OPERATION GUIDE
Models:
CV340 Series
CV500 Series
Please read this guide carefully before installaing and using the camera.
Please retain this guide for reference.
INFORMATIONMFEONRUUSSTERRUCTURE
MENU STRUCTURE
LENS
DC
OUTDOOR, INDOOR
SPECIAL CAM TITLE
VIDEO
MANUAL
EXPOSURE SHUTTER
D-EFFECT
MOTION
FREEZE
MIRROR
D-ZOOM
NEG.IMAGE
SELECT
DISPLAY
SENSIVITY
MOTION VIEW
DEFAULT
SELECT
AUTO
1/30sec ~ 1/50,000sec, x2~x30
LOW, MIDDLE, HIGH
AUTO (x20 ~ X30)
OFF
AGC
SENSE-UP
BRIGHTNESS 1 ~ 100
D-WDR (ACCE) OFF, LOW, MIDDLE, HIGH
DEFOG
BACKLIGHT
PRIVACY
OFF, LOW, MIDDLE, HIGH
BLC
HSBLC
OFF
DISPLAY
COLOR
DEFAULT
LANGUAGE
DEFECT
WHITE
BALANCE
ATW
LIVE DPC
LEVEL
STATIC DPC
START
LEVEL
AWC-SET
INDOOR
OUTDOOR
MANUAL
AUTO
1 ~ 100
DELAY
D-->N (AGC)
N-->D (AGC)
DAY
&
SENS-UP
RS485
VERSION
SHARPNESS
NIGHT
COLOR
B/W
ADJUST
SHARPNESS
LEVEL
RESOLUTION
LCD
CRT
BURST
IR SMART
IR LED
IR PWM
MONITOR
OSD
EXT
2DNR
3DNR
TEXT COLOR
OUTLINE
NR
S-LEVEL: 0 ~ 100
E-LEVEL: 0 ~ 100
0 ~ 100
LSC
NTSC/PAL
LEVEL
SMART IR
RESET
EXIT
ON, OFF
1080 HD-SDI Camera
2
3
1080 HD-SDI Camera
OSD Joystick and Button
LENS
MANUAL, VIDEO, DC
Select LENS using the UP or DOWN button.
You can change between MANUAL, VIDEO and DC using the LEFT or RIGHT button.
MANUAL: Manual Lens (Fixed focal or fixed IRIS lens)
VIDEO: Auto Iris Varifocal Lens.
DC: DC Auto Iris Varifocal Lens.
You can change the DC mode between INDOOR mode and OUTDOOR mode using the LEFT
or RIGHT button.
INDOOR: Select for indoor installation.
OURDOOR: Select for outdoor installation.
SETUP
DC LENS MODE
1. LENS
DC
DC
RETURN
INDOOR
RET
2. EXPOSURE
3. WHITE BAL
4. DAY & NIGHT
5. NR
ATW
AUTO
Press SET button to access the SETUP menu.
6. SPECIAL
7. ADJUST
8. RESET
Select each sub-menu by using the UP, DOWN, LEFT, and RIGHT buttons.
Press the SET button to select.
9. EXIT
SETUP
Use the UP & DOWN buttons
to select the desired item.
1. LENS
DC
Use the LEFT & RIGHT buttons
to change the sub-item.
2. EXPOSURE
3. WHITE BAL
4. DAY & NIGHT
5. NR
ATW
AUTO
6. SPECIAL
7. ADJUST
8. RESET
9. EXIT
Icon indicates “Press OSD Button” or “Enter Sub Menu”.
Icon indicates “Not Available”.
1080 HD-SDI Camera
4
5
HD-SDI 1080p Camera
EXPOSURE
SHUTTER
EXPOSURE
AGC
Select EXPOSEURE using the UP or DOWN button.
Select EXPOSEURE using the UP or DOWN button.
You can select SHUTTER, AGC, SENS-UP, BRIGHTNESS, DWDR (ACCE), DEFOG, and
BACKLIGHT menu using the UP or DOWN button.
You can select SHUTTER, AGC, SENS-UP, BRIGHTNESS, DWDR (ACCE), DEFOG, and
BACKLIGHT menu using the UP or DOWN button.
SHUTTER: You can adjust the shutter speed of the lens.
AGC(AUTO GAIN CONTROL): A function which controls the amplification/
gain process automatically if the illumination falls under the usable level.
You can adjust the shutter speed manually or select shutter speed mode from FLK or AUTO
mode using the LEFT or RIGHT button.
You can adjust the AC level from LOW, MIDDLE, or HIGH using the LEFT and RIGHT button.
FLK: Select this when you experience picture flicker, this happen when
there is a clash with the installed lighting frequency.
AUTO: Enable AUTO to control the shutter speed automatically. If AUTO
is selected, the shutter speed is automatically controlled depending on
the ambient illumination of the subject.
LOW: Allows automatic gain control from 5.3dB to 20dB.
MIDDLE: Allows automatic gain control from 5.3dB to 26dB.
HIGH: Allows automatic gain control from 5.3dB to 32dB.
1/30sec ~ 1/50,000sec, x2~x30: You can control shutter speed manually
using the LEFT or RIGHT button.
SETUP
EXPOSURE
1. LENS
DC
SHUTTER
AGC
SENS-UP
BRIGHTNESS
DWDR(ACCE)
DEFOG
AUTO
HIGH
AUTO
------45
OFF
OFF
OFF
RET
2. EXPOSURE
3. WHITE BAL
4. DAY & NIGHT
5. NR
6. SPECIAL
7. ADJUST
8. RESET
ATW
AUTO
SETUP
EXPOSURE
1. LENS
DC
SHUTTER
AGC
SENS-UP
BRIGHTNESS
DWDR(ACCE)
DEFOG
AUTO
HIGH
AUTO
------45
OFF
OFF
OFF
RET
2. EXPOSURE
3. WHITE BAL
4. DAY & NIGHT
5. NR
6. SPECIAL
7. ADJUST
8. RESET
BACKLIGHT
RETURN
ATW
AUTO
9. EXIT
BACKLIGHT
RETURN
9. EXIT
■ If the shutter mode is set to AUTO, carefully position the camera during installation since
the produced image might be poorly framed due to a bright light source.
■ If the gain control (AGC) of EXPOSURE mode is set to OFF, SENS-UP mode is accordingly
set to ‘- - -‘.
■ When the SHUTTER is set to MANUAL or FLK mode, SENS-UP will be disabled.
1080 HD-SDI Camera
6
7
1080 HD-SDI Camera
EXPOSURE
SENS-UP
EXPOSURE
BRIGHTNESS
Select EXPOSEURE using the UP or DOWN button.
Select EXPOSEURE using the UP or DOWN button.
You can select SHUTTER, AGC, SENS-UP, BRIGHTNESS, DWDR (ACCE), DEFOG, and
BACKLIGHT menu using the UP or DOWN button.
You can select SHUTTER, AGC, SENS-UP, BRIGHTNESS, DWDR (ACCE), DEFOG, and
BACKLIGHT menu using the UP or DOWN button.
BRIGHTNESS: Adjust the screen brightness.
SENS-UP: When it is in low luminance condition, the camera automatically
You can adjust the brightness level from 1 ~ 100 using the LEFT or RIGHT button.
detects the light level and maintains a clear picture quality if this mode is activated.
You can select the sense-up mode from OFF or AUTO mode using the LEFT or RIGHT button.
OFF: Deactivates the SENS-UP function.
SETUP
EXPOSURE
1. LENS
DC
AUTO: Activates the SENS-UP function.
SHUTTER
AGC
SENS-UP
BRIGHTNESS
DWDR(ACCE)
DEFOG
AUTO
HIGH
AUTO
------45
OFF
OFF
OFF
RET
2. EXPOSURE
3. WHITE BAL
4. DAY & NIGHT
5. NR
6. SPECIAL
7. ADJUST
8. RESET
ATW
AUTO
SETUP
EXPOSURE
1. LENS
DC
SHUTTER
AGC
SENS-UP
BRIGHTNESS
DWDR(ACCE)
DEFOG
AUTO
HIGH
AUTO
------45
OFF
OFF
OFF
RET
2. EXPOSURE
3. WHITE BAL
4. DAY & NIGHT
5. NR
6. SPECIAL
7. ADJUST
8. RESET
BACKLIGHT
RETURN
ATW
AUTO
9. EXIT
BACKLIGHT
RETURN
9. EXIT
SENS-UP
SENS-UP
RETURN
x8
RET
■ Higher BRIGHTNESS setting may cause noise, spots, or white image.
■ Ghosting in object movements may occur if the sens-up is set to higher level.
1080 HD-SDI Camera
8
9
1080 HD-SDI Camera
EXPOSURE
DWDR(ACCE), DEFOG
BACKLIGHT
Select EXPOSEURE using the UP or DOWN button.
Select EXPOSEURE using the UP or DOWN button.
You can select SHUTTER, AGC, SENS-UP, BRIGHTNESS, DWDR (ACCE), DEFOG, and
BACKLIGHT menu using the UP or DOWN button.
You can select SHUTTER, AGC, SENS-UP, BRIGHTNESS, DWDR (ACCE), DEFOG, and
BACKLIGHT menu using the UP or DOWN button.
DWDR(ACCE) : DWDR(ACCE) illuminates darker areas of an image while
retaining the same light level for brighter areas to even out the overall brightness
of images with high contrast between bright and dark areas.
BACKLIGHT: BACKLIGHT will help distinguish an object in front of the strong
background lighting.
You can select the BACKLIGHT mode from OFF, BLC, or HSBLC using the LEFT or RIGHT button.
You can select the DWDR level from OFF, LOW ,MIDDDLE, or HIGH using the LEFT or
RIGHT button.
OFF: Disable BACKLIGHT mode.
BLC: Enables a user to select a desired area on a picture and view that
area more clearly.
SETUP
EXPOSURE
1. LENS
DC
SHUTTER
AGC
SENS-UP
BRIGHTNESS
DWDR(ACCE)
DEFOG
AUTO
HIGH
AUTO
------45
OFF
OFF
OFF
RET
GAIN: Adjust level of the BLC function.
You can select the GAIN level from LOW, MIDDLE, and HIGH using the LEFT or RIGHT button.
AREA: Select the area to be enhanced.
You can select the BLC area using the UP, DOWM, LEFT or RIGHT button.
DEFAULT: Set the BLC setting value as default.
2. EXPOSURE
3. WHITE BAL
4. DAY & NIGHT
5. NR
6. SPECIAL
7. ADJUST
8. RESET
ATW
AUTO
BACKLIGHT
RETURN
SETUP
BACKLIGHT
9. EXIT
1. LENS
DC
SHUTTER
AGC
SENS-UP
BRIGHTNESS
DWDR(ACCE)
DEFOG
AUTO
HIGH
AUTO
------45
OFF
OFF
BLC
RET
2. EXPOSURE
3. WHITE BAL
4. DAY & NIGHT
5. NR
6. SPECIAL
7. ADJUST
8. RESET
ATW
AUTO
DEFOG: DEFOG feature will help increase visibility in extreme weather conditions,
such as fog, rain or in a very strong luminous intensity.
BACKLIGHT
RETURN
You can select the DEFOG level from OFF, LOW MIDDLE, or HIGH using the LEFT or
RIGHT button.
9. EXIT
SETUP
EXPOSURE
1. LENS
DC
BLC
SHUTTER
AGC
SENS-UP
BRIGHTNESS
DWDR(ACCE)
DEFOG
AUTO
HIGH
AUTO
------45
OFF
OFF
OFF
RET
2. EXPOSURE
3. WHITE BAL
4. DAY & NIGHT
5. NR
6. SPECIAL
7. ADJUST
8. RESET
GAIN
AREA
DEFAULT
RETURN
MIDDLE
RET
ATW
AUTO
POSITION
BACKLIGHT
RETURN
9. EXIT
1080 HD-SDI Camera
10
11
1080 HD-SDI Camera
EXPOSURE
BACKLIGHT
WHITE BALANCE
Select EXPOSEURE using the UP or DOWN button.
You can select SHUTTER, AGC, SENS-UP, BRIGHTNESS, DWDR (ACCE), DEFOG, and
BACKLIGHT menu using the UP or DOWN button.
Select WHITE BALANCE using the UP or DOWN button.
You can change the white balance mode between ATW, AWC-SET, INDOOR, or OUTDOOR
using the LEFT or RIGHT button.
HSBLC: If the scene contains extremely bright light areas such as; from
car headlight, the light can mask out much of the on-screen detail.
ATW: Select this when the color temperature is between 2,400˚K and 11,000˚K.
(Ex. A fluorescent lamp)
AWC SET: The white balance is automatically adjusted in a specific luminance
environment. To find the optimal luminance level for the current environment, point
the camera towards a shoot of white paper and press the SET button.
INDOOR: Select this when the color temperature is between 4,500˚K and 8,500˚K.
OUTDOOR: Select this when the color temperature is between 1,700˚K and 11,000˚K.
(Ex. sodium light inclusion)
SELECT: Select the area to be enhanced (AREA1, AREA2, AREA3, AREA4)
You can select the BLC area using UP, DOWM, LEFT or RIGHT button.
DISPLAY: Display the zone or not and adjust the size and position.
Select ON using LEFT and RIGHT button and press SET button to display
the HSBLC area zone.
POSITOIN: Adjust the position.
MANUAL: Select this to fine-tune White Balance manually.
You can adjust HSBLC area position UP, DOWN, LEFT or RIGHT button.
SIZE : Adjust the size.
You can adjust HSBLC area size sing UP, DOWN, LEFT or RIGHT button.
You can adjust the blue and red tone level manually.
LEVEL: Adjust level of the HLC function.
BLUE: Adjust the blue tone of the image. (0~100)
RED: Adjust the red tone of the image. (0~100)
MODE: Select the HSBLC mode from NIGHT and ALL DAY.
BLACK MASK: Enable/Disable BLACK MASK function.
DEFAULT: Set the HSBLC setting value as default.
SETUP
HSBLC
1. LENS
DC
SELECT
DISPLAY
LEVEL
AREA1
ON
------45
ALL DAY
ON
2. EXPOSURE
3. WHITE BAL
4. DAY & NIGHT
5. NR
6. SPECIAL
7. ADJUST
8. RESET
ATW
AUTO
MODE
POSITION
BLACK MASK
DEFAULT
RETURN
RET
9. EXIT
■ Because there can be a difference in the effectiveness of HSBLC according to the amount of light area
in the screen, optimize the installation angle for the best HSBLC performance.
■ HSBLC is only activated in low luminance condition if a bright area exceeds a designated size.
■ HSBLC is not activated in day light or when bright light is not present at night.
■ Set White Balance first by using the ATW or AWC mode. After that switch to MANUAL mode,
■ White Balance may not work properly under the following conditions. In this case select the AWC mode.
- When the ambient illumination of the subject is dim.
- If the camera is directed towards a fluorescent light or is installed in place where illumination changes
dramatically, the White Balance operation may become unstable.
1080 HD-SDI Camera
12
13
1080 HD-SDI Camera
DAY & NIGHT
COLOR, B/W
DAY & NIGHT
AUTO, EXT
Select DAY & NIGHT using the UP or DOWN button.
Select DAY & NIGHT using the UP or DOWN button.
You can change the day & night mode between COLOR, B/W, AUTO, or EXT using the LEFT
or RIGHT button.
You can change the day & night mode between COLOR, B/W, AUTO, or EXT using the LEFT
or RIGHT button.
AUTO: The mode is switched to COLOR in a normal environment, but switched
to B/W mode when ambient illumination is low.
COLOR: The picture is always displayed in color.
B/W: The picture is always displayed in black and white.
You can select and adjust DELAY, D N, and N D using the LEFT or RIGHT button.
You can select and adjust BURST, IR SMART, IR LED, and IR PWM.
BURST: Determines whether to transmit the burst signal or not .
IR SMART: Decrease screen saturation of objects within a short range.
DELAY: You can select day/night switching delay time from. (0s ~ 60s)
D
N (AGC): Adjust the brightness of the lighting where the mode switch
occurs from day to night.
D (AGC): Adjust the brightness of the lighting where the mode switch
LEVEL: Adjust level of the IR SMART function.
AREA: Select the area to activate the IR SMART.
You can select IR SMART area using the UP, DOWN, LEFT or RIGHT button.
IR LED: Enable/Disable IR LEDs.
N
occurs from night to day.
IR PWM: Adjust the IR LEDs output level.
SETUP
DAY & NIGHT AUTO
DELAY
1. LENS
DC
---------5
--------75
--------35
RET
SETUP
DAY & NIGHTIGHT
2. EXPOSURE
3. WHITE BAL
4. DAY & NIGHT
5. NR
6. SPECIAL
7. ADJUST
8. RESET
D
N
N (AGC)
D (AGC)
1. LENS
DC
BURST
IR SMART
IR LED
IR PWM
RETURN
ON
ON
ON
------40
RET
ATW
AUTO
2. EXPOSURE
3. WHITE BAL
4. DAY & NIGHT
5. NR
RETURN
ATW
AUTO
6. SPECIAL
7. ADJUST
8. RESET
9. EXIT
9. EXIT
IR SMART
LEVEL
AREA
ETURN
--------40
RET
■ EXT function is disabled.
1080 HD-SDI Camera
14
15
1080 HD-SDI Camera
NR (Noise Reduction)
2DNR, 3DNR
SPECIAL
CAM TITLE
Select NR (NOISE REDUCTION) using the UP or DOWN button
You can move the menu from 2DNR, 3DNR, LEVEL, and SMART IR and set each menu using
the LEFT or RIGHT button.
Select SPECIAL using the UP or DOWN button.
You can select the sub-menu from CAM TITLE, D-EFFECT, MOTION, PRIVACY, LANGUAGE,
DEFECT, RS485, and VERSION using the UP or DOWN button.
2DNR: Reducing noise in the brightness of the image.
3DNR: Reducing noise causing by movement.
- S-LEVEL: Set the start level of 3DNR function.
- E -LEVEL: Set the end level of 3DNR function.
LEVEL: Adjust noise reduction level.
CAM TITLE: If you enter a title, the title will appear on the monitor.
You can input the camera title from the virtual keyboard using the LEFT, RIGHT, UP, DOWN, and
SET button.
SETUP
SPECIAL
SMART NR: Activates & Deactivates 2DNR & 3DNR Automatically depends with
environment.
1. LENS
DC
CAM TITLE
D-EFFECT
MOTION
PRIVACY
LANGUAGE
DEFECT
RS485
VERSION
RETURN
OFF
2. EXPOSURE
3. WHITE BAL
4. DAY & NIGHT
5. NR
6. SPECIAL
7. ADJUST
8. RESET
ATW
AUTO
OFF
OFF
ENG
2D & 3D NR
SETUP
1. LENS
DC
2DNR
ON
ON
--------70
ON
2. EXPOSURE
3. WHITE BAL
4. DAY & NIGHT
5. NR
6. SPECIAL
7. ADJUST
8. RESET
3DNR
LEVEL
SMART NR
RETURN
ATW
AUTO
0C0C00
RET
9. EXIT
RET
9. EXIT
CAM TITLE
0
1
2
3
4
5
6
7
8 9
K
A B C D E F G H I J
L M N O P Q R S T U V
W X Y Z ▶ → ← ↑ ↓ ( )
¯
-
_
■
/
=
&
: ~ , .
→
←
CLR P OS END
- - - - - - - - - - - - - - -
■ When adjusting the noise reduction level in the NR mode, remember that the higher the level set,
the more the noise level will be reduced, as will the brightness of the image.
1080 HD-SDI Camera
16
17
1080 HD-SDI Camera
SPECIAL
D-EFFECT
SPECIAL
MOTION
Select SPECIAL using the UP or DOWN button.
You can select the sub-menu from CAM TITLE, D-EFFECT, MOTION, PRIVACY,
LANGUAGE, DEFECT, RS485, and VERSION using the UP or DOWN button.
Select SPECIAL using the UP or DOWN button.
You can select the sub-menu from CAM TITLE, D-EFFECT, MOTION, PRIVACY, LANGUAGE,
DEFECT, RS485, and VERSION using the UP or DOWN button.
MOTION: This product has a feature that allows you to observe the object movement,
and display <MOTION> indicator on the screen.
You can select the digital effect mode from SELECT AREA, DISPLAY, SENSIVITY, MOTION VIEW, \
and DEFAULT using the UP or DOWN button.
D-EFFECT
AUTO
You can select the digital effect mode from FREEZE, MIRROR, D-ZOOM, and NEG.IMAGE
10
using the UP or DOWN button.
SELECT AREA: You can select up to 3 motion detection areas.
You can select the motion detection area using the LEFT or RIGHT button.
DISPLAY: Adjust the size and position of the selected area.
Select ON using LEFT and RIGHT button and press SET button to display the motion zone.
- POSITOIN: Adjust the position.
You can adjust the motion detection zone using the UP, DOWN, LEFT or RIGHT button.
- SIZE: Adjust the size.
You can adjust the motion detection size using the UP, DOWN, LEFT or RIGHT button.
SENSITIVITY: Adjust the sensitivity of the motion detection.
You can select the motion detection zone color using the LEFT or RIGHT button.
MOTION VIEW
FREEZE: You can stop the image or reactivate it.
Select ON to freeze the image using the LEFT or RIGHT button.
MIRROR: You can adjust or rotate the picture vertically and or horizontally.
You can select the mirroring effect mode from MIRROR, V-FLIP, and ROTATE using the
LEFT or RIGHT button.
D-ZOOM: You can use a digital zoom of x1 ~ x64.
Select ON using LEFT and RIGHT button and press SET button to display the DIGITAL
ZOOM menu .
NEG. IMAGE: You can flip the color on screen.
You can select ON to display the motion detection.
DEFAULT: Set the etting value as default.
SETUP
SPECIAL
1. LENS
DC
CAM TITLE
D-EFFECT
MOTION
PRIVACY
LANGUAGE
DEFECT
RS485
VERSION
RETURN
OFF
SETUP
SPECIAL
2. EXPOSURE
3. WHITE BAL
4. DAY & NIGHT
5. NR
6. SPECIAL
7. ADJUST
8. RESET
ATW
AUTO
1. LENS
DC
OFF
OFF
ENG
CAM TITLE
D-EFFECT
MOTION
PRIVACY
LANGUAGE
DEFECT
RS485
VERSION
RETURN
OFF
2. EXPOSURE
3. WHITE BAL
4. DAY & NIGHT
5. NR
6. SPECIAL
7. ADJUST
8. RESET
ATW
AUTO
OFF
OFF
ENG
0C0C00
RET
9. EXIT
0C0C00
RET
9. EXIT
D-EFFECT
MOTION
FREEZE
OFF
OFF
OFF
OFF
RET
SELECT
AREA1
MIRROR
D-ZOOM
NEG. IMAGE
RETURN
DISPLAY
ON
SENSIVITY
MOTION VIEW
RETURN
------48
ON
RET
POSITION
1080 HD-SDI Camera
18
19
1080 HD-SDI Camera
SPECIAL
PRIVACY
SPECIAL
LANGUAGE
Select SPECIAL using the UP or DOWN button.
You can select the sub-menu from CAM TITLE, D-EFFECT, MOTION, PRIVACY,
LANGUAGE, DEFECT, RS485, and VERSION using the UP or DOWN button.
Select SPECIAL using the UP or DOWN button.
You can select the sub-menu from CAM TITLE, D-EFFECT, MOTION, PRIVACY, LANGUAGE,
DEFECT, RS485, and VERSION using the UP or DOWN button
PRIVACY: Task an area you want to hide on the screen.
You can select the digital effect mode from SELECT AREA, DISPLAY, COLOR, an
UP or DOWN button.
LANGUAGE: You can select the menu language according to your requirements.
You can select the language from ENGLISH, JAPANESE, CHINESE1, and CHINESE2 using the
LEFT or RIGHT button.
O
OFF
d
F
DEFAULT using the
F
SELECT AREA: You can select up to 8 PRIVACY areas.
You can select the privacy area using the LEFT or RIGHT button.
RS-485: Using RS-485 communication, the camera menu can be accessed using
System Controller or the DVR (Other Equipment).
DISPLAY: Adjust the size and position of the selected area.
Select ON using LEFT and RIGHT button and press SET button to display the privacy zone.
- POSITOIN: Adjust the position.
You can select the language from ENGLISH, JAPANESE, CHINESE1, and CHINESE2 using the LEFT
or RIGHT button.
You can adjust the privacy zone using the UP, DOWN, LEFT or RIGHT button.
- SIZE: Adjust the size.
You can adjust the privacy size using the UP, DOWN, LEFT or RIGHT button.
COLOR: Determine area color. You can select 16 different colors.
You can select privacy area color using the LEFT or RIGHT button.
DEFAULT: Set the PRIVACY setting value as default.
SETUP
SPECIAL
1. LENS
DC
CAM TITLE
D-EFFECT
MOTION
PRIVACY
LANGUAGE
DEFECT
RS485
VERSION
RETURN
OFF
2. EXPOSURE
3. WHITE BAL
4. DAY & NIGHT
5. NR
6. SPECIAL
7. ADJUST
8. RESET
ATW
AUTO
OFF
OFF
ENG
SETUP
SPECIAL
1. LENS
DC
CAM TITLE
D-EFFECT
MOTION
PRIVACY
LANGUAGE
DEFECT
RS485
VERSION
RETURN
OFF
2. EXPOSURE
3. WHITE BAL
4. DAY & NIGHT
5. NR
6. SPECIAL
7. ADJUST
8. RESET
0C0C00
RET
9. EXIT
ATW
AUTO
OFF
OFF
ENG
SPECIAL
SETUP
1. LENS
DC
CAM TITLE
D-EFFECT
MOTION
PRIVACY
LANGUAGE
DEFECT
RS485
VERSION
RETURN
OFF
0C0C00
RET
2. EXPOSURE
3. WHITE BAL
4. DAY & NIGHT
5. NR
6. SPECIAL
7. ADJUST
8. RESET
9. EXIT
ATW
AUTO
OFF
OFF
ENG
MOTION
SELECT
DISPLAY
COLOR
AREA1
ON
1
0C0C00
RET
9. EXIT
POSITION
DEFAULT
RETURN
RET
■ RS-485 function is disabled.
1080 HD-SDI Camera
20
21
1080 HD-SDI Camera
SPECIAL
DEFECT
ADJUST
SHARPNESS
Select SPECIAL using the UP or DOWN button.
You can select the sub-menu from CAM TITLE, D-EFFECT, MOTION, PRIVACY, LANGUAGE,
DEFECT, RS485, and VERSION using the UP or DOWN button.
Select ADJUST using the UP or DOWN button.
You can select the sub-menu from SHARPNESS, MONITOR, OSD, LSD, and
NTSC/PAL using the UP or DOWN button.
DEFECT: Sensors could have defects for something wrong in the process of their
storage or manufacturing process. Such defects are called dead pixels, which
SHARPNESS: As you increase this value, the picture outline becomes stronger and
clearer. Adjust this value appropriately depending on the sharpness of the picture.
You can select the sharpness mode from SHARPNESS, LEVEL, and resolution using the UP or
DOWN button.
OFF
consist of two types: static dead pixel and dynamic dead pixel. The first can be
OFF
NTSC
found from the beginning while the second is found over time after using sensors
1080P
for a certain period of time. Dynamic dead pixels may not be visible on the screen
of ordinary illumination. However, they can be made visible by amplifying the
ON
SHARPNESS: Select ON to activate the SHARPNESS function.
LEVEL: Adjust the level of the sharpness.
RESOLUTION: Select ON to increase the image quality.
analog/digital gain. Dead pixel correction (DPC) corrects such defects.
You can select the defect correction mode from LIVE DPC and STATIC DPC using the UP or
DOWN button.
LIVE DPC: Auto Dead pixel correction
LEVEL: Level of Auto Dead pixel correction
STATIC DPC: Manual Dead pixel correction
START: Start Dead pixel correction
LEVEL: Level of Manual Dead pixel correction
SENS-UP: Display Sens-Up Value
SETUP
ADJUST
1. LENS
DC
2. EXPOSURE
3. WHITE BAL
4. DAY & NIGHT
5. NR
6. SPECIAL
7. ADJUST
8. RESET
SHARPNESS
MONITOR
OSD
LSC
NTSC/PAL
RETURN
ATW
AUTO
LCD
OFF
NTSC
RET
SETUP
SPECIAL
1. LENS
DC
CAM TITLE
D-EFFECT
MOTION
PRIVACY
LANGUAGE
DEFECT
RS485
VERSION
RETURN
OFF
2. EXPOSURE
3. WHITE BAL
4. DAY & NIGHT
5. NR
6. SPECIAL
7. ADJUST
8. RESET
9. EXIT
ATW
AUTO
OFF
OFF
ENG
SHARPNESS
0C0C00
RET
9. EXIT
SHARPNESS
LEVEL
ON
----50
ON
RESOLUTION
DEFECT
LIVE DPC
LEVEL
STATIC DPC
START
ON
--------30
ON
LEVEL
SENS-UP
RETURN
--------40
RET
1080 HD-SDI Camera
22
23
1080 HD-SDI Camera
ADJUST
MONITOR
SPECIAL
CAM TITLE
Select ADJUST using the UP or DOWN button.
You can select the sub-menu from SHARPNESS, MONITOR, OSD, LSD, and
NTSC/PAL using the UP or DOWN button.
Select ADJUST using the UP or DOWN button.
You can select the sub-menu from SHARPNESS, MONITOR, OSD, LSD, and
NTSC/PAL using the UP or DOWN button.
OSD: You can adjust style of font.
LSC: Lens shading compensation. Select ON to activate the brightness
compensation on the corner of lens.
MONITOR: Choose the appropriate setting for your monitor.
You can select the monitor mode from LCD or CRT using the LEFT or RIGHT button.
NTSC/PAL: Select video type from NTSC or PAL.
LCD: Select this menu item when using an LCD monitor.
You can select the sub-menu using the UP or DOWM button.
- GAMMA: Select and adjust the gamma level.
- BLUE: Adjust blue the gain level.
SETUP
ADJUST
1. LENS
DC
2. EXPOSURE
3. WHITE BAL
4. DAY & NIGHT
5. NR
6. SPECIAL
7. ADJUST
8. RESET
- RED: Adjust red the gain level.
SHARPNESS
MONITOR
OSD
LSC
NTSC/PAL
RETURN
ATW
AUTO
CRT: Select this menu item when using an CRT monitor.
You can select the sub-menu using the UP or DOWM button.
- BLACK: Adjust the contrast level.
LCD
OFF
NTSC
RET
- BLUE: Adjust blue the gain level.
- RED: Adjust red the gain level.
9. EXIT
SETUP
ADJUST
1. LENS
DC
2. EXPOSURE
3. WHITE BAL
4. DAY & NIGHT
5. NR
6. SPECIAL
7. ADJUST
8. RESET
SHARPNESS
MONITOR
OSD
LSC
NTSC/PAL
RETURN
SETUP
ADJUST
ATW
AUTO
LCD
OFF
NTSC
RET
1. LENS
DC
2. EXPOSURE
3. WHITE BAL
4. DAY & NIGHT
5. NR
6. SPECIAL
7. ADJUST
8. RESET
SHARPNESS
MONITOR
OSD
LSC
NTSC/PAL
RETURN
ATW
AUTO
LCD
OFF
NTSC
RET
9. EXIT
9. EXIT
LCD
CRT
SETUP
ADJUST
GAMMA
AUTO
BLACK LEVEL
BLUE GAIN
RED GAIN
RETURN
IIIIIIIII +0
IIIIIIIII 50
IIIIIIIII 50
RET
1. LENS
DC
BLUE GAIN
RED GAIN
RETURN
IIIIIIIII 50
IIIIIIIII 50
RET
2. EXPOSURE
3. WHITE BAL
4. DAY & NIGHT
5. NR
6. SPECIAL
7. ADJUST
8. RESET
SHARPNESS
MONITOR
OSD
LSC
NTSC/PAL
RETURN
ATW
AUTO
LCD
OFF
NTSC
RET
9. EXIT
1080 HD-SDI Camera
24
25
1080 HD-SDI Camera
RESET
TROUBLE SHOOTING
PROBLEM
SOUTION
Select RESET using the UP or DOWN button.
● Check that the power cord and line connection between the camera and
monitor are properly connected.
RESET: Reset the camera settings to the factory defaults.
● Check that video cable is connected with the Analog BNC (Yellow).
● When the camera’s HD-SDI BNC output is directly connected to the
monitor’s BNC terminal: Make sure the monitor supports HD-SDI signal input.
● When the camera’s HD-SDI BNC output is connected to the DVR: Make
sure the DVR supports HD-SDIsignalinput.
You can reset the camera setting using the SET button.
Nothing appears on the screen.
The image on the screen is dim.
SETUP
● HD-SDI output is converted into other format such as DVI and VGA by
using video converter: Make sure the converter’s HD-SDI input format
1. LENS
DC
2. EXPOSURE
3. WHITE BAL
4. DAY & NIGHT
5. NR
ATW
AUTO
● Is lens stained with dirt? Clean your lens with soft, clean cloth.
● Set the monitor to the propercondition.
● If the camera is exposed to very strong light, change the cameraposition.
● Re-adjust the back-
6. SPECIAL
7. ADJUST
8. RESET
The image onthe screenis dim, when
the LED is on.
● Check if the LEDs are shaded and reflected by the cameraring,camerabase, or other
objects near the camera.
9. EXIT
The LEDs are reflectedover the
dome or cover.
● Check if the LEDs are shaded and reflected by the cameraring,camerabase, or other obje
cts near the camera.
● Adjust the contrast feature of the monitor.
The image on the screen is dark.
● If there is an intermediate device, set 75Ω properly; Check the termination.
The camera is not working
properly, and the surface of the
camera is hot.
● Check that you have properly connected the camera to an appropriate
power source.
The SENS-UP function does not
work.
● Check that AGC of EXPOSURE SETUP menu is ‘OFF’.
The Motion Detection function
does not work.
● Check that MOTION DET of SPECIAL SETUP menu is ‘OFF’.
Color is not correct.
● Check the setting of WHITE BAL SETUP menu .
● Ensure the camera is not pointing towards the sun.
● Is the camera framing the sun or other bright light source?
● If there is an intermediate device, set 75OΩ properly; Check the termination.
● HD-SDI video may not appear to be normal if distanceexceedsthe
maximum transferrable distance.
The screen flickers continually.
● When a BNC cable adaptoris used to combine two or moreBNC cables
for distributed HD-SDI video transfer, makesure the impedance of the
adaptor is 75Ω. Otherwise, it may cause shorter transferdistance or
broken video transfer.
1080 HD-SDI Camera
26
27
1080 HD-SDI Camera
|