P R O D U C T D ATA S H E E T
HANDSET
HB40
Features:
• Handset for up to 4 actuators
• Only control current, max. 100 mA per channel
in the handset
• High-strength plastic housing
• Ergonomic design and easy-touch buttons
• Hook for easy placement
• 2.5 m straight cable
• Protection class: IP51. (HB44H for CARELINE IP54)
• Colour: black
Options:
• Protection class: IP65 or IP66 (Not HB40A)
• 0.5m/0.6m coiled cable or with extra long cable -
see ordering example
• Customised front cover
• Anti-slip rubber tip for placement on a flat surface
(special article)
• Colour: grey
Usage:
• Ambient temperature: +5º to +40° C
• HB40 is compatible with CB8-T, CB9..AX (not
CH.4), CB12 and CB18
• HB40A is compatible with CB8-A battery version.
Fitted with plug for battery charger CH08.
• HB40E is compatible with CB9Px (except CB9..
PM/PN) and CB14
• HB44H is only compatible with CB9..Ax (if CH.4)
4 channels
• HB40T is only compatible with CB7 (max. 2
channels)
The HB40 series handsets are designed for use
with LINAK® control boxes.
These sturdy compact units are ergonomically
designed and ideal for a vast range of applica-
tions from patient care beds and office furni-
ture to industrial and agricultural duties.
HB40
Ordering example:
H B 4 1 0 0 0 - 0 0 0 0 0 0
Black
Grey
Cable:
0015751
0015752
0 = 2500 mm, 9-Wire straight, 8 p. DIN plug
1 = 600 mm, 9-Wire coiled, 8-p. DIN plug
(HB43 and HB44)
00914519
0015761
00914517
0015763
0015114
00914520
0015762
00914518
0015764
2 = 500 mm , 6-Wire coiled, 8-p. DIN plug
(only HB41x, HB42x and HB43E)
3 = 500 mm , 6-Wire coiled, without plug
(only HB41 and HB42)
0015119
0015766
0015422
0015150
0015767
4 = 500 mm , 4-Wire coiled, 4p. Modular plug
(only HB41)
5 = 600 mm , 9-Wire coiled, 8p. DIN, extra long
straight end
9 = 600 mm , 5-Wire coiled, 8p. Modular plug.
(only CB7)
0 = IP51
IP - rating:
1 = IP65
2 = IP66-Washable
4 = IP54
Note: for HB4xA: IP 21
0 = black
1 = grey
Colour:
customer designed front cover
Front cover no:
Special code:
Functionality:
if not 00
0 = HB40-like
A = for use with CB8-A, (only HB41/42/43)
E = Matrix for use with CB14, CB9..Px (not CB9..PM/PN)
H = for use with CB9
T = for use with CB7 (only HB41/42)
1 - 4
No. of rows:
Choice of rubber tip to be specified separately (special article).
Overview for HB4x functionality: 0, A, E, H, T.
HB41 0/A/E/H/T
HB42 0/A/E/H/T
HB43 0/A/E/H
HB44 0/E/H
2U
1U
2D
1D
2U
1U
3U
2D
1D
3D
2U
1U
3U
4U
2D
1U
1D
1D
3D
4D
HB40 Standard front covers:
HB41-000
HB41-098
HB41-999
HB42-000
HB42-001
HB42-004
HB42-130
HB42-039
HB42-040
HB42-999
HB43-000
HB43-002
HB43-032
HB43-999
HB44-000
HB44-999
HB44-056
When ordering check that the handset functionality corresponds to the symbols on the front cover.
The last 2 digits in the front cover code are to be used in the ordering example (xx).
Specifications subject to change without prior notice.
It is the responsibility of the product user to determine the suitability
of LINAK A/S products for a specific application. LINAK will at point of
delivery replace/repair defective products covered by the warranty
if promptly returned to the factory. No liability is assumed beyond
such replacement/repair.
|