La Crosse Technology Clock WT 8002U User Manual

Inventory of Contents  
1. WT-8002 Clock  
La Crosse Technology®  
WT-8002U  
2. Mounting hardware  
3. Instruction manual  
Digital Clock with Indoor Temperature  
Features and Specifications  
Digital time and date  
12/24 hour time  
Indoor temperature (°F or °C) (32°F to 122°F  
- 0°C to 50°C)  
Time alarm with snooze  
Calendar: month, date and weekday  
Wall hanging or free standing  
Battery: 1 X “AA” size 1.5V (not included)  
Battery life: Up to 24 months  
Dimensions: 8.62" L x 1.29" W x 6.81" H  
(218.9 x 32.7 x 172.9 mm)  
Back View  
La Crosse Technology, Ltd.  
2809 Losey Blvd. S  
La Crosse, WI 54601  
Phone 608-782-1610  
Table of Contents  
Table of Contents .............................................. 1  
Inventory of Contents ........................................ 2  
Features and Specifications .............................. 2  
Back View.......................................................... 2  
Button View ....................................................... 2  
Install Battery..................................................... 3  
Set the Time and Date....................................... 3  
To Change the Temperature Unit………………………4  
To Set the Time Alarm....................................... 4  
To Use The Alarm ............................................. 4  
Battery Replacement Information ...................... 5  
Mounting the Unit .............................................. 5  
Online Resources.............................................. 5  
Care and Maintenance ...................................... 5  
Troubleshooting................................................. 6  
Warranty Information......................................... 6  
Button View  
Page 1 of 8  
Page 2 of 8  
 
If the “SNZ” button is pressed, the alarm will silence for  
approximately 5 minutes, after which it will begin to  
sound again.  
Immediately remove all low power batteries to avoid  
leakage and damage. Replace only with new batteries  
of the recommended type.  
The alarm uses 3 different patterns of tone, beginning  
gently and increasing in intensity, known as a  
"Crescendo Alarm".  
When cleaning the display and casings, use a soft  
damp cloth only. Do not use solvents or scouring  
agents as they may mark the LCD and casings.  
Do not submerge the unit in water. Furthermore, fix all  
parts in place where the units are adequately protected  
against moisture and rain.  
Battery Replacement Information  
To replace the battery:  
Special care shall be taken when handling a damaged  
LCD display. The liquid crystals can be harmful to  
user's health.  
1. Lift up the battery compartment cover and remove  
the battery.  
Do not make any repair attempts to the unit. Contact  
the La Crosse Technology® Warranty Department for  
help. Opening and tampering with the unit may  
invalidate their guarantee.  
2. Please take note to install the battery with the  
proper polarity as it relates to the battery diagram  
inside the battery compartment (+). The battery  
will fit tightly. To avoid start-up problems please  
ensure that the battery does not spring free.  
3. Replace compartment cover.  
Never touch the exposed electronic circuit of the  
device as there is a danger of electric shock should it  
become exposed.  
Help us to keep our environment clean. Please  
take any used batteries to an authorized depot  
for recycling.  
Do not expose the units to extreme and sudden  
temperature changes, as this may lead to reduce their  
accuracy.  
Mounting the Unit  
Troubleshooting  
Battery:  
The clock can be set on a table or mounted onto a  
wall.  
Battery problems are the single largest cause of  
customer support cases. A few things to check:  
Table Standing  
Use a fresh battery  
An easel type foldout stand is located on the bottom of  
the back side of the clock. Pull the easel out from the  
bottom to open it.  
Please use a plain Alkaline battery that tests no  
less than 1.48 on a voltmeter or with an expiration  
date that is 7 years in the future.  
Wall Mounting  
Ensure correct polarity  
Select a place to mount the clock. Install a mounting  
screw (not included). Align the hanging hole to the  
mounting screw and ensure that the clock locks down  
into place before releasing it.  
Ensure that the clock has a fresh battery and is  
installed using correct polarity as shown inside the  
battery compartment (+).  
Warranty Information  
Online Resources  
La Crosse Technology, Ltd provides a 1-year limited warranty  
on this product against manufacturing defects in materials  
and workmanship.  
Visit the WT-8002 page online at:  
This limited warranty begins on the original date of purchase,  
is valid only on products purchased and used in North  
America and only to the original purchaser of this product. To  
receive warranty service, the purchaser must contact La  
Crosse Technology, Ltd for problem determination and  
service procedures. Warranty service can only be performed  
by a La Crosse Technology, Ltd authorized service center.  
The original dated bill of sale must be presented upon  
request as proof of purchase to La Crosse Technology, Ltd or  
La Crosse Technology, Ltd’s authorized service center.  
Care and Maintenance  
Extreme temperatures, vibration and shock should be  
avoided as these may cause damage to the unit and  
give inaccurate readings.  
Precautions shall be taken when handling batteries.  
Injuries, burns, or property damage may be resulted if  
batteries are in contact with conducting materials,  
heat, corrosive materials or explosives. Batteries  
should be taken out of the unit before it is stored for a  
long period of time.  
La Crosse Technology, Ltd will repair or replace this product,  
at our option and at no charge as stipulated herein, with new  
Page 5 of 8  
Page 6 of 8  
 
or reconditioned parts or products if found to be defective  
during the limited warranty period specified above. All  
replaced parts and products become the property of La  
Crosse Technology, Ltd and must be returned to La Crosse  
Technology, Ltd. Replacement parts and products assume  
the remaining original warranty, or ninety (90) days,  
whichever is longer. La Crosse Technology, Ltd will pay all  
expenses for labor and materials for all repairs covered by  
this warranty. If necessary repairs are not covered by this  
warranty, or if a product is examined which is not in need or  
repair, you will be charged for the repairs or examination.  
The owner must pay any shipping charges incurred in getting  
your La Crosse Technology, Ltd product to a La Crosse  
Technology, Ltd authorized service center. La Crosse  
Technology, Ltd will pay ground return shipping charges to  
the owner of the product to a USA address only.  
All rights reserved. This handbook must not be reproduced in  
any form, even in excerpts, or duplicated or processed using  
electronic, mechanical or chemical procedures without written  
permission of the publisher.  
This handbook may contain mistakes and printing errors.  
The information in this handbook is regularly checked and  
corrections made in the next issue. We accept no liability for  
technical mistakes or printing errors, or their consequences.  
All trademarks and patents are acknowledged.  
Ver.1 / 11-17-09  
Printed in China  
Your La Crosse Technology, Ltd warranty covers all defects  
in material and workmanship with the following specified  
exceptions: (1) damage caused by accident, unreasonable  
use or neglect (including the lack of reasonable and  
necessary maintenance); (2) damage occurring during  
shipment (claims must be presented to the carrier); (3)  
damage to, or deterioration of, any accessory or decorative  
surface; (4) damage resulting from failure to follow  
instructions contained in your owner’s manual; (5) damage  
resulting from the performance of repairs or alterations by  
someone other than an authorized La Crosse Technology,  
Ltd authorized service center; (6) units used for other than  
home use (7) applications and uses that this product was not  
intended or (8) the products inability to receive a signal due to  
any source of interference.. This warranty covers only actual  
defects within the product itself, and does not cover the cost  
of installation or removal from a fixed installation, normal set-  
up or adjustments, claims based on misrepresentation by the  
seller or performance variations resulting from installation-  
related circumstances.  
LA CROSSE TECHNOLOGY, LTD WILL NOT ASSUME  
LIABILITY FOR INCIDENTAL, CONSEQUENTIAL,  
PUNITIVE, OR OTHER SIMILAR DAMAGES ASSOCIATED  
WITH THE OPERATION OR MALFUNCTION OF THIS  
PRODUCT. THIS PRODUCT IS NOT TO BE USED FOR  
MEDICAL PURPOSES OR FOR PUBLIC INFORMATION.  
THIS PRODUCT IS NOT A TOY. KEEP OUT OF  
CHILDREN’S REACH.  
This warranty gives you specific legal rights. You may also  
have other rights specific to your State. Some States do not  
allow the exclusion of consequential or incidental damages  
therefore the above exclusion of limitation may not apply to  
you.  
For warranty work, technical support, or information,  
please contact:  
La Crosse Technology, Ltd  
2817 Losey Blvd. S.  
La Crosse, WI 54601  
Phone: 608.782.1610 Fax: 608.796.1020  
For online contact / support / e-mail:  
For information on other products visit  
Page 7 of 8  
Page 8 of 8  
 

LeapFrog Games MIND MANIA SPELLING CLIP User Manual
LG Electronics Clothes Dryer DLE0442G User Manual
Liebert Power Supply UPS System User Manual
Linksys Network Router WAP54GX User Manual
Logitech Mouse V270 User Manual
Mackie Musical Toy Instrument 16v2 User Manual
Mark Feldstein Assoc Indoor Furnishings TLFC04 User Manual
Master Lock Power Supply MGH3000G User Manual
M Audio Microphone KX TG7200 User Manual
McCulloch Lawn Mower 532 43 30 30 User Manual