MV900
User Manual
1. Introduction
Thank you for purchasing the mVox MV900 Bluetooth speakerphone.The MV900
is a true hands-free speakerphone with built-in DSP voice processing technology,
user independent voice dialing, and Bluetooth connectivity.The DSP-enabled
echo cancellation and noise suppression allowing natural and smooth full-
duplex conversations, whether you’re driving under noisy highway conditions,
engaging in a conference call through Voice over IP (VoIP), or just sitting in
front of your computer chatting on Instant Messenger (IM). An earpiece is
also included for private conversations. Get ready to experience the best
in hands-free communication!
2. Function Modes and Compatibility
The MV900 can operate in 3 modes:
• As a Bluetooth speakerphone when it has been paired with a
Bluetooth Cell phone
• As a USB speakerphone when plugged into an Internet-ready computer with
Instant Messenger or Voice over IP software
• As a speakerphone for desktop phones when used with an optional adapter
The MV900 is designed to work with any Bluetooth Cell phone and any
Instant Messenger or Voice over IP software.
Mute/low
battery
Volume
indicator
up/down,
Talk button,
white LED
mute switch
Analog
mode jack
On/Off Switch
Earpiece jack
Charging indicator
Mini USB-B jack
Power Jack 5.0V DC
2
3. Charging
To charge the MV900, use the included AC adapter or connect to a USB port on
a computer.While the MV900 is charging, the charging indicator will show red.
The indicator will turn green when the MV900 is fully charged.
Note: A bus-powered USB hub cannot supply enough current for charging.We recommend
plugging the MV900 directly into the computer’s USB port or using a self-powered USB hub.
A self-powered USB hub has its own power supply via an AC adapter, while a bus-powered USB
hub draws its power through the USB bus, without an AC adapter.
4. Turning on the MV900
To turn on the MV900, slide the On/Off Switch to the On position.When the
MV900 is powered on, the white LED around the Talk Button will turn on and flash.
5. Basic operations
• Volume up: Press up on the volume switch
• Volume down: Press down on the volume switch
• Mute Microphone: Press in the volume switch (red LED lights up to
indicate that the microphone is muted)
6. Headset mode (Privacy mode)
The MV900 includes an earpiece for private conversations.
Plug in the earpiece to the 2.5mm jack on the side of MV900.
7. Using as a USB Speakerphone
To use the MV900 as a USB speakerphone for conference calls and to chat through
IM and VoIP applications, plug the MV900 into a USB port on the computer
(with the included USB cable). After connecting to the USB port, you can use
the computer’s volume control panel to access volume up, volume down,
and the mute controls. Users can adjust speaker and microphone volume settings
in the Adjust Audio Properties menu under the control panel.
8. Using with Desktop Phones
The MV900 includes analog mode. It is designed to connect the
handset of a desktop phone through an optional adapter
telephone to be used as an external speakerphone.
3
9. Using as a Bluetooth Speakerphone with Cell Phones
You will need to first pair the MV900 to your Cell phone before you can use
the MV900 as a Bluetooth speakerphone.
1) Pair with a Bluetooth Cell phone
Note: After MV900 is turned on, the MV900 will voice prompt “Connecting” then try to connect
to the last Cell phone paired. If the previous paired Cell phone cannot be found or MV900 has not
been paired before, the MV900 will voice prompt “Cell phone not available”.
To start, press and hold the mute button until the white LED is lit solid and you
will hear the MV900 beep twice. The MV900 is now in Pairing Mode.
Follow the Bluetooth connection instructions on your Cell phone to pair with the
MV900. When your Cell phone asks for the password enter“1234”as the device
password. If the pairing is successful you will hear the voice prompt“Bluetooth
Paired”from the MV900. You will need to pair your Cell phone once. Please see
your Cell phone User Manual for detailed instructions on Bluetooth Pairing.
Press in and hold
2) Connect MV900 to your Cell Phone
You can start your connection with a paired Cell Phone or the MV900. It is
recommended that you activate your connection through the MV900.
Press and release the Talk Button on MV900 and you will hear“Connecting”.
4
10. Operations in Bluetooth mode
Function
Action
Receiving a call
Rejecting a call
Hang up a call
Transfer call to handset
Press and release talk button
Press and release the mute button
Press and release talk button
Press in volume switch (mute LED lights up), then
press talk button to transfer call to the Cell Phone
Transfer call to speakerphone
Press talk button to transfer call to the MV900
1) Receive and reject an incoming call
When you have an incoming call you will hear the voice prompt“Incoming Call
(012) 345-6789”. Press and release the Talk Button to receive the incoming call or
press and release the mute button to reject the call.
2) Hang up a call
To terminate a call you will need to press and release the Talk Button while the
call is in progress.When the call has ended you will hear the voice prompt say
“Call Terminated”.
3) Transfer a call from or to Cell Phone
If you need privacy while on call with the MV900 you can transfer your call to
your handset by pressing in on the Volume Switch (mute LED will light up) then
press the Talk Button on the MV900 to transfer the call.
If your Cellphone is a flip phone, make sure to open the phone first before
transferring. If the phone is closed, your call will hang up when you transfer
the call.
To transfer calls from your handset to the MV900, press the Talk Button on
the MV900.
5
11. Using the Voice Command Recognition and Voice Keypad (VKP)
To get into the voice command recognition mode, press and release the
Talk Button, wait for the voice prompt“Please Say Command.”Proceed by
saying one of the following commands.
Voice Commands Supported
Command
Command Description
Home
Dial Home number stored in memory
Dial Work number stored in memory
Dial Home voicemail stored in memory
Dial Work voicemail stored in memory
Dial Cell phone voicemail stored in memory
Dial last number (Redial)
Work
Voicemail Home
Voicemail Work
Voicemail Cell phone
Last Call
Setup menu
Enter setup menu
Cell phone name dialing
Dial number
Activate Cell phone voice dialing
Dial by using voice keypad
Speed dial One
Speed dial Two
Speed dial Three
Speed dial Four
Speed dial Five
Speed dial Six
Speed dial Seven
Speed dial Eight
Speed dial Nine
Memory One
Memory Two
Memory Three
Memory Four
Memory Five
Memory Six
Dial speed dial one on the Cell phone
Dial speed dial two on the Cell phone
Dial speed dial three on the Cell phone
Dial speed dial four on the Cell phone
Dial speed dial five on the Cell phone
Dial speed dial six on the Cell phone
Dial speed dial seven on the Cell phone
Dial speed dial eight on the Cell phone
Dial speed dial nine on the Cell phone
Dial memory one number stored in memory
Dial memory two number stored in memory
Dial memory three number stored in memory
Dial memory four number stored in memory
Dial memory five number stored in memory
Dial memory six number stored in memory
Dial memory seven number stored in memory
Dial memory eight number stored in memory
Dial memory nine number stored in memory
Memory Seven
Memory Eight
Memory Nine
Note: “Home”,“Work”,“Voicemail Home,Work or Cell Phone”, and “Memory 1 through 9” require
users to set up the number in the setup menu first. Please refer to the setup menu section for
information on how to enter number.
6
Tips for using the Voice Recognition and Voice Keypad
• Say the command after you have heard the beep
• Say command or the numbers by speaking naturally. Avoid speaking too loud,
too close to the microphone, or speaking too slow.
• Always say“zero”for 0. Do not use“oh”.
• You can press the Talk Button to cancel any commands to start things over.
1) Using Home,Work,Voicemail, Memory
Press and release the Talk Button and say the command you would like to call.
When you use Memory say“Memory X”, X being 1-9.
7
2) Voice Keypad Dialing
You can use the MV900 to dial the phone number.To use the Voice Keypad press
and release the Talk Button wait for the voice prompt and say“Dial Number”,
now say the phone number you would like to dial.
3) Cell Phone Name Dialing
Follow your Cell Phone’s user manual to set up names or phone numbers on your
Cell Phone. Press and release the Talk Button and say“Cell phone Name Dialing”
and now say the name you want to call.You can also press and hold the Talk
Button; you will hear the voice prompt“Cell Phone Name Dialing”.
8
4) Speed Dial
To use Speed Dial press and release the Talk Button say“Speed Dial X”,
X being 1-9.
Note: Speed Dial only works when you have setup Speed Dial on your Cell Phone.
5) Last Call
You can redial the last phone number. Press and release the Talk Button on
the MV900 and say“Last Call”, you will hear the voice prompt say“Last Call”.
9
6) Group Number Dialing
Group number dialing will allow you to break up the telephone number into
several groups to enter into the MV900. This is especially useful when using a
calling card, or making long distance or international calls.
After each group of numbers entered, the MV900 will voice prompt“Finish?” If
the user replies“Yes”, the MV900 will dial the number that was confirmed. If the
user replies“No”, the MV900 will beep, and then the user can say the next
group of numbers. This process can be repeated until all the numbers have
been entered.
Below is an example that shows you how to use this method to call any number.
Steps
Command
MV900 Voice Prompt
Say Number
1
2
3
4
5
6
7
7
8
9
“Dial Number”
866
866, Finish?
No
Say Number
5553830(zero)
Yes
5553830, Finish?
Dialing
If the MV900 did not recognize the numbers correctly or the user did not reply
in time or the MV900 did not recognize the confirmation command, the MV900
will assume yes then voice prompts“Finish?” In order for the user to re-enter the
group of incorrect numbers, he or she can say“Repeat”to go back and input the
numbers again. Another alternative is to say“Cancel”and start over.
10
7) Entering Touch Tone Numbers
After your call is connected or during an active call, you may need to dial
extension, first press and hold the Talk button and make sure that you hold the
talk button until you hear the voice prompt“Say Extension Number”, release
the talk button and say the extension numbers.
Confirmation Commands Supported
Command
Command Description
Yes
No
Confirm
Repeat or re-enter numbers, enter more
numbers after the voice prompts says“Finish?”
Cancel
Cancel and exit
Extension
Enter extension (only available after entering
numbers by using Voice Keypad)
Repeat
Repeat or re-enter numbers after the voice prompt
says“Finish?”
Voice Keypad (VKP)
Keypad
Keypad Description
0
Number zero (Note: please say“zero”since the
program will only recognize“zero”)
1
2
3
4
5
6
7
8
9
Number one
Number two
Number three
Number four
Number five
Number six
Number seven
Number eight
Number nine
11
12. Setup Menu
The MV900 provides memory slots to use the Voice Command Dialing.
Below is the list of the memory slots:
Number Type Commands in Setup Menu
Command
Command Description
Home
To input home number into the memory
Work
To input work number into the memory
Voicemail Home
Voicemail Work
Voicemail Cell phone
Memory One
Memory Two
Memory Three
Memory Four
Memory Five
Memory Six
To input home voicemail number into the memory
To input work voicemail number into the memory
To input Cell Phone voicemail number into the memory
To input memory one number into the memory
To input memory two number into the memory
To input memory three number into the memory
To input memory four number into the memory
To input memory five number into the memory
To input memory six number into the memory
To input memory seven number into the memory
To input memory eight number into the memory
To input memory nine number into the memory
Memory Seven
Memory Eight
Memory Nine
Note: Each number can be stored with an extension.
To input the number into memory you need to follow theses steps:
1) If the MV900 is not connected to your Cell phone, you can press and hold both the
Mute button and Talk button at the same time until you hear“Setup Menu”. If the MV900
is connected to your Cell phone, you can press and release the Talk Button. Wait for
the voice prompt“Please say command”, then say“Setup menu”.The MV900 will voice
prompt“Setup Menu”.
2) Say the memory slot’s name, for example,“Home”. If there is already a number stored
in this memory slot you will hear the voice prompt say the number. Say“Yes”to keep this
number,“Erase”to erase this number, or“No”to enter new number. If there is no number
in the memory slot, the MV900 will ask you to enter a new number.
3) After you hear voice prompt“Say Number”and the sound of a high pitched tone, say
the number you would like to enter.You will hear the number you’ve just said, then a
voice prompt saying“Finish?”
Note: There is also a 10 second activity timer. If there’s no activity, the device will exit the setup
menu. If there is an incoming call, first exit the setup menu, then follow the incoming call routine.
12
Below are the steps to the ‘Caller ID’setting.The same procedures are used for
‘Prompt’and ‘Power-Save’.
Press and release the Talk Button, say“Setup Menu”, then say“Caller ID”. MV900
will prompt the current mode (ON or OFF). If you say“Yes”, the MV900 will keep
the current settings and the voice prompt will repeat“Set Up”. If you say“No”, the
MV900 will toggle and prompt next option. When you have heard the one you
want, say“Yes”to save.
Setup Option Commands in Setup Menu
Prompt
ON
Voice prompt announcement for an easier operation
OFF
No voice prompt for a faster operation. Recommend for
experienced users after becoming familiar with all commands.
Caller ID
ON
Says the Caller ID for all incoming calls
OFF
Does not say the Caller ID for incoming calls
Power-Save ON
Enable the power save mode while in Bluetooth (This might
create connection lost issue since many Bluetooth phones
do not support this mode)
OFF
Disable the power saved mode, this will guarantee Bluetooth
connection. Factory setting is set to OFF.
Table for numbers stored in MV900’s memory
Number Type
Home
Number
Extension
Work
Voicemail Home
Voicemail Work
Voicemail Cell Phone
Memory 1
Memory 2
Memory 3
Memory 4
Memory 5
Memory 6
Memory 7
Memory 8
Memory 9
13
13. Regulatory Information
This product was tested and complies with the limits for a Class B digital device
under Part 15 of the U.S. Federal Communications Commission (FCC) rules,
and is subject to these conditions: It may not cause harmful interference and
must accept any interference received, including any that causes undesired
operation.These limits are designed to provide reasonable protection against
harmful interference in a residential installation.This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used
in accordance with the instructions, may cause harmful interference to
radio communications.
14. Limited Warranty
mVox Electronics, Inc. warrants the mVox MV900 to be free of defects for a
period of 1 year from the date of purchase. In the event of a defect in material
or workmanship during the warranty period, mVox, at its discretion, will repair or
replace the defective product.
The remedy for this breach of warranty is limited to servicing or replacement
only and shall not cover any other damages, including but not limited to the loss
of profit, special incident, consequential, and other similar claims. In no event will
mVox be liable for any amount greater than the currently suggested retail price.
14
|