IMPORTANT INSTRUCTIONS
PLEASE READ AND SAVE THESE IMPORTANT SAFETY INSTRUCTIONS
When using electrical appliances, basic precautions should always be followed in order to
reduce the risk of fire, electric shock, and injury. Carefully read all of the instructions below
before using this heater.
OWNER’S MANUAL
1. This heater is hot when in use. To avoid burns, do not let bare skin touch the heater’s
hot surfaces. Use the provided handles when moving this heater. Keep combustible
materials such as furniture, pillows, bedding, paper, clothes, and curtains at least 3
feet (0.9m) from the front of the heater. Also keep these materials away from the sides
and rear of the heater.
2. Extreme caution is necessary when this heater is used by or near children or invalids
and whenever the heater is left operating unattended.
3. Always unplug the heater when not in use.
4. Do not operate this heater if it has a damaged cord or plug, or after the heater
malfunctions, has been dropped, or damaged in any manner. Return the heater to an
authorized service facility for any repairs or for electrical or mechanical adjustments.
5. Do not use this heater outdoors.
6. This heater is not intended for use in wet or damp locations such as bathrooms or
laundry areas. Never place this heater anywhere where it may fall into or near water.
7. Do not run the power cord under carpeting. Do not cover the power cord with throw
rugs, runners, or similar coverings. Arrange the power cord away from traffic areas
where it will not be tripped over.
8. To disconnect the heater, first turn the controls off, and then remove the plug from the
outlet.
9. Do not insert or allow foreign objects to enter any ventilation or exhaust openings as
this may cause electric shock, fire, or damage to the heater.
10. To prevent a possible fire, do not block the unit’s air intakes or exhaust. Do not use
the heater on soft surfaces (such as beds) where openings may become blocked.
11. This heater may have hot, arcing, or sparking parts inside. Do not use this heater in or
near areas where gasoline, paint, or other flammable liquids are used or stored.
12. Only use this heater as described in this manual. Any other use not recommended by
the manufacturer may cause fire, electric shock, or injury.
13. When possible, avoid the use of extension cords because the cord may overheat and
cause a risk of fire. If extension cords must be used, minimize the risk of overheating
by making sure they are UL listed, a minimum No. 14 AWG, and rated no less than
1875 watts.
14. This heater draws 12.5 amps during operation. To prevent overloading a circuit, do
not plug the heater into a circuit that already has other appliances running.
15. It is normal for the plug to feel warm to the touch; however, a loose fit between the AC
outlet (receptacle) and plug may cause overheating and distortion of the plug. Contact
a qualified electrician to replace loose or worn outlets.
Oil-Filled
Radiator
Heater
Model: AH-450
16. The output of this heater may vary, and its temperature may become intense enough
to burn exposed skin. Use of this heater is not recommended for persons with reduced
sensitivity to heat.
PLEASE READ AND SAVE THESE INSTRUCTIONS
Using the “On” Timer (Example):
CLEANING AND STORAGE
It is recommended that the heater be cleaned at least once during the operating season
for optimum performance. ALWAYS TURN THE POWER SWITCH OFF AND UNPLUG
THE HEATER BEFORE CLEANING. Be sure to save the carton for off-season storage.
1. When the heater is plugged in but not in operation, press the “TIMER” button. The
Indicator Light will display. Press the “TIMER” button to select your desired timer setting
(in sequence of 2H –4H–8H).
2. Press the “TIMER” button and the Indicator Light for 2H will display. Your heater is now
set to be turned on after 2 hours.
•
To clean the heater, first turn the heater to the “OFF” position. Unplug it and
wait for the heater to cool down.
Use a dry cloth to clean only the external surfaces of the heater.
Do not use any cleaning agents or detergents.
Never immerse the heater in water.
Pack the heater in the original carton and store it in a cool, dry place.
Using the “Off” Timer (Example):
1. When the heater is in operation, press the “TIMER” button. The Indicator Light will
display. Press the “TIMER” button to select your desired timer setting (in sequence of 2H –
4H–8H).
2. Press the “TIMER” button and the Indicator Light for 2H will display. Your heater is now
set to be turned off after 2 hours.
•
•
•
•
To disable the timer function, adjust the POWER to the OFF position.
SPECIFICATIONS
Note: Once the timer is set, the heater will automatically operate with this setting in place until the
setting has been turned off or until the unit itself is turned off.
Model No.: AH-450
Voltage: 120V, 60HZ
CAUTION: This heater features an overheat protection feature that shuts the unit off if it
overheats due to abnormal conditions. When this occurs, the “C” (Caution Indicator) light will turn
on. If this occurs, turn the heater “OFF”, unplug it, inspect the unit, and remove any objects on or
adjacent to the heater. Allow the unit to cool for a few minutes, plug it back in, and resume normal
operation.
Current: Maximum continuous draw - 12.5 amps.
Power: HI =1500 Watts, MED = 900 Watts, LO = 600 Watts.
ADDITIONAL FEATURES
This heater also includes the following additional features:
•
Convenient front carrying handles and heavy-duty caster wheels for easy
maneuvering from room to room.
•
Cord storage compartment for neatly storing the power cord when the heater is
not in use.
TROUBLESHOOTING
If your heater fails to operate, please follow these instructions:
•
•
•
Ensure that the circuit breaker or fuse is working properly.
Make sure the heater is plugged in and that the electrical outlet is working properly.
Check for any obstructions in, near, or around the heater. If you find any
obstructions, turn the heater “OFF.” Unplug the heater and wait a few minutes for it
to cool down. Carefully remove the obstruction. Plug the heater in and turn it on
again by referring to the OPERATING INSTRUCTIONS.
NOTE: IF YOU EXPERIENCE A PROBLEM WITH YOUR HEATER, PLEASE SEE THE
WARRANTY INFORMATION FOR INSTRUCTIONS. DO NOT ATTEMPT TO OPEN OR
REPAIR THE HEATER YOURSELF AS DOING SO MAY VOID THE WARRANTY AND
CAUSE DAMAGE OR PERSONAL INJURY. IF THE PROBLEM STILL PERSISTS,
PLEASE CONTACT US BY REFERRING TO THE SERVICE & SUPPORT INFORMATION
SECTION ON THE FOLLOWING PAGE.
|