
permanent damage to the unit.
ꢀ Wireless transmitter receiver kit not supplied. We urge you to purchase such a kit to avoid
cumbersome wires running front to back on the floor.
6
Remote Control
OPEN/CLOSE (Z)
POWER
TUNER
Opens and closes the disc tray.
DVD
Selects the output source (CD/DVD).
Selects the System’s tuner (FM, AM
bands).
TUNER
AUX
OPEN/CLOSE
POWER
DIMMER
PROG./MEMO.
DVD
AUX
Accesses or removes Program menu.
Enter a radio station’s frequency into
the tuner.
Selects input source.
USB
PROG./MEMO.
USB
AUDIO
SOUND
S-TITLE
CLEAR
Plays the multimedia files.
S-TITLE
Selects a subtitle language (DVD).
DIMMER
Changes brightness of the display
window on the front panel during in
power-on status.
REPEAT
REPEAT A-B
MARKER
SEARCH
CLEAR
Removes a track number on the
program menu or a mark on the
MARKER SEARCH menu.
SCAN
TITLE
SKIP
+
SCAN +
PAUSE/STEP
AUDIO
Selects an audio language (DVD) or an
audio channel (CD).
STOP
PLAY
MARKER
Marks a point during playback.
ZOOM
DISPLAY
RETURN
SOUND
Selects the sound mode.
SEARCH
Displays MARKER SEARCH menu.
SETUP
MENU
REPEAT
Repeats chapter, track, title, all.
SCAN/SLOW(bb/BB)
Searches backward or forward.
Reverse/Forward slow playback.
REPEAT A-B
ENTER
Repeats sequence.
SKIP (./>)
Moves to the previous or next chapter
or track.
MENU
Accesses the menu on a DVD disc.
ZOOM
Enlargres video image.
TITLE
Displays the disc’s Title menu, if
available.
SLEEP
MUTE
VOL
SETUP
STOP (x), PLAY (B)
PAUSE/STEP (X)
VSM
Accesses or removes setup menu.
DISPLAY
Accesses On-Screen display.
RETURN
Removes the menu.
XTS pro
Supplies more natural and realistic
sound.
b/B/v/V (left/right/up/down)
Selects an option in the menu.
Supplies great sound effect.
RESOL .
HDMI
SLEEP
Sets the System to turn off
automatically at a specified time.
ENTER
Acknowledges the menu selection.
PRESET (-/+)
Selects programme of Radio.
MUTE
Turns the sound on and off
temporarily.
TUN. (-/+)
Tunes in the desired radio station.
POWER
INPUT
CHANNEL
VOLUME
VOLUME (-/+)
Adjusts speaker volume.
0-9 numerical buttons
Selects a service, program number
directly or selects numbered options in
a menu.
RESOL.
Changes the resolution depending on
your TV.
HDMI
TV Control Buttons
Switches the HDMI mode to HDMI
(active) and OFF (inactive).
- POWER: Switches TV ON and OFF.
- CHANNEL v/V: Selects TV’s
channel.
- VOLUME +/–: Adjusts TV’s volume.
- INPUT: Selects the TV’s source.
7
Installation and Setup
TV Connection
Make one of the following connections, depending on
the capabilities of your existing equipment.
Video connection
Connect the MONITOR OUT jack from the DVD/CD
Receiver to the VIDEO IN jack on the TV using the
video cable (V).
Tips:
ꢀ
ꢀ
Depending on your TV and other equipment you
wish to connect, there are various ways you could
connect the DVD/CD Receiver. Use one of the
connections described below.
Component Video connection
Connect the COMPONENT VIDEO OUT jacks from
the DVD/CD Receiver to the corresponding jacks on
the TV using a Y PB PR cable (C).
Please refer to the manuals of your TV, VCR,
Stereo System or other devices as necessary to
make the best connections.
ꢀ
ꢀ
If your television is a high-definition or “digital
ready” television, you may take advantage of the
DVD/CD Receiver’s progressive scan output for the
highest video resolution.
If your TV does not accept your resolution setting,
abnormal picture appears on the screen. Please
read owner’s manual for TV then set the resolution
that your TV can accept.
Caution:
ꢀ
Make sure the DVD/CD Receiver is connected
directly to the TV. Select the correct AV input on
your TV.
ꢀ
Do not connect your DVD/CD Receiver to the TV
via your VCR. The DVD image could be distorted
by the copy protection system.
Note:
Rear of DVD/CD Receiver
The HDMI mode must be set to OFF for VIDEO OUT
and Component video connections.
INPUT
AUX
MONITOR
L
-
-
R
HDMI OUT
Y
PB
PR
COMPONENT VIDEO (PROGRESSIVE SCAN)
OUT PUT
V
C
VI
INPUT
OMPONT VIDE
PRGRESSIVE SCAN IPUT
Y
L
Rear of TV
8
Optional Equipment Connection
OPTICAL IN connection (O)
Connect an optical output of DVD Player (or Digital
Device etc) to the OPTICAL IN connector.
Auxiliary device
DVD Player
(or Digital
Device, etc)
OUT
IN
VIDEO
AUDIO (L)
AUDIO IN connection (D)
AUDIO (R)
U
OPTICAL
OUT
Connect a output of portable device (MP3 or PMP etc)
to the AUDIO input connector.
To AUDIO OUT (L/R)
USB Memory, MP3 Player (or
Memory Card Reader, etc.)
A
To AV IN AUDIO (L/R)
O
INPUT
AUX
MONITOR
L
-
-
R
HDMI OUT
Y
PB
PR
COMPONENT VIDEO (PROGRESSIVE SCAN)
OUT PUT
To AUDIO IN
Rear of DVD/CD Receiver
USB connection (U)
D
Connect the USB port of USB Memory (or MP3
player, etc.) to the USB port on the front of the unit.
To AUDIO OUT
Portable device
Removing the USB Device from the unit
1. Choose a different function mode or press STOP
(x) twice in a row.
Antenna Connection
Connect the supplied FM/AM antenna for listening to
the radio.
2. Remove the USB device from the unit.
Notes:
ꢀ
ꢀ
Don’t extract the USB device while operating.
Music files (MP3/WMA), image files (JPEG) and
video files can be played.
ꢀ
Connect the AM Loop antenna to the AM antenna
connector.
ꢀ
Connect the FM Wire antenna to the FM antenna
connector.
ꢀ
ꢀ
This unit cannot use a USB HUB.
Recommended Memory Cards.
Compact Flash Card (CFC), Micro Drive (MD), Smart
Media Card (SMC), Memory Stick (MS), Secure Digital
Card (SD), Multimedia Card (MMC), Memory Stick Pro
(MS-Pro)
Notes:
ꢀ
To prevent noise pickup, keep the AM Loop antenna away
from the DVD/CD Receiver and other components.
Be sure to fully extend the FM wire antenna.
After connecting the FM Wire antenna, keep it as
horizontal as possible.
ꢀ
ꢀ
- Compatible with: FAT16, FAT32
- Only use the memory cards recommended.
Devices which require additional program
installation when you have connected the unit to a
computer are not supported.
In case of a USB HDD, make sure to connect an
auxiliary power cord to the USB HDD for proper
operation. Up to four primary partitions of a drive are
supported. If there is an extension partition, it will not
be supported.
ꢀ
ꢀ
AM Loop Antenna
(supplied)
FM Wire Antenna
(supplied)
ꢀ
ꢀ
If the drive of USB device is two or more, a drive
folder is displayed on the screen. If you want to
move to the initial menu after you select a folder,
press RETURN.
Digital cameras and mobile phones are not
supported.
INPUT
AUX
MONITOR
L
-
-
R
HDMI OUT
Y
PB
PR
COMPONENT VIDEO (PROGRESSIVE SCAN)
OUT PUT
AUX IN connection (A)
Connect a Output of auxiliary device to the AUX
AUDIO Input (L/R) Connector.
9
Assembling the speaker stand
to the speaker
Speaker System Connection
Connect the speakers using the supplied speaker
wires.
Before connecting the speakers, assemble the
speaker stand to the speaker as illustrated.
To obtain the best possible surround sound, adjust the
speaker parameters (volume, distance, etc.).
1. Fix the post to the
base by rotating the
post. And Draw the
speaker cord through
the hole on the base.
1
Hole
Post
Front speaker
(Left)
Front speaker
(Right)
Base
2
2. Draw the speaker
cord through the hole
on the speaker.
Center speaker
Rear speaker
(Left surround)
Rear speaker
(Right surround)
3. Fix the speaker to the
stand by rotating the
speaker. Connect the
speaker cord to the
appropriate terminals
on the speaker.
3
Subwoofer
Notes:
ꢀ
Be sure to match the speaker wire to the
appropriate terminal on the components: + to + and
– to –. If the cables are reversed, the sound will be
distorted and will lack bass.
ꢀ
If you use front speakers with low maximum input
rating, adjust the volume carefully to avoid
excessive output on the speakers.
Notes:
ꢀ
Do not catch the speaker cord between the
speaker and the post.
ꢀ
Do not drop the speaker when mounting.
10
Rear of DVD/CD Receiver
HDMI Connection
About HDMI
INPUT
AUX
MONITOR
L
-
-
R
HDMI (High Definition Multimedia Interface) supports
both video and audio on a single digital connection for an
easy all- digital output to an HDMI or DVI-equipped TV.
HDMI OUT
Y
PB
PR
COMPONENT VIDEO (PROGRESSIVE SCAN)
Connection to an HDMI TV requires an HDMI cable
while connection to a DVI-equipped TV requires a DVI
adapter besides a HDMI cable.
H
(Not supplied)
HDMI has the capability to support standard,
enhanced, or high-definition video plus standard to
multi-channel surround-sound audio, HDMI features
include uncompressed digital video, a bandwidth of up
to 5 gigabytes per second, one connector (instead of
several cables and connector), and communication
between the AV source and AV devices such as DTVs.
HDMI
HDMI compatible TV
Resolution setting
You can change the resolution for the COMPONENT
VIDEO OUT by pressing RESOL. on the Remote
Control. Available resolution settings are as shown
below.
HDMI, the HDMI logo and High-Definition Multimedia
Interface are trademarks or registered trademarks of
HDMI licensing LLC.
OUTPUT
Available Resolution
If you have a HDMI TV or monitor, you can connect
it to this DVD/CD Receiver using a HDMI cable.
CONNECTION
1920 x 1080p
1. Connect the HDMI OUT jack on the DVD/CD
Receiver to the HDMI jack on a HDMI compatible
TV or monitor (H).
HDMI
VIDEO OUT
1920 x 1080i
1280 x 720p
720 x 480p
1920 x 1080i
1280 x 720p
720 x 480p
720 x 480i
2. Set the TV’s source to HDMI (refer to owner’s
manual for TV).
COMPONENT
VIDEO OUT
3. In the stop mode, select HDMI mode by pressing
HDMI. Press RESOL. repeatedly to select the
resolution you wish to change.
MONITOR OUT
720 x 480i
Notes:
Notes:
ꢀ
The arrow on the cable connector body should face
up for correct alignment with the connector on the
DVD/CD Receiver.
ꢀ
If the picture does not appear on the screen with
the analog video connections, change the
resolution to 480i.
ꢀ
ꢀ
If HDMI cable is not connected, the HDMI button
does not operate.
If there is noise or there are lines
on the screen, please check
the HDMI cable.
ꢀ
For 720p and 1080i resolution on the component
video out, only non-copy protected discs can be
played back. If the disc is copy protected, it will be
displayed at the 480p resolution.
ꢀ
ꢀ
ꢀ
ꢀ
1080i, 1080p, 720p, and 480p does not work with
the analog video connections (MONITOR OUT).
ꢀ
ꢀ
Not all HDCP-compatible
DVI devices will work with
this DVD/CD Receiver.
If TV does not support HDCP, snow noise appears
on the screen, or picture may be vibrated.
The component (Y/PB/PR) will output to black
picture in the RGB mode.
If you change the resolution, the display MENU
(MP3/JPEG/DivX) size is changed.
Tip :
When you use HDMI connection, you can change the
resolution (480p, 720p, 1080i, 1080p) for the HDMI
output by pressing RESOL. on the Remote Control.
If your TV does not accept your resolution setting,
abnormal picture appears on the screen.
Please read owner’s manual for TV, and then set
the resolution that your TV can accept.
Caution:
Changing the resolution when the DVD/CD Receiver
is connected with HDMI connector may result in
malfunctions. To solve the problem, turn off the
DVD/CD Receiver and then turn it on again.
11
LANGUAGE
Displaying Disc Information
On - screen
LANGUAGE
English
Original
Off
OSD
You can display various information about the disc
loaded on-screen.
Disc Audio
Disc Subtitle
Disc Menu
Original
1. Press DISPLAY to show various playback
information.
The displayed items differ depending on the disc
type or playing status.
Move
Select
2. You can select an item by pressing v / V and
OSD
change or select the setting by pressing b / B.
Select a language for the Setup menu and then on-
screen display.
ꢀ Title (Track) – Current title (or track) number/
total number of titles (or tracks).
ꢀ Chapter – Current chapter number/total number
of chapters.
ꢀ Time – Elapsed playing time.
ꢀ Audio – Selected audio language or channel.
ꢀ Subtitle – Selected subtitle.
ꢀ Angle – Selected angle/total number of angles.
ꢀ Sound – Selected sound mode.
Disc Audio / Subtitle / Menu
Select the language you prefer for the audio track
(disc audio), subtitles, and the disc menu.
Original – Refers to the original language in which
the disc was recorded.
Other – To select another language, press
numeric buttons and then ENTER to enter the
corresponding 4-digit number according to
language code list on the page 25. If you enter the
wrong language code, press CLEAR.
Note:
If any button is not pressed for a few seconds, the on-
screen display disappears.
Initial Settings
DISPLAY
By using the Setup menu, you can make various
adjustments to items such as picture and sound. You
can also set a language for the subtitles and the
Setup menu, among other things. For details on each
Setup menu item, see the pages 12 to 14.
DISPLAY
16
:
9
TV Aspect
Widescreen
Display Mode
To display and exit the Menu:
Press SETUP to display the menu. A second press of
SETUP will take you back to the initial screen.
Move
Select
To go to the next level:
Press B on the remote control.
TV Aspect
To go back to the previous level:
Press b on the remote control.
4:3 – Select when a standard 4:3 TV is connected.
16:9 – Select when a 16:9 wide TV is connected.
GENERAL OPERATION
Display Mode
1. Press SETUP. The Setup menu appears.
The display Mode setting works only when the TV
Aspect mode is set to “4:3”.
2. Use v / V to select the desired option then press
B to move to the second level. The screen shows
the current setting for the selected item, as well as
alternate setting(s).
Letterbox – Displays a wide picture with bands on
the upper and lower portions of the screen.
Panscan – Automatically displays the wide picture
on the entire screen and cuts off the portions that
do not fit.
3. Use v / V to select the second desired option and
then press B to move to the third level.
4. Use v / V to select the desired setting then press
ENTER to confirm your selection. Some items
require additional steps.
5. Press SETUP or PLAY to exit the Setup menu.
12
AUDIO
5.1 Speaker Setup
Make the following settings for the built-in 5.1 channel
surround decoder.
Each DVD disc has a variety of audio output options.
Set the receiver’s AUDIO options according to the
type of audio system you use.
1. Press ENTER, and the 5.1 Speaker Setup menu
appears.
AUDIO
AUDIO
5.1 Speaker Setup
Select
DRC
On
Vocal
On
Speaker
Size
Front L
HD AV Sync
0 ms
Small
dB
m
Volume
Distance
Test
0
0
Off
Move
Select
Select
Move
Return
Enter
2. Use b / B to select the desired speaker.
Dynamic Range Control (DRC)
3. Adjust options using v / V / b / B buttons.
With the DVD*1 format, you can hear a program’s
soundtrack in the most accurate and realistic
presentation, thanks to digital audio technology.
However, you may wish to compress the dynamic
range of the audio output (the difference between the
loudest sounds and the quietest ones). Then, you may
listen to a movie at a lower volume without losing
clarity of sound. Set DRC to On for this effect.
*1:Dolby Digital only
4. Press ENTER to confirm your selection. Returns to
the previous menu.
Speaker selection
Select a speaker that you want to adjust. [Front
speaker (Front L), Front speaker (Front R), Center
Speaker (Center), Subwoofer (SubWoofer), Rear
speaker (Rear L), Rear speaker (Rear R)]
Note:
Vocal
Certain speaker settings are prohibited by the Dolby
Digital licensing agreement.
Set Vocal to On only when a multi-channel karaoke
DVD is playing. The karaoke channels on the disc will
mix into normal stereo sound.
Size
Since the speaker settings are fixed, you cannot
change the settings.
HD AV Sync
When using Digital TV.
Sometimes AV signal can not be transmitted
simultaneously because of later transmission of video
signal compared to audio signal.
Volume
Press b / B to adjust the output level of the selected
speaker. (-5dB ~ 5dB)
Because it takes some time to convert analog video
signal to digital one in the Digital TV.
And It means that you may not enjoy picture on the
screen and sound from speaker at the same time
even though it is one scene.
Distance
Since the speaker settings are fixed, you cannot
change the settings.
Test
In the HD AV Sync menu, you can adjust delay time to
audio signal for simultaneous AV signal transmission
Press b / B to test the signals of each speaker. Adjust
the volume to match the volume of test signals
memorized in the system.
Front Left (Front L) → Center → Front Right (Front R)
→ Rear Right (Rear R) → Rear Left (Rear L) →
SubWoofer
ꢀ
Delay time could be set up with 10msec unit.
(0 ~ 300ms)
ꢀ
Delay time is different according to each TV Brand.
So you need to adjust optimal delay time complying
with your TV.
13
LOCK (Parental Control)
OTHERS
OTHERS
LOCK
PBC
On
Rating
Unlock
DivX(R) Registration
Select
Password
Area Code
****
CA
Select
Move
Move
Select
Rating
PBC
Set Playback Control (PBC) to On or Off.
On: Video CDs with PBC are played according to
the PBC.
Off: Video CDs with PBC are played in the same
way as Audio CDs.
DivX(R) Registration
We provide you the DivX® VOD (Video On Demand)
registration code that allows you to rent and purchase
videos based on the DivX® VOD service. For more
1. Select “DivX(R) Registration” option and then
press B.
Blocks playback of rated DVDs based on their
contents. Not all discs are rated.
1. Select “Rating” on the LOCK menu then press B.
2. To access the LOCK options, you must input the
password you have created. If you have not yet
entered a password, you are prompted to do so.
Input a password and press ENTER. Enter it again
and press ENTER to verify. If you make a mistake
before pressing ENTER, press CLEAR.
3. Select a rating from 1 to 8 using the v / V buttons.
Rating 1-8: Rating one (1) has the most restrictions
and rating eight (8) is the least restrictive.
Unlock: If you select unlock, parental control is
2. Press ENTER while “Select” is selected and the
not active and the disc plays in full.
registration code will appear.
Use the registration code to purchase or rent the
videos from DivX® VOD service at
4. Press ENTER to confirm your rating selection, then
press SETUP to exit the menu.
download the video onto a disc for playback on
this unit.
Password
You can enter or change password.
1. Select Password on the LOCK menu and then
press B.
3. Press ENTER to exit.
2. Follow step 2 as shown above (Rating).
To change the password, press ENTER when the
“Change” option is highlighted. Input a password
and press ENTER. Enter it again and press
ENTER to verify.
Note:
All the downloaded videos from DivX® VOD can only
be played back on this unit.
3. Press SETUP to exit the menu.
If you forget your password
If you forget your password, you can clear it using the
following steps:
1. Press SETUP to display the Setup menu.
2. Input the 6-digit number “210499” and press
ENTER. The password is cleared.
Area Code
Enter the code of the area whose standards were
used to rate the DVD video disc, based on the list on
page 25.
1. Select “Area Code” on the LOCK menu then
press B.
2. Follow step 2 as shown in the rating section.
3. Select the first character using v / V buttons.
4. Press B and select the second character using
v / V buttons.
5. Press ENTER to confirm your Area code selection.
14
Operation
General features
Buttons
Operations
Discs
ALL
Z (OPEN / CLOSE)
X (PAUSE)
Opens or closes the disc tray.
During playback, press X to pause playback.
Press X repeatedly to play Frame-by-Frame.
ALL
DVD
VCD
DivX
SKIP (. / >)
During playback, press SKIP (. or >) to go to the next
chapter/track or to return to the beginning of the current
chapter/track.
ALL
Press SKIP . twice briefly to step back to the previous
chapter/track.
SCAN (m / M)
During playback, press SCAN (m or M) repeatedly to
select the required scan speed.
DVD : bb, bbb, bbbb, bbbbb, bbbbbb or
BB, BBB, BBBB, BBBBB, BBBBBB
DVD
ACD
VCD
MP3
DivX
WMA
DivX disc, Video CD : bb, bbb, bbbb, bbbbb or
BB, BBB, BBBB, BBBBB
WMA/MP3, Audio CD : m (X2, X4, X8) or M (X2, X4, X8)
REPEAT
REPEAT A-B
ZOOM
During playback, press REPEAT repeatedly to select a
desired repeat mode.
DVD Video discs: Chapter/Title/Off
ALL
DVD
DVD
DVD
Video CD, Audio CD, DivX/MP3/WMA discs: Track/All/Off
During playback, press REPEAT A-B to select a point A and
a point B and repeats a sequence from point A (Starting
point) to point B (End point).
VCD
VCD
Press REPEAT A-B to exit.
During playback or in the pause mode, press ZOOM to
enlarge the video image (3 steps).
You can move through the zoomed picture using b B v V
buttons.
TITLE
If the current DVD title has a menu, the title menu appears
on the screen. Otherwise, the disc menu may appear.
MENU
The disc menu appears on the screen.
DVD
DVD
DivX
DivX
(SUBTITLE)
During playback, press S-TITLE repeatedly to select a
desired subtitle language.
DVD
VCD
DVD
(AUDIO language) During playback, press AUDIO repeatedly to hear a different
audio language or audio track.
(AUDIO channel) Press AUDIO repeatedly during playback to hear a
different audio channel (STER., LEFT or RIGHT).
In the pause mode, press SCAN (m or M) to select the
required speed.
VCD
SLOW
DVD : t (1/2, 1/4, 1/8, 1/16) or T (1/2, 1/4, 1/8, 1/16)
Video CD : T (1/2, 1/4, 1/8, 1/16)
15
Screen Saver
Notes on general features:
ꢀ
Zoom may not work on some DVDs.
The screen saver appears when you leave the unit in
Stop mode for about five minutes.
ꢀ
The A-B repeat function is available only in the
current title.
Last Scene Memory DVD
This receiver memorizes the last scene from the last
disc that is viewed. The last scene remains in the
memory even if you remove the disc from the receiver
or switch off the receiver. If you load a disc that has
the scene memorized, the scene is automatically
recalled.
Additional features
1.5 times speed playback
DVD
VCD
ACD
MP3
WMA
You can play at 1.5 times speed.
The 1.5 speed allows you to watch the pictures and
listen to the sound quicker than playing at a normal
speed on the disc.
Note:
This receiver does not memorize the scene of a disc if you
switch off the receiver before commencing to play the disc.
1. During playback, press PLAY(B) to play at 1.5
times speed. “BX1.5” appears on the screen.
2. Press PLAY(B) again to exit.
Time Search DVD
VCD
DivX
To start playing at any chosen time on the disc:
1. Press DISPLAY during playback.
2. Press v / V to select the time clock icon and
“--:--:--” appears.
3. Input the required start time in hours, minutes, and
seconds from left to right. If you enter the wrong
numbers, press CLEAR to remove the numbers
you entered. Then input the correct numbers.
4. Press ENTER to confirm. Playback starts from the
selected time.
Marker Search DVD
To enter a Marker
VCD
DivX
You can start playback from up to nine memorized
points. To enter a marker, press MARKER at the
desired point on the disc. The Marker icon appears on
the TV screen briefly. Repeat to enter up to nine
markers.
To Recall or Clear a Marked Scene
1. During disc playback, press SEARCH. The marker
search menu appears on the screen.
2. Within 10 seconds, press b / B to select a marker
number that you want to recall or clear.
3. Press ENTER and playback starts from the
marked scene. Or press CLEAR and the marker
number is erased from the list.
4. You can play any marker by inputting its number
on the marker search menu.
16
Playing an Audio CD or
MP3/WMA file
Programmed Playback
The program function enables you to store your
favorite tracks from any disc in the receiver memory. A
program can contain 300 tracks.
This unit can play Audio CDs or MP3/WMA files.
MP3/ WMA/ Audio CD
Once you insert a CD with MP3/WMA files or Audio,
a menu appears on the TV screen.
1. Insert a disc.
Audio CD and MP3/WMA Discs:
2. Select a track on the “List” and then press PROG.
Press v / V to select a track/file and then press PLAY
or ENTER, and playback starts. You can use variable
playback functions. Refer to the page 15.
or select “
(Add)” icon and then press ENTER
to place the selected track on the “Program” list.
Repeat to place additional tracks on the list.
ID3 TAG
When playing a file containing information such as
track titles, you can see the information by pressing
DISPLAY. (Song, Artist, Album, Genre, Comment)
Note:
You can add all tracks in the disc. Select “
then press ENTER.
Add All)” icon
(
3. Select the track you want to start playing on the
“Program” list. Press MENU to move to the next
page.
Tips:
ꢀ
ꢀ
Press MENU to move to the next page.
On a CD with MP3/WMA and JPEG, you can
switch MP3/WMA and JPEG. Press TITLE, and
MUSIC or PHOTO top of the menu is highlighted.
4. Press PLAY or ENTER to start. Playback begins in
the order in which you programmed the tracks.
Playback stops after all of the tracks on the
“Program” list have played once.
MP3 / WMA disc compatibility with this player is limited
as follows:
•
Sampling frequency: within 32 - 48 kHz (MP3),
within 24 - 48kHz (WMA)
5. To resume normal playback from programmed
playback, select a track of AUDIO CD (or
MP3/WMA) list and then press PLAY.
•
•
Bit rate: within 32 - 320kbps (MP3), 40 - 192kbps (WMA)
The DVD/CD Receiver cannot read an MP3/WMA file
that has a file extension other than “.mp3” / “.wma”.
CD-R physical format should be ISO 9660
If you record MP3 / WMA files using software that cannot
create a file system (eg. Direct-CD) it is impossible to
playback MP3 / WMA files.We recommend that you use
Easy-CD Creator, which creates an ISO 9660 file
system.
File names should have a maximum of 8 letters and
must incorporate an .mp3 or .wma extension.
They should not contain special letters such as / ? * : “
< > l etc.
•
•
Repeat Programmed Tracks
1. Press REPEAT when playing a disc. The repeat
icon appears.
2. Press REPEAT to select a desired repeat mode.
• TRACK: repeats the current track
• ALL: repeats all the tracks on programmed list.
• Off (No display): does not play repeatedly.
•
•
•
Erasing a Track from “Program” List
The total number of files on the disc should be less than
999.
1. Use v V to select the track that you wish to erase
from the Program list.
This DVD/CD Receiver requires discs and recordings to
meet certain technical standards in order to achieve
optimal playback quality. Pre-recorded DVDs are
automatically set to these standards. There are many
different types of recordable disc formats (including CD-R
containing MP3 or WMA files) and these require certain
pre-existing conditions (see above) to ensure compatible
playback.
2. Press CLEAR. Alternatively, select “
(Delete)”
icon then press ENTER to place the selected track
on the Program list. Repeat to erase additional
tracks on the list.
Erasing the Complete Program List
Customers should note that permission is required in
order to download MP3 / WMA files and music from the
Internet. Our company has no right to grant such
permission. Permission should always be sought from
the copyright owner.
Use v / V to select “
ENTER.
(Del all)” and then press
Note:
The programs are also cleared when the disc is removed.
17
JPEG
JPEG disc compatibility with this player is
limited as follows:
Viewing a JPEG file
This unit can play discs with JPEG files.
Before playing JPEG recordings, read the notes on
JPEG Recordings on the right.
• Depending upon the size and the number of
JPEG files, it could take a long time for the
DVD/CD Receiver to read the disc’s contents. If
you don’t see an on-screen display after several
minutes, some of the files may be too large —
reduce the resolution of the JPEG files to less
than 2M pixels as 2760 x 2048 pixels and burn
another disc.
1. Insert a disc and close the tray.
The PHOTO menu appears on the TV screen.
PHOTO
List
Preview
JPEG Folder
JPEG Folder
JPEG Folder
JPEG Folder
JPEG Folder
JPEG Folder
JPEG Folder
JPEG Folder
1
2
3
4
5
6
7
8
• The total number of files and folders on the disc
should be less than 999.
• Some discs may not operate due to a different
recording format or the condition of disc.
2. Press v / V to select a folder, and then press
ENTER. A list of files in the folder appears.
If you are in a file list and want to return to the
previous Folder list, use the v / V buttons on the
• Ensure that all the selected files have the “.jpg”
extensions when copying into the CD layout.
• If the files have “.jpe” or “.jpeg” extensions,
please rename them as “.jpg” file.
remote control to highlight
and press ENTER.
• File names without “.jpg” extension will not be
able to be read by this DVD/CD Receiver. Even
though the files are shown as JPEG image files in
Windows Explorer.
3. If you want to view a particular file, press v / V to
highlight a file and press ENTER or PLAY. While
viewing a file, you can press STOP to move to the
previous menu (JPEG menu).
Tips:
ꢀ
There are four Slide Speed options
:
> (Slow), >> (Normal), >>> (Fast) and II (off).
Use v /V /b /B to highlight the Speed. Then, use b / B
to select the option you want to use and then press
ENTER.
ꢀ
If you set Speed option to Off, the slide is not active.
Slide Show
Use v V b B to highlight the
(Slide Show) then
press ENTER.
Still Picture
1. Press PAUSE/STEP during the slide show.
The DVD/CD Receiver will now go into the PAUSE
mode.
2. To return to the slide show, press PLAY or press
PAUSE/STEP again.
Moving to another File
Press SKIP (. or >) once during viewing a
picture to advance to the next or previous file.
Rotating the picture
Press v V b B during showing a picture to rotate the
picture clockwise or counter-clockwise.
18
Playing a DivX Movie file
Using this DVD/CD Receiver you can play DivX disc.
DivX disc compatibility with this player is limited
as follows:
• Available resolution size of the DivX file is under
800x600 (W x H) pixel.
1. Insert a disc and close the tray. The MOVIE menu
appears on the TV screen.
• The file name of the DivX subtitle is available by
45 characters.
MOVIE
0:00:00
List
Movie Folder
Movie Folder
Movie Folder
Movie Folder
Movie Folder
Movie Folder
Movie Folder
Movie Folder
1
2
3
4
5
6
7
8
• If there is impossible code to express in the DivX
file, it may be displayed as " _ " mark on the
display.
• If the number of the screen frame is over 30
per 1 second, this unit may not operate
normally.
2. Press v / V to select a folder and then press
ENTER. A list of files in the folder appears. If you
are in a file list and want to return to the Folder list,
use the v / V buttons on the remote control to
• If the video and audio structure of recorded
files are not interleaved, either video or audio
is outputted.
highlight
and press ENTER.
3. If you want to view a particular file, press
Playable DivX file
v / V to highlight a file and press ENTER or PLAY.
• ".avi ", ".mpg ", ".mpeg ", ".divx"
4. Press STOP to exit.
Playable Subtitle format
• SubRip(*.srt/*.txt)
SAMI(*.smi)
SubStation Alpha(*.ssa/*.txt)
MicroDVD(*.sub/*.txt)
SubViewer 2.0(*.sub/*.txt)
VobSub(*.sub)
Notice for displaying the Divx subtitle
If the subtitle does not display properly during playback,
press and hold S-TITLE for about 3 seconds then press
S-TITLE to select another language code until the
subtitle is displayed properly
Tips:
Playable Codec format
• "DIVX3.xx ", "DIVX4.xx ", "DIVX5.xx ",
"MP43 ", "3IVX ".
ꢀ Press MENU to move to the next page.
ꢀ On a CD with MP3/WMA, JPEG and MOVIE file,
you can switch MUSIC, PHOTO and MOVIE menu.
Press TITLE, and MUSIC, PHOTO and MOVIE
word on top of the menu is highlighted.
Playable Audio format
"AC3 ", "DTS ", "PCM ", "MP3 ", "WMA ".
• Sampling frequency: within 32 - 48 kHz (MP3),
within 24 - 48kHz (WMA)
• Bit rate: within 32 - 320kbps (MP3),
40 - 192kbps (WMA)
Notes:
ꢀ Be sure to select “SUBTITLE ON” mode by
pressing the subtitle file every time before playing a
DivX file .
ꢀ When the subtile has more than two languages in
the file, original subtile is only available.
ꢀ You can not adjust sound mode and VIRTUAL
sound during the DivX file playing.
19
DVD Audio Discs
Moving to another GROUP
Some DVD Audio discs divide content into different
groups. Your player enables you to quickly access
different groups during playback via the on-screen
display.
DVD Audio is a new disc format building on the
success of DVD to provide high quality,
uncompressed, multi-channel audio for a new
experience in audio quality. A DVD Audio disc can be
identified by the DVD audio logo on the disc jacket or
on the disc itself.
1. Press DISPLAY during playback on in stop mode.
2. Press 3/4 to select Group icon.
DVD Audio can provide higher quality stereo than
Audio CDs with a sampling rate of up to 192kHz
(compared to 44.1kHz for CDs). DVD Audio digital
sound can be delivered with up to 24 bits of data
(compared to 16 bits for a standard CD).
3. Press 1/2 or the numbered buttons (0-9) to select
a group number.
Note:
Sometimes the author of the disc creates hidden
content that can only be accessed by entering a
password. If the lock icon appears on the TV screen,
enter the password (sometimes you’ll find it on the
disc’s jacket cover or on a web site). This password
control isn’t dictated by your DVD/CD Receiver — it is
a function of the disc.
A typical DVD Audio disc contains up to seven times
the data capacity of a CD. This additional space is
used for music, either Advanced Resolution multi-
channel sound quality that is closer to the artist’s
master recording or for longer recordings. Many DVD
Audio discs contain on-screen text, such as artist
biographies, playlists, or lyrics. Some DVD Audio
discs contain photo galleries or video clips.
Since the authoring of DVD Audio Discs varies, some
of the on-screen display choices might not be
available for the disc you’re playing.
Viewing another PAGE
Since DVD Audio discs can hold a lot of content, there
are various ways to see what’s available on the disc.
1. Press DISPLAY during playback.
2. Press 3/4 to select Page icon.
3. Press 1/2 to select a page number.
What appears on the screen will vary from disc to
disc because the information available depends
upon the way the disc was created.
Note:
Since the authoring of DVD Audio Discs varies, some
of the on-screen display choices might not be
available for the disc you’re playing.
20
Presetting the Radio Stations
Listening to the Radio
You can preset 50 stations for FM and AM (MW).
Before tuning, make sure that you have turned down
the volume.
Preset radio stations in the DVD/CD Receiver’s
memory first (see “Presetting radio stations” on the
left).
1. Press TUNER on the remote control until FM or
AM (MW) appears in the display window.
1. Press TUNER until FM or AM (MW) appears in the
display window.
The last received station is tuned in.
2. And then every time you press TUNER, FM and
AM (MW) changes alternately.
2. Press PRESET (-/+) repeatedly on the remote
control to select the preset station you want.
Each time you press the button, the DVD/CD Receiver
tunes in one preset station at a time.
3. Press and hold TUN.(-/+) for about two seconds
until the frequency indication starts to change,
then release.
Scanning stops when the DVD/CD Receiver tunes in a
station.
3. Adjust the volume by rotating VOLUME on the
front panel or by pressing VOLUME + or - on the
remote control repeatedly.
4. Press PROG./MEMO. on the remote control.
A preset number will flash in the display window.
To turn off the radio
Press POWER to turn the DVD/CD Receiver off or
select another function mode (DVD/CD, AUX, USB).
5. Press PRESET (-/+) on the remote control to
select the preset number you want.
To listen to non-preset radio stations
ꢀ Use manual or automatic tuning.
6. Press PROG./MEMO. on the remote control again.
The station is stored.
ꢀ For manual tuning, press TUN.(-/+) repeatedly.
7. Repeat steps 3 to 6 to store other stations.
ꢀ For automatic tuning, press and hold TUN.(-/+) for
about two seconds on the front panel.
To tune in a station with a weak signal
Press TUN.(-/+) repeatedly in step 3 to tune in the
station manually.
To select a preset radio station directly
You can use the number buttons on the remote
control to select a preset radio station directly.
For example, to listen to the preset station 4, press 4
on the remote control. To listen to the preset station
19, press 1 and then 9 (within 3 seconds).
To clear all the stored stations
Press and hold PROG./MEMO. for about two seconds
and “ERASE ALL” appears in the display window and
then press PROG./MEMO. again, the stations are
cleared.
For your reference
ꢀ If an FM program is noisy
Press MONO/ST. on the front panel to make
“STEREO” disappear in the display window. There
will be no stereo effect, but the reception will
improve. Press the button again to restore the
stereo effect.
ꢀ If you have accidentally entered into the "ERASE
ALL" mode and you do not wish to clear the
memory, do not press any key. After a few seconds,
"ERASE ALL" will go off by itself and change to
normal mode.
Note:
ꢀ To improve reception
Reorient the supplied antennas.
If all stations have already been entered, the FULL
message will appear in the display window for a
moment and then a preset number will flash.
To change the preset number, follow steps 5-6 as
above.
21
Sleep Timer Setting
You can set the DVD/CD Receiver to turn off
automatically at a specified time.
XTS/XTS pro
Each time you press XTS pro the setting changes in
the following order.
1. Press SLEEP to set the desired sleep time.
The SLEEP indicator and the sleep time appears in the
display window.
XTS ON → NORMAL → XTS-P ON...
ꢀ
ꢀ
XTS-P ON
The unique sound quality of the LG Technology
creates the optimum sound for you to play the
perfect playback of the original sound and to feel
the living sound source.
2. Each time you press SLEEP the setting
changes in the following order.
SLEEP 180 →150 →120→90 →80 → 70 → 60→ 50 →
40 → 30 → 20 →10 →OFF (No display)
XTS ON
When playing a movie with weak bass relative to
the general music, it forces sound to the woofer.
In the mode of 2 CH BYPASS, It creates the high
display effect by playing the sound source via the
rear speakers same as the front speakers.
Note:
You can check the remaining time before the DVD/CD
Receiver turns off.
Press SLEEP. The remaining time appears in the
display window.
Note
The XTS mode is temporarily disabled when changing from
2.1 CH to 5.1 CH and it is enabled when changing it to 2.1
CH.
Dimmer
This function will change the brightness of the display
window on the front panel during in power-on status.
ꢀ
NORMAL
Press the DIMMER repeatedly.
XTS-P and XTS mode tune off
Mute
VIRTUAL sound
Press MUTE to mute your unit.
Press VSM to set the VIRTUAL sound.
You can mute your unit in order, for example, to
answer the telephone, the “MUTE” indicator flashes in
the display window.
Source
2.1 ch.
5.1 ch
Display
VIRTUAL
VIRTUAL
Effect
3D STEREO
Multichannel sound
Selecting input source
You can use VCRs or other units connected to the AV
IN or Optical connector. Refer to the Owner’s Manual
supplied with the unit for further information on the
operation.
ꢀ
3D STEREO
Realtime 3D positioned sound rendering
technology with stereo sources, optimized for
stereo speakers. Listeners may experience
amazing virtual surround effects with their own
multimedia players.
Press AUX repeatedly on the remote control to
select the desired input source.
Each time you press this button, the mode of the
function changes in the following sequence:
ꢀ
Multichannel sound
ꢀ AUX : for selecting the analog signal from AUX AUDIO
Input (L/R) Connector.
The Multichannel sound changes the sound in 5.1
ch into a virtual one in the 10.1 ch so that it
provides such a feeling that you listen to the sound
simultaneously from the right and left speakers and
center speaker.
ꢀ AUX OPT: for selecting the optical digital signal from
OPTICAL IN Connector.
ꢀ AUDIO IN: for selecting the analog signal from AUDIO IN
Connector.
Sound Mode
You can enjoy surround sound simply by selecting
one of the pre-programmed sound fields according to
the program you want to listen to. (2 ch. sound only)
Notes
ꢀ The Optical input function is available only when the
sampling frequency of other unit is 32 - 96kHz.
ꢀ You can also select the input source by pressing
FUNC. button on the front panel.
Press SOUND button repeatedly.
The sound mode is changed in the display window in
the following order.
BYPASS → ON STAGE → STUDIO → CLUB → HALL
→ THEATER 1 → CHURCH → PL ll MOVIE
Press and hold this button for about 3 seconds,
then press repeatedly to select other function.
→ PL ll MUSIC → PL ll MTRX → BYPASS...
Note:
Initial sound mode is BYPASS.
22
Controlling other TVs with the
Supplied Remote Control
You can control the sound level, input source, and
power switch of non-LG TVs as well. If your TV is
listed in the table below, set the appropriate
manufacturer code. (refer to page 28)
TUNER
AUX
OPEN/CLOSE
POWER
DIMMER
DVD
USB
PROG./MEMO.
AUDIO
SOUND
S-TITLE
CLEAR
1. While holding down TV POWER button, press the
number buttons to select the manufacturer code
for your TV (Refer to table on the right column).
REPEAT
REPEAT A-B
MARKER
SEARCH
SCAN
TITLE
SKIP
+
SCAN +
PAUSE/STEP
2. Release TV POWER button.
STOP
PLAY
Controlling your TV with the
Suppllied Remote Control
ZOOM
DISPLAY
RETURN
SETUP
MENU
You can control the sound level, input source, and
power switch of your LG TV with the supplied Remote
Control.
ENTER
You can control your TV using the buttons below.
By pressing
You can
SLEEP
MUTE
TV POWER
Turn the TV on or off.
VOL
CHANNEL(v / V) Scans up or down through
memorized channels.
VOLUME +/–
TV INPUT
Adjust the volume of the TV.
Switch the TV’s input source
between the TV and other input
sources.
RESOL .
HDMI
Note:
Depending on the unit being connected, you may not
be able to control your TV using some of the buttons.
POWER
INPUT
CHANNEL
VOLUME
TV Control
Buttons
23
Controlling Your TV with the Supplied Remote Control (Continued)
If more than one code number is listed, try entering them one at a time until you find the one that works with
your TV.
Manufacturer
ADMIRAL
AIWA
Code Number
16,33,37,44,45
70
01
Manufacturer
MONTGOMERY
WARD
Code Number
01,06,08,09
23,24,32,33,34
01,08
AKAI
NEC
AMARK
09
NOBLEX
07
AOC
01
33
18,19
51
07
08
43
49,50,51,52,53,54,55
09
09
01,03,08,33,35,37,44
16,38,39,40,41,42,43
01,08
01,09,16,17,18,19
28,29
PACKARD BELL
PANASONIC
PHILCO
43
BELL & HOWELL
BROKSONIC
CANDLE
07,11,13,25,35,36
01,06,07,08,09,
15,38,43,58
06,07,43,61,62,65
30
09
03,37,44
11,13
16,17,23
01,03,37,44,69
16,17,23
08
01,08,09,25,68
28,29
01,08
09,25,26,27,28,29
64
09,22,23,24,60,66
01,06,08,09,10,
23,24,33,34
12,62
51
PHILIPS
CCE
PIONEER
PORTLAND
PROSCAN
QUASAR
RADIO SHACK
RCA
REALISTIC
SAMPO
SAMSUNG
SANYO
CENTURION
CINERAL
CITIZEN
CORONADO
CROWN
CURTIS MATHES
DAEWOO
DAYTRON
EMERSON
FISHER
SCOTT
SEARS
SEMP
SHARP
FUNAI
46,47
GENERAL ELECTRIC
GRADIENTE
HITACHI
JC PENNEY
JVC
KIOTE
KMC
KTV
LG (GOLDSTAR)
LODGENET
LOGIK
LXI
MAGNAVOX
03,10,11,13,37,44
01,56,57,63,67
09,14,15,43
01,08,10,27,35
20,21,63,67
43
SIGNATURE 2000
SONY
SOUNDESIGN
SYLVANIA
09
01,04,05,06,07,
08,35,51
46,47
01,08,09,31
01,07,08,09,35,39,40
33
SYMPHONIC
TATUNG
TEKNIKA
TELERENT
THOMSON
YORX
TOSHIBA
WARDS
XR1000
11
33
07,09,16,33,51
09,33
69
08
01,25,26,27,64
01,06,08,09,10,33,34
48
09,24,25,26,27,28,29
01,02,04,05,06,
07,08,09,20,
34,35,43,51,61,62,65
33
01,32
MAJESTIC
MARANTZ
MEMOREX
MGA/MITSUBISHI
33
ZENITH
01, 02,33,59
01,08,32,34
Notes:
• Depending on your TV, some or all buttons may not function on the TV, even after entering the correct manufacturer code.
• If you enter a new code number, the code number previously entered will be erased.
• When you replace the batteries of the remote, the code number you have set may be reset to the default setting. Set the
appropriate code number again.
24
Reference
Language Codes
Use this list to input your desired language for the following initial settings:
Disc Audio, Disc Subtitle, Disc Menu.
Language
Abkhazian
Afar
Afrikaans
Albanian
Ameharic
Arabic
Armenian
Assamese
Aymara
Azerbaijani
Bashkir
Basque
Bengali; Bangla
Bhutani
Bihari
Breton
Bulgarian
Burmese
Byelorussian
Cambodian
Catalan
Chinese
Corsican
Croatian
Czech
Code
6566
6565
6570
8381
6577
6582
7289
6583
6588
6590
6665
6985
6678
6890
6672
6682
6671
7789
6669
7577
6765
9072
6779
7282
6783
6865
7876
6978
6979
6984
7079
Language
Fiji
Finnish
French
Frisian
Galician
Georgian
German
Greek
Greenlandic
Guarani
Gujarati
Hausa
Code
7074
7073
7082
7089
7176
7565
6869
6976
7576
7178
7185
7265
7387
7273
7285
7383
7378
7365
7165
7384
7465
7487
7578
7583
7575
7589
7579
7585
7679
7665
7686
Language
Lingala
Lithuanian
Macedonian
Malagasy
Malay
Malayalam
Maltese
Maori
Code
7678
7684
7775
7771
7783
7776
7784
7773
7782
7779
7778
7865
7869
7879
7982
8065
8083
7065
8076
8084
8185
Language
Singhalese
Slovak
Slovenian
Somali
Spanish
Sudanese
Swahili
Swedish
Tagalog
Tajik
Code
8373
8375
8376
8379
6983
8385
8387
8386
8476
8471
8465
8484
8469
8472
6679
8473
8479
8482
8475
8487
8575
8582
8590
8673
8679
6789
8779
8872
7473
8979
9085
Marathi
Moldavian
Mongolian
Nauru
Nepali
Norwegian
Oriya
Panjabi
Pashto, Pushto
Persian
Polish
Portuguese
Quechua
Rhaeto-Romance 8277
Rumanian
Russian
Samoan
Sanskrit
Scots Gaelic
Serbian
Serbo-Croatian
Shona
Tamil
Tatar
Hebrew
Hindi
Telugu
Thai
Tibetan
Tigrinya
Tonga
Turkish
Turkmen
Twi
Ukrainian
Urdu
Hungarian
Icelandic
Indonesian
Interlingua
Irish
Italian
Japanese
Javanese
Kannada
Kashmiri
Kazakh
Kirghiz
8279
8285
8377
8365
7168
8382
8372
8378
8368
Uzbek
Vietnamese
Volapük
Welsh
Wolof
Xhosa
Yiddish
Yoruba
Zulu
Danish
Dutch
English
Esperanto
Estonian
Faroese
Korean
Kurdish
Laothian
Latin
Latvian, Lettish
Sindhi
Area Codes
Choose a area code from this list.
Area
Code
AF
AR
AU
AT
Area
Ethiopia
Fiji
Finland
France
Germany
Great Britain
Greece
Greenland
Code
ET
FJ
Area
Code
MY
MV
MX
MC
MN
MA
NP
Area
Saudi Arabia
Senegal
Singapore
Slovak Republic
Slovenia
South Africa
South Korea
Spain
Sri Lanka
Sweden
Switzerland
Taiwan
Thailand
Turkey
Code
SA
SN
SG
SK
SI
Afghanistan
Argentina
Australia
Austria
Belgium
Bhutan
Bolivia
Brazil
Cambodia
Canada
Chile
China
Colombia
Congo
Costa Rica
Croatia
Czech Republic
Denmark
Ecuador
Egypt
Malaysia
Maldives
Mexico
Monaco
Mongolia
Morocco
Nepal
Netherlands
Netherlands Antilles AN
New Zealand
Nigeria
Norway
FI
FR
DE
GB
GR
GL
BE
BT
ZA
BO
BR
KH
CA
CL
CN
CO
CG
CR
HR
CZ
DK
EC
EG
SV
KR
ES
LK
NL
Heard and McDonald Islands HM
Hong Kong
Hungary
India
Indonesia
Israel
Italy
Jamaica
Japan
Kenya
Kuwait
Libya
Luxembourg
HK
HU
IN
ID
IL
NZ
NG
NO
OM
PK
PA
PY
PH
PL
SE
CH
TW
TH
TR
UG
UA
US
UY
UZ
VN
ZW
Oman
Pakistan
Panama
Paraguay
Philippines
Poland
Portugal
Romania
Russian Federation RU
IT
Uganda
Ukraine
United States
Uruguay
Uzbekistan
Vietnam
JM
JP
KE
KW
LY
LU
PT
RO
El Salvador
Zimbabwe
25
Troubleshooting
Check the following guide for the possible cause of a problem before contacting service.
Correction
Cause
Symptom
No power.
• Plug the power cord securely into the
wall outlet.
• The power cord is disconnected.
• Insert a disc. (Check that the DVD or,
audio CD indicator in the DVD display
is lit.)
• No disc is inserted.
The power is on, but
the DVD/CD Receiver
does not work.
• Select the appropriate video input
mode on the TV so the picture from
the DVD/CD Receiver appears on the
TV screen.
• The TV is not set to receive DVD signal
output.
No picture.
• Connect the video cable into the
jacks securely.
• The video cable is not connected
securely.
• Turn on the TV.
• The connected TV power is turned off.
There is no sound or
only a very low-level
sound is heard.
• Select the correct input mode of the
audio receiver so you can hear the
sound from the DVD/CD Receiver.
• The equipment connected with the
audio cable is not set to receive DVD
signal output.
• Connect the audio cable into the
jacks securely.
• The audio cables are not connected
securely.
• Turn on the equipment connected
with the audio cable.
• The power of the equipment connected
with the audio cable is turned off.
• Replace it with new one.
• Clean the disc.
• The audio connecting cable is damaged.
• The disc is dirty.
The playback picture is
poor.
• Insert a disc. (Check that the DVD, or
audio CD indicator in the DVD display
is lit.)
The DVD/CD Receiver • No disc is inserted.
does not start playback.
• Insert a playable disc. (Check the
disc type, colour system and Regional
code.)
• An unplayable disc is inserted.
• Place the disc with the playback side
down.
• The disc is placed upside down.
• Place the disc on the disc tray
correctly inside the guide.
• The disc is not placed within the guide.
• Clean the disc.
• The disc is dirty.
• Press the SETUP button to turn off
the menu screen.
• A menu is on the TV screen.
• Cancel the Rating function or change
the rating level.
• The Rating level is set.
• Clean the disc.
Loud hum or noise is
heard.
• The disc is dirty.
• Connect the speakers and
components securely.
• The speakers and components are
connected poorly.
• Move your TV away from the audio
components.
• The DVD/CD Receiver is located too
close to the TV.
26
Cause
Correction
Symptom
• The antenna is positioned or connected
poorly.
• Connect the antenna securely.
Radio stations cannot
be tuned in.
• Adjust the antennas and connect an
external antenna if necessary.
• The signal strength of the stations is too
weak (when tuning in with automatic
tuning).
• Tune in the station manually.
• No stations have been preset or preset
stations have been cleared (when
tuning by scanning preset stations).
• Preset the stations (page 21).
• The remote control is not pointed at the • Point the remote control at the remote
The remote control
does not work
properly.
remote sensor of the DVD/CD Receiver.
sensor of the DVD/CD Receiver.
• The remote control is too far from the
DVD/CD Receiver.
• Use the remote control within about 23
ft (7 m).
• There is an obstacle in the path of the
remote control and the DVD/CD
Receiver.
• Remove the obstacle.
• The batteries in the remote control are
flat.
• Replace the batteries with new ones.
• Press DIMMER on the remote control.
The front panel
display is too dim.
• Nothing is displayed on the front panel
display.
27
Specifications
Power supply
Power consumption
Refer to main label.
Refer to main label.
Net Weight
4 kg
External dimensions (W x H x D)
Operating conditions
Operating humidity
430 x 70 x 305 mm
Temperature: 5°C to 35°C, Operation status: Horizontal
5% to 85%
Laser
Signal system
Semiconductor laser, wavelength 650 nm
NTSC 525/60
Frequency response (audio)
Signal-to-noise ratio (audio)
Dynamic range (audio)
Harmonic distortion (audio)
Video input
240 Hz to 20 kHz
More than 75 dB (1 kHz, NOP -6 dB, 20 kHz LPF/A-Filter)
More than 70 dB
0.5 % (1 kHz, at 1W position) (20 kHz LPF)
1.0 V (p-p), 75 Ω, negative sync., RCA jack x 1
1.0 V (p-p), 75 Ω, negative sync., RCA jack x 1
(Y) 1.0 V (p-p), 75 ohms, negative sync, RCA jack x 1
(PB)/(PR) 0.7 V (p-p), 75 ohms, RCA jack x 1
87.5 - 108.0 MHz or 65.0 - 74.0 MHz, 87.5 - 108.0 MHz
10.7 MHz
Video output
COMPONENT VIDEO OUT
Tuning Range
Intermediate Frequency
Signal-to Noise Ratio
Frequency Response
Tuning Range
Intermediate Frequency
Stereo mode
60 dB (Mono)
240 - 10,000 Hz
522 - 1,620 kHz or 520 - 1,720 kHz
450 kHz
100 W + 100 W (4Ω at 1 kHz, THD 10 %)
Front: 100 W + 100 W (THD 10 %)
Center*: 100 W
Surround*: 100 W + 100 W (4Ω at 1 kHz, THD 10 %)
Subwoofer*: 200 W (3Ω at 70 Hz, THD 10 %)
AUDIO IN, OPTICAL IN
Surround mode
(* Depending on the sound mode
settings and the source, there
may be no sound output.)
Inputs
Outputs
MONITOR OUT, HDMI OUT,
COMPONENT VIDEO OUT
Front Speaker
(SH72PZ-F)
2 Way 2 Speaker
4 Ω
Rear Speaker
(SH72PZ-S)
2 Way 2 Speaker
4 Ω
Type
Impedance
Frequency Response
Sound Pressure Level
Rated Input Power
Max. Input Power
Net Dimensions (W x H x D)
Net Weight
100 - 20000 Hz
82 dB/W (1m)
100 W
200 W
300 x 1277 x 300 mm
4.11 kg
170 - 20000 Hz
82 dB/W (1m)
100 W
200 W
98 x 260 x 100 mm
0.38 kg
Center speaker
(SH72PZ-C)
2 Way 2 Speaker
4 Ω
Passive Subwoofer
(SH72PZ-W)
1 Way 1 Speaker
3 Ω
Type
Impedance
Frequency Response
Sound Pressure Level
Rated Input Power
Max. Input Power
Net Dimensions (W x H x D)
Net Weight
80 - 18000 Hz
82 dB/W (1m)
100 W
200 W
430 x 107 x 83 mm
1.12kg
40 - 1500 Hz
80 dB/W (1m)
200 W
400 W
165 x 422 x 415 mm
7.23 kg
P/NO : MFL49511791
|