Signature Adjustable Decline Bench
Owners Manual
FOUND ON THE FRAME
FOUND AT MOVING PARTS
Signature Adjustable Decline Bench
Safety & Warranty
WARRANTY
WHAT IS COVERED
This Life Fitness commercial exercise equipment (Signature Benches and Racks) is warranted to be free of all defects in material and workmanship to the
original purchaser for the specific items and duration listed:
O
10 years on structural frame
O
1 year on bearings
O
1 year on grips
O
1 year on cables and belts (if so equipped)
O
1 year for rust or corrosion of structural frame. Scratches or scrapes where the subsurface of the unit has been exposed must have been properly
repaired by the customer.
O
90 days on upholstery and any items not specified.
Life Fitness will ship to you at our expense, any repair parts covered by the warranty as stated. If the Product is deemed not repairable by Life Fitness
authorized personnel, we reserve the right to replace any or all of the Product at our option within the stated warranty period.
WHAT IS NOT COVERED
Any failures or damage caused by unauthorized service, misuse, accident, negligence, improper assembly or installation, debris resulting from any
construction activities in the Products location, alterations or modifications without written authorization by Life Fitness, or by failure on your part to use,
operate, and maintain the Product as set out in your Operation Manual (.Manual.). All terms of this warranty are void if this product is moved beyond the
continental borders of North America (excluding Hawaii) and are then subject to the terms provided by that country's authorized Life Fitness
Representative.
TRANSPORTATION & INSURANCE FOR SERVICE
If the Product or any covered part must be returned to a service facility for repairs, We, Life Fitness, will pay all transportation and insurance charges for
the first year. You are responsible for transportation and insurance charges for year 2 and beyond.
HOW TO GET PARTS & SERVICE
Simply call Customer Support Services at (800) 351-3737 or (847) 451-0036, Monday through Friday from 8:00 a.m. to 6:00 p.m. Central Standard Time,
and tell them your name, address and the serial number of your Product. They will tell you how to get a replacement part, or, if necessary, arrange for
service where your Product is located or advise you on how and where to ship the Product for service. Before shipping:
1. Obtain a Return Authorization Number (RA#) from Customer Support Services
2. Securely pack your Product (use the original shipping carton, if possible)
3. Write the RA# on the outside of the carton
4. Insure the Product, and
5. Include a letter explaining the defect or problem and a copy of your proof of purchase if you believe the service is covered by warranty
Life Fitness World Headquarters
Attn: CSS Help Desk
5100 N. River Rd.
Schiller Park, IL. 60176
EXCLUSIVE WARRANTY
THIS LIMITED WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES OF ANY KIND EITHER EXPRESSED OR IMPLIED, INCLUDING BUT NOT LIMITED TO
THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, AND ALL OTHER OBLIGATIONS OR LIABILITIES ON
OUR PART. We neither assume nor authorize any person to assure for us any other obligation or liability concerning the sale of this Product. Under no cir-
cumstances shall we be liable under this warranty, or otherwise, of any damage to any person or property, including any lost profits or lost savings, for
any special, indirect, secondary, incidental or consequential damages of any nature arising out of the use of or inability to use this Product. Some states
do not allow the exclusion or limitation of implied warranties or of liability for incidental or consequential damages, so the above limitations or exclusions
may not apply to you.
CHANGES IN WARRANTY NOT AUTHORIZED
No one is authorized to change, modify or extend the terms of this limited warranty.
EFFECT OF STATE LAWS
This warranty gives you specific legal rights and you may have other rights, which vary, from state to state.
OUR PLEDGE TO YOU
Our Products are designed and manufactured to the highest standards.
We want you completely satisfied with our Products and will do everything possible under the terms of this warranty to keep you secure in knowing you
have bought the best!
Signature Adjustable Decline Bench
Assembly Instructions
Item
Qty
Description
Part Number
1
2
4
4
Roller Pad
74247XX
7322301
3256202
7308701
78219XX
78218XX
82374XX
3256204
3102514
82390XX
82377XX
3242002
82463XX
8239501
8140101
3256205
8140201
3237403
8137801
Fender Washer
M10 X 25mm Bolt
Roller Pad Cap
Head Pad
3
10
4
4
5
1
6
1
Back Pad
7
1
Back Frame
8
5
M10 X 35mm Bolt
3/8” SAE Washer
Base Support Frame
Base Frame
9
13
1
10
11
12
13
14
15
16
17
18
19
1
2
M10 Nylock Nut
Seat Adj. Assembly
Pivot Shaft
1
2
1
Adj. Pivot Shaft
M10 X 40mm Bolt
Adj. Pivot Spacer
1” Hole Plug
2
2
7
1
Warning Sheet
Tools Required:
O
17mm Wrench
O
Metric Allen Wrench Set
Ratchet with 17mm Socket
Ratchet Extension
O
O
1. Slide one ROLLER PAD (1) onto one PAD SHAFT (A) until it contacts the
pre-installed SHAFT COLLAR (B). Secure the ROLLER PAD using one
FENDER WASHER (2) and one M10 X 25mm BOLT (3) as shown. Tighten
the BOLT securely. Insert one ROLLER PAD CAP (4) onto the ROLLER PAD
as shown.
Repeat this procedure to install the remaining ROLLER PADS onto the
remaining PAD SHAFTS.
2. Attach the HEAD PAD (5) and BACK PAD (6) to the BACK FRAME (7) using
five M10 X 35mm BOLTS (8) and five 3/8" SAE WASHERS (9). Tighten all
BOLTS securely.
3. Assemble the BASE SUPPORT FRAME (10) to the BASE FRAME (11) using
two M10 X 25mm BOLTS (3), four 3/8" SAE WASHERS (9) and two M10
NYLOCK NUTS (12) as shown. Tighten all BOLTS and NUTS securely.
4. Assemble the SEAT ADJUSTMENT ASSEMBLY (13) to the BASE FRAME
(11) using one PIVOT SHAFT (14). Secure the PIVOT SHAFT using two M10
X 25mm BOLTS (3) and two 3/8" SAE WASHERS (9) as shown. Tighten the
BOLTS securely.
Signature Adjustable Decline Bench
5. Assemble the SEAT ADJUSTMENT ASSEMBLY (13) to the BACK FRAME
(7) using the ADJUSTMENT PIVOT SHAFT (15). Secure the ADJUSTMENT
PIVOT SHAFT using two M10 X 40mm BOLTS (16) and two ADJUSTMENT
PIVOT SPACERS (17) as shown. Tighten the BOLTS securely.
6. Attach the BACK FRAME (7) to the BASE FRAME (11) using the one PIVOT
SHAFT (14). Secure the PIVOT SHAFT using two M10 X 25mm BOLTS (3)
and two 3/8" SAE WASHERS (9) as shown. Tighten the BOLTS securely.
7. Install 1" HOLE PLUGS (18) into all open bolt holes.
©
2007 Life Fitness, a division of Brunswick Corporation. All rights reserved.
Life Fitness is a registered trademark of Brunswick Corporation.
SADB 1/12/07
8183801 RevA-1
|