• Flexibly expandable control panel
network for mid-sized/large systems
• Easy installation since control panels
can be arranged physically distributed
• With or without display and operating
field
• Analogue ringbus technology with
unshielded detector cabling
• Addressable conventional technology
• EN 54/VdS-certified
Fire is a permanent threat to life and property. There- ted within LST premises, thus guaranteeing flexible and
fore, immediate response to a fire is imperative. The reliable individual solutions.
main objective of the fire detection control panel Series
BC216 is to alarm and to react in time and, conse- Using a 32-bit multiprocessor system, the fire detection
quently, save lives and protect property. For decades control panel Series BC216 ensures topmost efficiency
LST have focused their aims to undertaking unrivaled and speed – prerequisites for saving lives and minimi-
efforts in order to realize new innovations in the security zing damage to property.
area. Research, development and production are loca-
Description
The Fire Detection Control Panel BCnet216 in wall mount panels.
cabinet is a decentrally located control panel for medi- The BCnet sectional control panels with wall mount ca-
um-sized to very large or far-flung fire detection sys- binet are available with (BC216-2) or without (BC216-3)
tems and consists of individual sectional control panels. display and operating field. Both versions provide two
The sectional control panels are normally installed on slots for the connection of function modules (Conventi-
the spot – adapted to the object and distributed across onal Detector Interface GIF8-1 or Loop Interface LIF64-
the building. They can, however, also be combined at 1) to which a total of 16 detector lines in addressable
one or several locations.
conventional technology or a total of two ADM loops
The control panel can easily be adapted to any required (ringbus technology) or a combination of the both can
system size and provides literally unlimited possibilities be connected.
also for future extensions.
The sectional control panel can be expanded by two
additional ADM loops with the BCnet sectional control
All sectional control panels are connected with each panel/extension. This way, up to four ADM loops can be
other via a redundant high-security network (the Global provided in one wall mount cabinet.
Security System network GSSnet). The decentralized
structure not only reduces the cabling work for con- Easy parameterisation by means of PC software en-
necting fire detectors, but also, above all, significantly ables you to optimally adapt the control panel to your
improves the failure safety of the entire system com- individual requirements.
pared to conventionally designed fire detection control
Building Safety. Building Security.
A
© LABOR STRAUSS SICHERUNGSANLAGENBAU GMBH • A-1231 WIEN • WIEGELESTRASSE 36 • TEL +43 1 52114-0 • FAX +43 1 52114-27
BC216-2_DBL_LST_EN_0804.PDF • PAGE 1
[email protected] • WWW.LST.AT • ALL RIGHTS RESERVED
Distributed Intelligence in the GSSnet
The fire detection control panel BCnet216 opens up As you can see in the figure below, cabling of the detec-
manifold possibilities for the realization of specific tors is required only between two neighboring sectional
requests of fire detection, especially in spacious buil- control panels. This clear and flexible arrangement of
dings, high-rise buildings or wide-stretched areas. The the sectional control panel creates a powerful network.
decentralized security network that has been created In this way, most economical cabling and thus efficient
by BCnet216 offers increased security and reduces the use of the installation expenses is guaranteed. Larger
total expenses due to a much lower cabling volume. distances between individual sectional control panels
The consistent ring-shaped cabling guarantees commu- can be bridged through the use of optical fiber modems
nication between the sectional control panels even in or long distance modems.
the event of a line fault.
The entire virtual control panel BCnet216 provides for
A sectional control panel of the BCnet216 is parame- the monitoring in mid-sized and large systems, applying
terised as main operating unit for the administration of the same technology and the same software tools as
the GSSnet, all other members can be equipped with with the single control panel BC216-1. This guarantees
or without a display and operating unit. The system is a minimum of training and expansion costs as well as
designed modularly and can be gradually expanded expenses of the user and thus guarantees the optimal
according to future demands. The maximum size of a use of resources during the usable life of the building.
BCnet216 comprises 127 network members, 9700 de-
tector zones, 9700 actuations, 999 alarming devices, BCnet sectional control panels are available in wall
99 transmitting devices as well as 199 logic sectors. mount cabinets, as 19“ compact version and in 19“
Different interfaces are available for the connection of slide-in technology.
external information devices, e.g., a facility manage-
ment system or a remote maintenance system.
Building Safety. Building Security.
A
© LABOR STRAUSS SICHERUNGSANLAGENBAU GMBH • A-1231 WIEN • WIEGELESTRASSE 36 • TEL +43 1 52114-0 • FAX +43 1 52114-27
BC216-2_DBL_LST_EN_0804.PDF • PAGE 3
[email protected] • WWW.LST.AT • ALL RIGHTS RESERVED
Permanent Connection
A variety of peripheral devices can be connected to the
fire detection control panel BCnet216:
• Fire brigade key safe
• Transmitting device for the actuation of pagers via
ESPA protocol
• Modules for remote parameterisation and remote
maintenance via computer newtork, modem or GSM
connection
• Transmitter module for the transmission of messages
via SMS or e-mail
– and much more.
• Fire brigade control unit
• Acoustic and optical signaling devices
• External protocol printer
• Remote display and operating panels
• Remote indication unit
• Actuations
• Electronic monitoring system
Extinguishing Control System
If required, the BCnet216 can be easily expanded to The LCnet216 is certified to EN 54-2, EN 54-4,
an extinguishing control panel LCnet216 according to EN 12094-1 and VdS as a pure extinguishing control
EN 12094-1. The panel can control up to 127 flooding panel and as a combined fire detection and extinguis-
zones in a maximum of 127 extinguishing systems.
hing control panel.
The function of the extinguishing control panel is fully in- Optionally, the LCnet216 can be implemented with full
tegrated into the fire detection control panel BCnet216, hardware redundancy.
a combined operation is therefore possible.
Specifications
Mains voltage
230VAC +10/-15%, 50Hz
60VA
Connection power
Output voltage
typ. 28VDC
Output peak current
Connection of external devices
Own current consumption at 24V
max. 1.8A
typ. 0.8A, site-specific
BC216-2: typ. 125mA (without optional componentries)
BC216-3: typ. 90mA (without optional componentries)
Ambient temperature
Dimensions W × H × D
Colour
-5°C to +50°C
420 × 520 × 120 (mm)
gray-white, RAL 9002
approx. 6kg
Weight without accumulator
Approvals (EN 54-2, EN 54-4)
VdS G201017
FT 14/147/3/99 (Austria),
Sectional control panel with display and operating unit
Order name
BCnet Sectional control panel/Op. BC216-2
Sectional control panel without display and operating unit
Order name
BCnet sectional control panel/n. op. BCnet216–3
Building Safety. Building Security.
A
© LABOR STRAUSS SICHERUNGSANLAGENBAU GMBH • A-1231 WIEN • WIEGELESTRASSE 36 • TEL +43 1 52114-0 • FAX +43 1 52114-27
BC216-2_DBL_LST_EN_0804.PDF • PAGE 4
[email protected] • WWW.LST.AT • ALL RIGHTS RESERVED
|