NEC Display Solutions of America, Inc.
P60XP10-BK Installation Guide
60” Plasma Monitor
Rev 1.2
Contents:
Product Description and Notes
Tilt Angle and Rotation
Ventilation Requirements
Display Dimensions
Page 1
Page 1
Page 2
Front, Top, Bottom & Right Side
Rear
Cosmetic Colors
Display Dimensions w/Optional Speakers and Stand
Optional Stand Dimensions
Optional Speaker Dimensions
Dimensions w/Optional Wall Mount
Connections
Page 3
Page 4
Page 4
Page 5
Page 6
Page 7
Page 8
Page 9
Page 10
Control Codes
Product Description
Type:
Plasma Monitor
1366x768
16:9
Screen Surface: Anti-Reflective
Resolution:
Aspect Ratio:
Dimensions:
Weight:
56.97”(W) x 34.28”(H) x 5.00”(D)
151.0 lbs
Class B
FCC:
Notes
This document is intended to be used as a reference guide to supply useful information for a design or installation. It is not intended to
be a step-by step procedure for installation.
Any ceilings or walls must be strong enough to support the monitor and the installation must be in accordance with any local
building codes. All mounts should make secure contact to wood studs.
4:3 sources can be displayed on the 16:9 screen in either normal aspect ratio with bars on the left or right, or stretched horizontally to
fill the screen using the menus (see “Aspect Modes” in menus and user manual).
Distances are in inches, for millimeters multiply by 25.4.
Distances may vary ±5%.
Tilt Angle and Rotation
Below are the maximum angles that the monitor can be tilted in the landscape position only.
Do not install in the portrait position.
Landscape 20deg
Max. 20 deg
P60XP10-BK
Page 1 of 10
NEC Display Solutions of America, Inc.
P60XP10-BK Installation Guide
60” Plasma Monitor
Rev 1.2
Display dimensions
54.13
1.40
1.40
51.30
46.85
42.91
40.20
1.34
0.87
1.34
TOP VIEW
FILTER PANEL SURFACE
1.85
53.27
1.85
51.95 (PANEL DISPLAY AREA)
LED
IR
0.51
27.62
56.97
RIGHT SIDE VIEW
3.23
22.89
2.37
0.50
0.33
POWER SWITCH
AC IN
23.72
18.50 (TERMINAL PANEL)
BOTTOM VIEW
P60XP10-BK
Page 3 of 10
NEC Display Solutions of America, Inc.
P60XP10-BK Installation Guide
60” Plasma Monitor
Rev 1.2
Display dimensions (cont.)
27.56
17.52
for MOUNT UNIT
4-M8 Depth 16
Label
for SPEAKER
8-M4
for PC
4-M4 Depth 10
23.78 (STAND)
REAR VIEW
P60XP10-BK
Page 4 of 10
NEC Display Solutions of America, Inc.
P60XP10-BK Installation Guide
60” Plasma Monitor
Rev 1.2
Dimensions with optional speakers and stand
23.78
63.35
3.15
0.04
0.04
3.15
7.97
2.77
18.53
26.55
P60XP10-BK
Page 5 of 10
NEC Display Solutions of America, Inc.
P60XP10-BK Installation Guide
60” Plasma Monitor
Rev 1.2
Optional Stand Dimensions (ST-P60P1)
Table Top Stand
ST-P60P1
0.79
Ø0.39
10.84
15.60
18.50
0.79
1.77
P60XP10-BK
Page 6 of 10
NEC Display Solutions of America, Inc.
P60XP10-BK Installation Guide
60” Plasma Monitor
Rev 1.2
Optional Speaker Dimensions (SP-P60P1)
Optional Speakers
SP-P60P1
2.32
3.15
1.54
0.79
INPUT TERMINAL
0.79
P60XP10-BK
Page 7 of 10
NEC Display Solutions of America, Inc.
P60XP10-BK Installation Guide
60” Plasma Monitor
Rev 1.2
Dimensions with optional Wall Mount Kit (WMK3260-L)
Label
P60XP10-BK
Page 8 of 10
NEC Display Solutions of America, Inc.
P60XP10-BK Installation Guide
60” Plasma Monitor
Rev 1.2
Connections
Speaker Terminal Connections
Located at bottom of display
Control Panel
Power Switch
P60XP10-BK
Page 9 of 10
NEC Display Solutions of America, Inc.
P60XP10-BK Installation Guide
60” Plasma Monitor
Rev 1.2
Control Codes
Function
Code Data
POWER
ON
OFF
01 30 2A 30 41 30 43 02 43 32 30 33 44 36 30 30 30 31 03 18 0D
01 30 2A 30 41 30 43 02 43 32 30 33 44 36 30 30 30 34 03 1D 0D
01 30 2A 30 45 30 41 02 30 30 36 30 30 30 30 31 03 18 0D
01 30 2A 30 45 30 41 02 30 30 36 30 30 30 30 32 03 1B 0D
01 30 2A 30 45 30 41 02 30 30 36 30 30 30 30 33 03 1A 0D
01 30 2A 30 45 30 41 02 30 30 36 30 30 30 30 34 03 1D 0D
01 30 2A 30 45 30 41 02 30 30 36 30 30 30 30 35 03 1C 0D
01 30 2A 30 45 30 41 02 30 30 36 30 30 30 30 36 03 1F 0D
01 30 2A 30 45 30 41 02 30 30 36 30 30 30 30 37 03 1E 0D
01 30 2A 30 45 30 41 02 30 30 36 30 30 30 30 43 03 6A 0D
01 30 2A 30 45 30 41 02 30 30 36 30 30 30 30 44 03 6D 0D
01 30 2A 30 45 30 41 02 30 30 38 44 30 30 30 31 03 62 0D
01 30 2A 30 45 30 41 02 30 30 38 44 30 30 30 30 03 63 0D
01 30 2A 30 45 30 41 02 30 32 31 41 30 30 30 33 03 6E 0D
01 30 2A 30 45 30 41 02 30 32 31 41 30 30 30 34 03 69 0D
01 30 2A 30 45 30 41 02 30 32 31 41 30 30 30 35 03 68 0D
01 30 2A 30 45 30 41 02 30 32 31 41 30 30 30 42 03 1F 0D
01 30 2A 30 45 30 41 02 30 32 31 41 30 30 30 43 03 1E 0D
01 30 2A 30 45 30 41 02 30 32 37 30 30 30 30 31 03 1B 0D
01 30 2A 30 45 30 41 02 30 32 37 30 30 30 30 32 03 18 0D
01 30 2A 30 45 30 41 02 30 32 37 30 30 30 30 33 03 19 0D
01 30 2A 30 45 30 41 02 30 32 37 30 30 30 30 34 03 1E 0D
01 30 2A 30 45 30 41 02 30 32 37 30 30 30 30 42 03 68 0D
01 30 2A 30 45 30 41 02 30 32 37 30 30 30 30 43 03 69 0D
01 30 2A 30 45 30 41 02 30 32 37 30 30 30 30 44 03 6E 0D
01 30 2A 30 45 30 41 02 30 32 37 30 30 30 30 45 03 6F 0D
01 30 2A 30 45 30 41 02 30 30 31 45 30 30 30 31 03 6A 0D
01 30 2A 30 45 30 41 02 30 30 31 45 30 30 30 30 03 6B 0D
01 30 2A 30 45 30 41 02 30 32 32 33 30 30 30 32 03 1E 0D
01 30 2A 30 45 30 41 02 30 32 32 33 30 30 30 31 03 1D 0D
INPUT SWITCH
RGB1 (15pin HD)
RGBHV
DVI
DVD3/HD3 (HDMI)
VIDEO1
VIDEO2
S-Video
DVD1/HD1
DVD2/HD2
ON
AUDIO MUTE
OFF
PICTURE MODE BRIGHT
STANDARD
CINEMA1
CINEMA2
DEFAULT
SCREEN MODE: NORMAL
FULL
ZOOM
DYNAMIC
2.35:1
14:9
UNDERSCAN
TRUE
ON
OFF
ON
OFF
AUTO PICTURE
FILM MODE
NOTE: Contact your NEC rep for codes not listed.
NOTE: Use a cross/reverse/null modem cable.
Cable Connection
Communication Protocol:
Interface:
RS-232C
Parity:
None
Communication: Asynchronous
Stop Bit: 1 bit
Baud Rate:
Data Length:
9600 bps
8 bits
Communication Code: ASCII
PC Control Connector (D-Sub 9P)
NOTE: If so desired, jumper “Request to send” and “Clear to Send” together on both ends of the cable to simplify cable connection.
These connections are not required. The only connections required are pins 2 (RxD), 3 (TxD) and 5 (GND).
P60XP10-BK
Page 10 of 10
|