Lenoxx Electronics Stereo System SL 6703 User Manual

®
3 CD HOME STEREO  
AM/FM DUAL CASSETTE RECORDER  
WITH REMOTE CONTROL  
MODEL SL-6703  
OPERATING INSTRUCTIONS  
PROGRAMMABLE CD PLAYER WITH REPEAT PLAY  
FLUORESCENT MULTI-COLOR VFD DISPLAY  
INCLUDES MULTI-FUNCTION REMOTE CONTROL  
DIGITAL KARAOKE SYSTEM  
RECEIVES AM/FM STEREO BROADCASTS  
EASY TO OPERATE CONTROLS  
RECORDS FROM CD, TAPE OR RADIO  
DELUXE DYNAMIC SPEAKER SYSTEMS  
PLEASE READ CAREFULLY BEFORE USE  
IB-SL6703(TA)-PRADO-E-091802  
 
ADDITIONAL SAFETY INSTRUCTIONS  
1. Power Sources - The appliance should be connected to a power supply only of the type  
described in the operating instructions or as marked on the appliance.  
2. Wall or Ceiling Mounting - The appliance should not be mounted to a wall or ceiling.  
3. Object and Liquid Entry - Care should be taken so that objects do not fall and liquids  
are not spilled into the enclosure through openings.  
4. Servicing - The user should not attempt to service the appliance beyond that described in  
the operating instructions. All other servicing should be referred to qualified service personnel.  
5. Do not connect FM antenna wire to any outdoor antenna.  
It is the intent of Lenoxx that this product be used in full compliance with the  
copyright laws of the United States and that prior permission be obtained from  
copyright owners whenever recording songs from the RADIO or CD’s.  
Do not apply oil or petroleum products or solvents to any part of this set.  
CAUTION  
Use of controls or adjustments or performance of procedures other than those  
specified herein may result in hazardous radiation exposure.  
This compact disc player is classified as CLASS 1 LASER PRODUCT as stated  
on the bottom of the set.  
2
IB-SL6703(TA)-PRADO-E-091802  
 
CONNECTING THE AC POWER CORD  
Insert one end of the supplied AC power cord into the socket located at the back  
of the set, and the other end to the wall outlet.  
TIP  
If the plug of the AC power  
cord does not match your  
outlet, do not force it.  
Reverse it and try again.  
AC SOCKET The plugs are polarized  
and only fit one way into  
the wall outlet and back of  
the set.  
To a wall outlet  
ATTACHING THE SPEAKERS  
1.Bring one of the speaker  
to the left side of the set.  
2.Carefully unwind one  
piece of the speaker wire  
cord (included), and plug  
one red end into the left  
plug of Speaker Jack L  
(marked “L”), and the black  
end into the left Grounding  
Jack (marked “G”).  
3.Repeat above steps 1 to 2  
for the right side speaker.  
CONNECTING CD/AUX INPUT  
Simply connect the cable’s appropriate end (cable is not included) usually RCA  
JACKS to the CD/AUX INPUT of the set and the mini plug to the AUX OUT jack  
on your CD player.  
YOUR CD PLAYER  
OPTIONAL CABLE (3.5mm)  
TO RCA JACKS  
TO AUX OUT JACK  
TO CD/AUX  
INPUT JACKS  
3
IB-SL6703(TA)-PRADO-E-091802  
 
REMOTE CONTROL  
You can control the CD PLAYER with the provided REMOTE CONTROL (including  
the functions of POWER ON/OFF, MUTE, CONTINUOUS PLAY, DISC CHANGE,  
VOLUME control, CD REPEAT and PLAY features).  
NOTE: When you use the REMOTE CONTROL to operate the CD PLAYER,  
make sure the POWER switch on the main set is turned on, otherwise,  
the REMOTE CONTROL will have no functions to the set.  
1
1. POWER ON/OFF  
2. MUTE  
3. CONTINUOUS PLAY  
4. DISC CHANGE  
10  
2
5. REPEAT - ONE & ALL SONGS  
6. VOLUME UP/DOWN  
7. SKIP BACKWARD  
8. SKIP FORWARD  
9. STOP/PROGRAM  
10. PLAY/PAUSE  
9
3
4
8
NOTE: When you press the POWER  
ON/OFF switch to shut the set  
off, the VFD display will go out,  
and the STANDBY indicator on  
the main set will turn on.  
5
7
6
Slide the battery cover to remove. Insert 2 size “AAA” batteries correctly so that  
the + and - polarities match the polarity diagrams inside the battery compartment.  
NOTE:  
About half a year of normal operation can be expected when using the  
alkaline batteries.  
when the batteries are exhausted, the remote control will no longer  
operate the system. Replace both batteries with new ones.  
When the remote control is not to be used for a long time (2 months or  
more), remove the batteries to avoid possible damage that may be caused  
by battery leakage.  
Avoid keeping the remote control in extremely hot or humid locations.  
The remote control’s operating distance is about 0.2m (8 inches) to 6m  
(20 feet) away from the remote sensor.  
4
IB-SL6703(TA)-PRADO-E-091802  
 
PLAYING A CD  
4
3&5  
6
1
2
7
Connect the supplied AC power cord (see page 3).  
Press the POWER switch, the VFD  
display will turn on.  
1
2
Slide the FUNCTION switch to CD position,  
the disc tray will be automatically set to DISC  
1 position and read the disc on it, “ ” will  
show on the VFD display.  
Open the CD DOOR by pressing the OPEN/CLOSE  
button and place the CD in the NO.1 disc compartment.  
The label side of the CD should face upward.  
3
Press the DISC CHANGE button to revolve the tray  
clockwise. Place other disc(s) on the disk holder(s).  
4
5
Close the CD DOOR by pushing the OPEN/  
CLOSE button. The corressponding dics  
number indicator will be on and the display  
will show the corresponding dics number,  
such as “  
”, “ ” or “  
”.  
Press the CD PLAY button. The player will play  
all the 3 discs continuously, “ ” will show  
steadily on the VFD. The corresponding disc  
indicator will flash, and the display will show the  
track number of current playing.  
6
7
You may rotate the TONE control counterclockwise to  
intensify bass, and clockwise to intensify the treble.  
TIP:  
” WILL SHOW IN THE DISPLAY IF THERE IS NO DISC IN THE CD  
COMPARTMENT OR IF THE DISC IS UPSIDE DOWN.  
5
IB-SL6703(TA)-PRADO-E-091802  
 
USE THESE BUTTONS FOR  
ADDITIONAL OPERATIONS  
DISC buttons  
DISC CHANGE  
TIP  
When CD play is  
paused,  
will  
flash and no music  
will play.  
FUNCTION SWITCH  
VOLUME CONTROL  
To  
Press or Adjust  
Adjust the volume  
VOLUME control  
Stop playback  
STOP  
To resume play,  
press the PAUSE  
PLAY/PAUSE  
” will flash during pause.  
Press again to resume play  
after pause.  
Pause playback  
button again,  
will stop flashing  
and music will play.  
Go to the next track  
FORWARDS  
BACKWARDS  
TIP  
Go back to the previous  
track  
If you bump the set  
or the table it is  
sitting on, during CD  
play, the music will  
stop or skip for a few  
seconds. This is  
normal for this type  
of player.  
or  
Locate a point in a song  
Press and hold down while  
playing until you find the  
point.  
Press DISC CHANGE, or  
press the DISC button  
(DISC 1, DISC 2 or DISC 3)  
directly.  
Change the discs  
TIP  
This set has an  
electronic volume  
control, you may  
raise or lower the  
volume by pressing  
the VOLUME UP and  
DOWM buttons.  
Cancel 3 discs continuously  
playing function.  
Press  
on the REMOTE.  
Press OPEN/CLOSE (press  
STOP first).  
Remove the CD  
To turn off the sound  
instantly  
Press the MUTE button on  
the REMOTE.  
Press the POWER switch, the  
display will go off.  
Turn off the power  
6
IB-SL6703(TA)-PRADO-E-091802  
 
REPEAT PLAY  
PLAYING CD SONGS (TRACKS) OVER AND OVER  
You can play CD tracks over and over in normal or programmed play modes (see  
page 8).  
REPEAT  
POWER SWITCH  
FUNCTION SWITCH  
1. Press the POWER switch, the display will light up.  
2. Set the FUNCTION switch to CD position.  
3. Select the track by pressing  
or  
, and then press  
.
4. Press the CD REPEAT button.  
To repeat  
Display shows  
Press  
a single track (song)  
Press the REPEAT  
button once  
“REP” will flash.  
Press the REPEAT  
button twice  
“REP” will be  
steady on  
all the tracks (all songs)  
programmed tracks  
During programmed play,  
press the REPEAT  
button twice  
“REP” is steady  
on  
To cancel Repeat Play  
Press the REPEAT button until the “REP” goes off.  
7
IB-SL6703(TA)-PRADO-E-091802  
 
PROGRAMMED CD PLAY  
SELECTING YOUR OWN MUSIC PLAYING ORDER  
You can make a program of up to 15 tracks  
to play in the order you want them to be  
played.  
NOTE: Programming is only done during  
stop mode.  
PROGRAM  
During STOP mode, press the  
PROGRAM button. “PRG.” will  
flash in the display.  
1
2
3
Press the SKIP/SEARCH buttons  
either  
or  
until the desired  
track shows in the display.  
Press the PROGRAM button to  
confirm, “PRG.” will flash in the  
display.  
Repeat steps 2&3 until all the  
desired tracks are programmed.  
4
5
Press the PLAY button to start  
programmed play. “  
” , “PRG.”  
and the track number being  
played will show in the display.  
To change the current program  
Just create a new program following the programing procedure.  
To cancel Program Play  
Press the STOP button on the main set or STOP/PROGRAM button on the REMOTE  
control twice, “PRG.” will disappear from the display.  
8
IB-SL6703(TA)-PRADO-E-091802  
 
LISTENING TO THE RADIO  
1
FM MODE  
4
2
3
6
Connect the supplied AC power cord (see page 3).  
Press the POWER switch, the VFD  
display will turn on.  
1
2
Set the FUNCTION switch to  
RADIO position.  
Set the BAND switch to the proper  
band position (AM or FM), and set  
the FM MODE switch to STEREO  
or MONO.  
3
4
Tune into the station you prefer  
using the TUNING control. Adjust  
for the clearest sound.  
This indicator will light up when  
receiving FM Stereo broadcasts.  
5
6
You may rotate the TONE control  
counterclockwise to intensify bass,  
and clockwise to intensify the treble.  
9
IB-SL6703(TA)-PRADO-E-091802  
 
USE THESE BUTTONS FOR  
ADDITIONAL OPERATIONS  
FM MODE FUNCTION  
VOLUME  
TIP  
To  
Press or Set  
If the FM broadcast is  
noisy, set the FM MODE Adjust the volume  
switch from STEREO  
to MONO.  
VOLUME control (UP or  
DOWN).  
Set the FUNCTION switch  
to TAPE position or press  
the POWER switch.  
Turn off the Radio  
This set has an  
electronic  
volume  
control, you may raise  
or lower the volume by  
pressing the VOLUME  
The AM antenna is  
magnetic bar within the  
system. Change position  
of the set for the best AM  
reception.  
To improve AM broadcast  
reception  
UP  
and  
DOWN  
buttons.  
Unwrap and fully extend  
the FM antenna for the  
best FM reception.  
To improve FM broadcast  
reception  
FM ANTENNA  
Press the MUTE button on  
the REMOTE.  
To turn off the sound  
instantly  
10  
IB-SL6703(TA)-PRADO-E-091802  
 
PLAYING A TAPE  
1
3
4
2
Connect the supplied AC power cord (see page 3).  
Press the POWER switch, the VFD  
display will turn on.  
1
2
FU LL  
REEL  
EM PTY  
REEL  
Set the FUNCTION  
switch to TAPE position.  
A
Press the STOP/EJECT  
INSERT THIS WAY  
button (DECK  
A
or  
3
DECK B) to open the  
tape compartment and  
insert a recorded tape.  
Close the door.  
STOP/EJECT  
Press the PLAY button.  
The player turns on and  
starts playing.  
4
5
PLAY  
When the set finishes  
playing one side of the  
tape, the set will stop. To  
hear the other side of the  
tape, flip the tape over,  
then insert and press  
PLAY.  
AUTO STOP  
11  
IB-SL6703(TA)-PRADO-E-091802  
 
RELAY PLAY  
1
5
2
4
3
Connect the supplied AC power cord (see page 3).  
To play tapes in DECK A and then DECK B, follow the steps below:  
Press the POWER switch, the VFD  
1
display will turn on.  
Set the FUNCTION switch to TAPE  
position.  
2
Press the cassette PLAY button on  
DECK A, DECK A will play.  
3
PLAY  
Press the cassette PAUSE button on  
DECK B.  
4
PAUSE  
Press the cassette PLAY button on  
DECK B. When DECK A finishes playing,  
DECK B will start playing automatically.  
5
PLAY  
When the tape finishes playing on DECK  
B, the set will stop.  
6
12  
IB-SL6703(TA)-PRADO-E-091802  
 
USE THESE BUTTONS FOR ADDITIONAL  
CASSETTE TAPE OPERATIONS  
VOLUME  
CONTROL  
PAUSE  
PAUSE PLAY  
STOP/EJECT  
PLAY  
RECORD  
REWIND & FAST F.  
PHONES JACK  
STOP/EJECT  
REWIND & FAST F.  
To  
Press or Adjust  
Press the VOLUME button ( UP  
or DOWN)  
Adjust the volume  
Stop playback  
STOP/EJECT button  
FAST FORWARD button or  
REWIND button  
Fast forward or rewind  
the tape  
PAUSE button  
Press again to resume play after pause.  
Pause playback  
Eject the cassette  
STOP/EJECT button  
To enjoy the music  
without disturbing others  
(headphones are not  
included)  
Insert your headphone plug into  
the PHONES jack  
To shut power off  
Make sure cassette buttons are all  
up (stop) and POWER switch is off.  
13  
IB-SL6703(TA)-PRADO-E-091802  
 
RECORDING ON A TAPE  
1
4
MICROPHONE JACK  
3 2  
5
Connect the supplied AC power cord (see page 3).  
Press the POWER switch, the VFD  
display will turn on.  
1
2
OK  
NO  
Press the STOP/EJECT button (DECK  
B) to open the tape compartment and  
insert a blank tape. Select the program  
source (MW, FM, CD, or microphone)  
you want to record.  
STOP/EJECT  
To record from the CD player, set the FUNCTION switch to  
CD position, insert a CD and follow the steps to play a CD  
(see page 5).  
3
To record from a radio, set the FUNCTION switch to RADIO  
position, and tune into the station you want (see page 9).  
To record from the microphone, set the FUNCTION switch to  
the TAPE position, and plug the microphone (not included)  
into the MIC JACK. Speak into the microphone.  
To record from the DECK A, set the FUNCTION switch to the  
TAPE position, and follow the steps to play a TAPE (see  
page 11).  
Press the RECORD button to start recording. (The PLAY  
button is depressed automatically.)  
4
5
RECORD  
To hear what you recorded, set the FUNCTION switch to  
TAPE position, then press REWIND and PLAY.  
REWIND PLAY  
14  
IB-SL6703(TA)-PRADO-E-091802  
 
USE THESE BUTTONS FOR  
ADDITIONAL OPERATIONS  
TIP  
To  
erase  
a
DUBBING SPEED  
SWITCH  
STOP/EJECT  
PAUSE  
recording, just start  
a new recording,  
and the old one is  
a u t o m a t i c a l l y  
replaced.  
Press or Set  
To  
Stop recording  
STOP/EJECT button  
see page 19 for  
notes on cassettes.  
Pause recording  
PAUSE button  
Press the button again  
to resume recording.  
Adjust recording speed  
when copying tapes  
DUBBING SPEED  
switch from NORMAL  
to HIGH speed.  
Turn off the power  
Press the STOP/EJECT  
button and press the  
POWER switch, the VFD  
display will go off.  
15  
IB-SL6703(TA)-PRADO-E-091802  
 
SINGING ALONG WITH KARAOKE FUNCTION  
MICROPHONE JACK  
VOLUME  
2
Connect the supplied AC power cord (see page 3).  
Insert microphone plug into the microphone jack.  
To avoid mic howling, lower the volume level setting  
first.  
1
2
NOTE: Microphone is not included, you may  
purchase a microphone where you bought  
this set.  
To sing along with the CD player, set the FUNCTION  
switch to CD position, insert a KARAOKE CD disc  
and follow the steps to play a CD (see page 5).  
To sing along with the tape, set the FUNCTION  
switch to the TAPE position, insert a KARAOKE  
TAPE into deck A or B, and follow the steps to  
play a TAPE (see page 11).  
Press the CD PLAY/PAUSE button on the CD player  
or press the PLAY button on deck A or B.  
3
4
PLAY  
Adjust the volume controls (UP or DOWN) to achieve  
the best effect.  
16  
IB-SL6703(TA)-PRADO-E-091802  
 
USE THESE BUTTONS FOR ADDITIONAL  
OPERATIONS  
TONE  
VOLUME  
CONTROL  
To  
Press or Adjust  
Adjust the MIC volume  
VOLUME control  
Adjust the CD or TAPE  
music volume  
VOLUME control  
Rotate the TONE  
control  
counterclockwise  
Intensify bass  
Intensify treble  
Rotate the TONE  
control clockwise  
TIP: If there is squealing or howling (feedback) noise during KARAOKE  
use, move the microphone away from the speakers or turn down  
the volume.  
17  
IB-SL6703(TA)-PRADO-E-091802  
 
PRECAUTIONS  
On Safety  
On Operation  
As the laser beam used in the CD  
If the set is brought directly from a  
player section may be harmful to the  
eyes, do not attempt to disassemble  
cold to a warm location, or is placed  
in a very damp room, moisture may  
condense on the lens inside the CD  
player section. Should this occur, the  
set will not operate properly. In  
this case, remove the CD and wait  
about an hour for the moisture to  
evaporate. If the set has not been  
used for a long time, set it in the  
playback mode to warm it up for a few  
minutes before inserting a cassette.  
the cabinet.  
Refer servicing to  
qualified personnel only.  
Should any solid object or liquid fall  
into the set, unplug the player, and  
have it checked by qualified personnel  
before operating it any further.  
On Placement  
This set is designed to be played on  
Do not leave the set in a location  
a stable no vibration position. If you  
bump the set during CD play, the music  
will stop or skip for a few seconds.  
This is normal for this type of player.  
near a heat source, or in a place  
subject to direct sunlight, excessive  
dust or mechanical shock.  
Do not place the set on an inclined  
or unstable place.  
Do not place anything within 1 inch of  
the back of the cabinet. The  
ventilation holes must not be covered  
for the set to operate properly and  
prolong the life of its components.  
If the set is left in a car parked in the  
sun, be sure to choose a location in  
the car where the set will not be  
subjected to the direct rays of the  
sun.  
Since a strong magnet is used for the  
speakers, keep personal credit cards  
using magnetic coding or springwound  
watches away from the speakers to  
prevent possible damage from the  
magnets.  
18  
IB-SL6703(TA)-PRADO-E-091802  
 
PRECAUTIONS (continued)  
Notes on CDs  
Notes on Cassettes  
Break off the cassette recording tabs  
Before playing, clean the CD with a  
from side A or B to prevent accidental  
recording.  
cleaning cloth. Wipe the CD from the  
center out.  
Side A  
Do not use solvents such as benzene,  
Tab for side A  
Tab for side B  
thinner, commercially available  
cleaners or anti-static spray intended  
for vinyl LPs.  
Do not expose the CD to direct  
sunlight or heat sources such as hot  
air ducts, nor leave it in a car parked  
in direct sunlight as there can be a  
considerable rise in temperature inside  
the car and result in a damaged CD.  
To record on a tape with its tab broken  
off, cover the respective tab hole for  
side A or B with adhesive tape.  
Use of a cassette with more than 90  
minutes, such as C-120 (120  
minutes), is not recommended. The  
extreme thinness of this tape may  
damage this set.  
Do not stick paper or stickers on the  
CD, nor scratch the CD.  
After playing, store the CD in its case.  
To reduce the chances of tape  
If there is a scratch, dirt or fingerprints  
on the CD, it may cause a tracking  
error or skipping.  
jamming or tangling, you should check  
that there are no loose layers of tape  
visible through the cassette center  
window. If any, tighten these loose  
layers of tape using a pencil before  
inserting the cassette into the set.  
19  
IB-SL6703(TA)-PRADO-E-091802  
 
MAINTENANCE  
Cleaning the Tape Heads Notes for Storing  
Wipe the heads, the pinch roller and  
the capstan with a cleaning swab slightly  
Cassette Tapes  
1. Do not put a tape near a magnetic  
moistened with cleaning fluid or alcohol  
after every 10 hours of operation for  
optimum playback and recording quality.  
After cleaning, insert a tape when the  
areas cleaned are completely dry.  
field, such as a TV, or speaker.  
Magnetic fields may reduce the tape  
sensitivity or even erase the  
recording.  
2. Do not store tape for any length of  
time in a hot, moist or dusty place.  
COTTON SWAB  
CAPSTAN  
PINCH ROLLER  
ERASE HEAD  
RECORD/PLAY BACK HEAD  
NOTE: In order to see and clean the  
head, you may have to press  
PLAY first.  
Cleaning the Cabinet  
Clean the cabinet, panel and controls  
with a soft cloth slightly moistened with  
water or a mild detergent solution. Do  
not use any type of abrasive pad,  
scouring powder, or solvent, such as  
alcohol or benzene.  
20  
IB-SL6703(TA)-PRADO-E-091802  
 
TROUBLE SHOOTING  
Problem  
Remedy  
Connect the AC power cord to a wall outlet securely.  
The power is not on  
Make sure the FUNCTION switch is at the right  
position as you want.  
Adjust the volume.  
Unplug the headphones when listening through  
speakers.  
Check the speaker cord connections.  
Press the MUTE button on the REMOTE to make sure  
the sound is not muted.  
There is no sound  
Press the POWER switch, the VFD display only  
lights up when the AC power is ON.  
VFD display does not light up  
” appears in the display even  
Insert the CD with the label side up.  
when a CD is in place  
Make sure that the CD compartment is closed.  
Place the CDs with the label side up.  
Clean the CDs.  
Take out the CDs and leave the CD DOOR open  
for about an hour to dry moisture condensation.  
Make sure the FUNCTION switch is at CD position.  
CD does not play  
Clean the CDs, or replace it if the CDs are badly  
damaged.  
Place the player in a location free from vibration.  
The sound drops out  
CD does not play while radio  
may continue to play  
It is normal since the radio uses less power than the  
CD player.  
AM sound is weak or has poor  
quality  
Change the position of the set for better AM reception.  
Unwrap and stretch out the FM ANTENNA for better  
FM reception.  
FM is weak  
Make sure the safety tab on the cassette is in place  
(see page 19).  
Make sure the FUNCTION switch is at TAPE position.  
The RECORD button does not  
function/The tape does not play  
The tape does not erase  
completely  
Clean the erasing head (see page 20).  
Make sure the tape is inserted properly.  
Make sure the safety tab of the cassette is in place.  
The tape does not record  
The sound is weak/The sound  
quality is poor  
Clean the heads, pinch roller and capstan (see page  
20).  
The tape has reached its end. Remove it, flip it to the  
other side and re-insert.  
Cassette PLAY button pops up  
Use only better quality tapes.  
Do not use a cassette with more than 90 minutes.  
Make sure there are no loose layers of tape visible  
before inserting the cassette.  
Tape jamming or tangling  
21  
IB-SL6703(TA)-PRADO-E-091802  
 
SPECIFICATION  
General Description  
Power source:  
AC 120V, 60Hz 28Watts  
DC 2 size “AAA” batteries for Remote Control  
(Alkaline batteries are recommended)  
Speakers (2 ways): 2 - 54 ohm woofers  
and 2 - 34 ohm tweeters with crossover  
Output power:  
Dimensions:  
5.0W/channel  
Unit  
Speaker Box  
1
Width: 11”  
Depth: 18  
Height: 12  
Width: 8 / ”  
8
15  
13  
1
Depth: 11 / ”  
8
/
16  
/
13  
Height: 12  
/
16  
16  
Weight: 10LBs  
Weight: 3.3LBs  
CD Section  
Any normal CD used in portable players  
760 - 800 NM  
Plays disc type:  
Laser wavelength:  
Tracking method:  
Frequency response:  
3 - spot error detection  
50Hz - 15kHz +1/-2 dB  
3.86 mm lens  
NOTE: This CD player will only play NORMAL music CDs (or CD-R CDs).  
This set will not play CDRW encoded discs.  
Tape Recorder Section  
Frequency response: Standard normal bias cassette tape,  
70Hz - 10kHz  
Radio Section  
Frequency range:  
FM: 88 - 108 MHz  
AM: 530 - 1700 kHz  
LENOXX reserves the right to make design and specification changes for  
product improvement.  
PROTECT YOUR FINE FURNITURE!  
WE RECOMMEND A CLOTH OR OTHER PROTECTIVE MATERIAL BE PLACED  
UNDER THE SET WHEN PLACING IT ON SURFACE WITH A NATURAL OR  
LACQUER FINISH.  
22  
IB-SL6703(TA)-PRADO-E-091802  
 
LIMITED WARRANTY  
We warrant this product to be free from defects in material and workmanship  
under normal use for a period of 90 days after purchase and we will repair it  
free of charge or replace it at no charge, should it become defective under  
this warranty, providing you submit proof of purchase (sales slip) with the set.  
During the initial 90 day period after original purchase, we will service or  
exchange, at no charge, the set that is returned to LENOXX ELECTRONICS  
CORP. After the initial 90 day period expires, and for a period of 12 months  
from original purchase, we will repair the unit covering any part(s) that need to  
be replaced at no charge, but will charge for the cost of labor, return postage  
paid by Lenoxx.  
This warranty does not apply to any products which have been subject to  
misuse, neglect or accident. This warranty does not cover broken cabinet.  
UNDER NO CIRCUMSTANCES WILL LENOXX ELECTRONICS CORP. BE  
LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES. Some  
states do not allow the exclusion or limitation of incidental or consequential  
damages, so the above limitations or exclusions may not apply to you.  
This warranty gives you specific legal rights, and you may also have other  
rights which vary from state to state. The following charges apply to repairs  
beyond the warranty period: $50.00. Be sure to pack carefully and return  
postage paid insured together with your money order (personal checks will  
not be accepted) and sales receipt to :  
LENOXX ELECTRONICS CORP. 2 GERMAK DRIVE, CARTERET N.J. 07008  
For customer service  
Dial 1-800-315-5885  
(MONDAY - THURSDAY 9:00 AM - 5:00 PM, FRIDAY 9:00 AM - 1:00 PM EST)  
or Visit Our Website: http://www.lenoxx.com  
© 2002 LENOXX ELECTRONICS CORP.  
2 GERMAK DRIVE  
CARTERET, N.J. 07008  
MADE & PRINTED IN CHINA  
23  
IB-SL6703(TA)-PRADO-E-091802  
 

Kyocera Printer Accessories FS 6970DN User Manual
Lasko Fan 2511 User Manual
Life Fitness Elliptical Trainer CT9500 User Manual
Magnavox Flat Panel Television 52MF438B F7 User Manual
Makita Impact Driver BTD130FW User Manual
Marmitek Stereo Receiver VideoControl3 User Manual
M Audio Electronic Keyboard MID0127GM User Manual
Maytag Ventilation Hood UXT5230AY User Manual
Melissa Microwave Oven 753 084 User Manual
Mellerware Juicer 26105 User Manual