Electric Dryer
PRODUCT MODEL NUMBERS
MED3000B, MED4000B, MED4200B,
MED6000A, MED7000A, MED8000A
Front view:
Side view:
27"
(686 mm)
383/4" Min.
(984 mm)
39" Max.
(990 mm)
Back view:
61/2"
(165 mm)
Recommended installation clearances (dryer only):
NOTE: Most
installations
Power supply
cord/cable
require a minimum
of 5" (127 mm)
clearance behind
dryer for exhaust
vent with elbow.
See “Venting
297/8"*
(759 mm)
3"
(76 mm)
Water inlets
(steam models
18" min.
(457 mm)
48 in.2 min.
(310 cm2)
only)
31/2"*
Vent
(89 mm)
Requirements.”
24 in.2 min.
(155 cm2)
61/8"*
(156 mm)
3/4"*
(18 mm)
*
5"
3"
(76 mm)
(127 mm)
143/8"
(365 mm)
* Approx. measurement.
1"
(25 mm)
1"
*
(25 mm)
Installation spacing for recessed area
or closet installation
* 0" (0 mm) spacing is allowed.
All dimensions show recommended and minimum spacing allowed.
■
Additional spacing should be considered for ease of
installation and servicing.
■
■
■
Additional clearances might be required for wall, door, floor moldings, and dryer venting.
Additional spacing should be considered on all sides of the dryer to reduce noise transfer.
For closet installation, with a door, minimum ventilation openings in the top and bottom of the door are required.
Louvered doors with equivalent ventilation openings are acceptable.
W10573709B
10/2013
■
Companion appliance spacing should also be considered.
|