Lytecaster® Recessed Downlighting 1100AICM
Page ꢀ of ꢀ
6 3/4” Aperture Incandescent Insulated Ceiling, AirSeal® Frame-In Kit
Downlighting
0194
ꢀ5 ꢀ/2"
1
7
3
7 5/ꢀ6"
FRAME-IN KIT
2
4
9"
ꢀꢀ ꢀ/8"
5
6
REFLECTOR TRIM
6 ꢀ3/ꢀ6" Dia.
Ceiling Opening
Complete Fixture consists CoofmRpeleftleeFcixtoturreTcroimnsi&stsForfaRmEFeL6-EICnTKORitTR. ISMe&leFcRtAMeaE-cINh-KsIeTp. Saerlaetcet leya.ch separately.
Frame-In Kit Reflector Trims — See Individual Reflector Trim Specification Sheets
Open Downlight
Adjustable
Enclosed Open Wet
Diffusers Location
Wall
Washer
Reflector
Satin
Cone
Sloped
Ceiling
Baffles
Basic
White
Cross Recessed
Blade Line Volt.
Recessed
Low Volt.
1143
1108
1131
1105
1170M1 1132
1171
1129NM
1129
1155
1155WH
1161
1121
1184CD
1184WH
1185
1100AICM
1144
1108NM 1131WH 1105WH
1124
1186
1144CD
1110
1131GD 1105NM
1129CD
1126
1186WH
1110NM 1131CL
1105BNM
1129CDNM 1161WH
1128
1131BK 1176
1133
1129WH
1129CL
1129GD
1129BK
1163
1164
1134
Cone:
1176WH
1177SH
1178SH
1190
1133WH 1179M1
1133GD 1179WH
1133CL
1112
1112NM
1113
1113BK
1113WH
1113CD
1113NM
1113BKNM
1113CDNM
1133BK
Eyeball
1154
1154WH
1122
1154BK
1123
1154GD
1182
1154CL
1122WH
1123WH
1154CD
Features
Labels
1. Housing: 0.026” galvanized steel. UL listed for direct contact with thermal
insulation. AirSeal® housing minimizes air leakage to less than 2 CFM at
ꢀ.57 PSF, which complies with Model Energy Code (Section 602.3.3) and the
Washington State Energy Code (Section 502.4) and reduces heat loss and
condensation in ceiling. Access door for inspection of junction box.
2. Mounting Frame: 0.036 (#20 ga.) galvanized steel. Accommodates all
ceilings up to ꢀ” thick. 3/8” deep integral lip. Four slots are positioned 90°
apart to simplify alignment. Push-in/twist-out rotoclips hold reflector flush
to ceiling.
UL Type I.C. (Suitable for Damp Locations);
Complies with Air Leakage Requirements as stated in the Model Energy Code,
California Title 24 and the Washington State Energy Code.
AirSeal® is a registered trademark of Lightolier
Romex® is a registered trademark of General Cable Industries Inc.
US Patent Numbers: 5,045,985; 4,751,624
3. Junction Box: 2” X 4” X 4”: 0.063” (#ꢀ4 ga.) galvanized steel. UL listed for
maximum of 6 No. ꢀ2 ga., 90° C through branch circuit conductors. Quick
release “L” shaped cover for outside access to wiring. Access door inside
of housing allows easy inspection of wiring without removal of housing.
Integral cable clamps permit attachment of nonmetallic Romex® or armored
cable without the need for additional connectors.
Job Information
Type:
Job Name:
Cat. No.:
4. Mounting Bars: 0.059” (#ꢀ6 ga.) galvanized steel. ꢀ3” long bars extend to
27”, rotatable and lockable, with integral T-bar tabs. Attach to wood joist or
T-bar ceilings without need of accessories.
5. Socket Housing: Impact extruded aluminum or galvanized steel.
6. Socket: Porcelain medium base; nickel plated screw shell. Pre-wired with
#ꢀ8 ga. SFꢀ leads to junction box.
Lamp(s):
Notes:
7. Thermal Protector: Meets NEC and UL requirements. Located inside
housing.
Lightolier a Genlyte company
Options & Accessories
63ꢀ Airport Road, Fall River, MA 02720 • (508) 679-8ꢀ3ꢀ • Fax (508) 674-47ꢀ0
We reserve the right to change details of design, materials and finish.
© 2006 Genlyte Group LLC • D0906
Mounting Bars: 1976 - ꢀ3” set of (4).
Extra-Thick Ceiling Mounting Ring: 1967A - up to 2” thick ceilings
|