WMX
Hybrid™ horn and reflex loaded subwoofer
features
Q
Very high output compact Hybrid™ folded horn/reflex loaded
subwoofer.
Q
Q
Q
Q
Q
Q
Q
Single 18" (460mm) ultra-long excursion high power drive unit
Frequency response 35Hz-150Hz 3dB (-10dB @ 28Hz)
104dB 1W/1m
Fast integral rigging system
Compatable with W8LM and W8LMD line array elements
Can be ground stacked or flown
Socket for pole mounted W8LMD
applications
Q
Q
Q
Q
Q
Q
Dedicated flown or groundstacked sub for use with W8LM and W8LMD
Ground stacked sub with any Martin Audio Wavefront products
Fixed installations
Live sound reinforcement
Corporate events
Theatre sound reinforcement
technical specifications
The Martin Audio WMX is a compact, high performance flown or
ground stacked subwoofer featuring our trademark Hybrid™
loading. Primarily intended for use with the W8LM/W8LMD, it
shares the same cabinet width and is directly compatible with the
W8LM and its flying hardware.
TYPE
Hybrid™ horn and reflex loaded subwoofer
FREQUENCY RESPONSE (1) 35Hz-150Hz 3dB
-10dB @ 28Hz
DRIVERS
18" (460mm)/ 4" (100mm) voice coil, ultra-long
excursion, water resistant cone
1000W AES, 4000W peak
98dB (open space), 104dB (half space)
127dB continuous, 133dB peak (open space)
133dB continuous, 139dB peak (half space)
8 ohms
RATED POWER (2)
SENSITIVITY (6,3)
MAXIMUM SPL
(calculated @ 1m)
NOMINAL IMPEDANCE
CROSSOVER
A single long-excursion 18" (460mm)/ 4" (100mm) coil driver is
front loaded by a hyperbolic horn with an ultra-low flare rate. The
rear of the driver is reflex loaded to extend the LF output to below
the natural cut-off point of the horn. This Hybrid™ technique
marries the very high efficiency of horn loading with the extended
low frequency response of a reflex enclosure.
70Hz-150Hz active low pass
(via DX1 controller)
ENCLOSURE
FINISH
Rectangular, multi-laminate birch ply
Textured paint
PROTECTIVE GRILLE
CONNECTORS
FITTINGS
Perforated steel
2 x Neutrik NL8
overall dimensions
Proprietary rigging system
Interlocking skids on top & bottom
2 generously sized bar handles on each side
Mounting clips for optional lid
Top mounted top hat fitting
(W) 620mm x (H) 620mm x (D) 905mm
(1032mm)
DIMENSIONS (inc. wheels)
WEIGHT
(W) 24.4ins x (H) 24.4ins x (D) 35.6ins (40.6ins)
87kg (191lbs)
Century Point, Halifax Road, Cressex Business Park,
High Wycombe, Buckinghamshire HP12 3SL, England.
Telephone: +44 (0)1494 535312 Facsimile: +44 (0)1494 438669
E-mail: [email protected]
All information is Copyright © 2006 Martin Audio Ltd.
|