7
Switch Settings, Adjustments and Indicators
Marshall Electronics
1910 East Maple Ave.
El Segundo, CA 90245
Tel.: 800-800-6608 • Fax: 310-333-0688
Email: [email protected]
Tally Indicators
Illuminate when active
V-R72P-2SDD Users Guide
Dry Erase Label
Power On/Off switch
Illuminates red
when system pow
Controls
is present
ns when NTSC
Illuminates Gree
when monitor is O
e selected
Composite Video s
nal selector swit
Illuminates whe
active
Screen aspect ratio switch 4:3 or 16:9 selector and indicators
S-Video Signal sel
tor switch
Lights when acti
Component Sign
selector switch
Lights when acti
16:9 Aspect
4:3 Aspect
HDSDI/SDI Sign
selector switch
Note: Tapping any active input signal toggles BLUE
GUN On/Off. Signal selection is active when Blue
Gun is on. Tap active selection to turn off
Lights when acti
Color Bar
On/Off switch
Lights when active
Product Overview
Features
1
2
3
4
5
6
7
8
8
Warranty
Electrical Specifications
Mechanical Specifications
Operational Setup
Marshall Electronics warranties to the first consumer, that this V-R72P-2SD Triple 5.6 inch LCD rack mounted monitor set will, under normal use,
be free from defects in workmanship and materials, when received in its original container, for a period of one year from the purchase date.
This warranty is extended to the purchasing end user only and proof of purchase is necessary to honor the warranty. If there is no proof of
purchase provided with a warranty claim, Marshall Electronics reserves the right not to honor the warranty set forth above. Therefore, labor and
parts may be charged to you.
This warranty does not apply to product exterior and cosmetics. Misuse, abnormal service or handling, improper alterations or modifications in
design or construction, voids this warranty. No sales personnel of the seller, nor any other person is authorized to make any warranties other than
those described above, or to extend the duration of any warranties on behalf of Marshall Electronics, beyond the time period described above.
An extra note about LCD displays: It is considered normal for a minimal amount of pixels, not to exceed three, to fail on the periphery of the
display active viewing area. Marshall Electronics has the option to reserve service for display pixel failure if deemed unobtrusive to effective use
of the monitor by our technicians.
Connectors
Switch Settings, Adjustments and Indicators
Warranty
Due to constant effort to improve products and product features, specifications may change without notice.
|