Operation Manual
Spotter NC 20-60x80
Spotting Scope
105 Sparks Ave., Toronto, ON M2H 2S5, Canada
TABLE OF CONTENTS
1. INTRODUCTION....................................................1
2. SPECIFICATION ....................................................2
3. SPOTTER NC 20-60x80..........................................3
4. DELIVERY SET......................................................4
5. OPERATION INSTRUCTIONS..............................5
6. STARTING OBSERVATION .................................6
7. CARE FOR YOUR SPOTTING SCOPE.................7
8. WARRANTY...........................................................8
9. CUSTOMER SUPPORT..........................................9
10. QUALITY CERTIFICATE....................................10
1. INTRODUCTION
Congratulations on your purchase of a Spotter NC 20-
60x80 spotting scope. The Spotter is an amazing scope
designed for hunting, shooting, wildlife observation and
other outdoor activities.
OPTICAL QUALITY
The Spotter will impress you with its optical excellence,
featuring Broadband fully multi-coated optics for bright,
detailed images.
CAUTION:
Spotting scopes are not intended for looking at the sun, or
any other intense light source. Such viewing could
damage the retina and cornea of your eyes—even to the
point of causing blindness.
1
2. SPECIFICATION
Magnification Range
Objective lens diameter
Prism
20-60 x
80 mm
BAK 4
Coating
MC
FOV @1000 m
FOV @1000 yd
Eye relief
30-15 m
89-44 ft
18 – 15 mm
1300 g
Weight
Dimensions, mm
335x170x95
2
3. SPOTTER NC 20-60x80
F
K
L
D
B
C
E
G
H
A
3
4. DELIVERY SET
Q-ty
Spotting Scope
1
2
1
1
1
1
Objective lens cover
Sliding dew shield to reduce glair
Carrying case and tripod
Manual
Universal Digital Adapter (optional)
4
5. OPERATION INSTRUCTIONS
SET UP AND MOUNTING
1) Spread the tripod legs (A) and set the tripod on a firm
support. Loosen the adjustment screw (B) to place
mounting platform (C) in horizontal position, then
rotate the screw to lock mounting platform.
2) Position mounting shoe (D) of the spotting scope
body on the platform (C) then tighten mounting
screw (E) to firmly lock spotting scope body on the
platform.
3) Remove protective lens cap (F) on the objective (G)
lens.
5
6. STARTING OBSERVATION
USAGE WITH FIXED POWER EYEPIECE
1. Loosen the adjustment screw (H) and point your
scope objective lens to the target you want to view.
2. Adjust the focus knob (K) until you get the clear
image from your eyepiece lens.
USAGE WITH ZOOM EYEPIECE
1. Loosen the adjustment screw (H) and point your
scope objective lens to the target you want to view.
2. Rotate the zoom ring (L) of the eyepiece to the
lowest magnification.
3. Adjust the focus knob (K) until you get the clear
image from your eyepiece lens.
4. Rotate the zoom ring (L) to the desired magnification
and re-focus with focus knob (K) if necessary.
6
7. CARE FOR YOUR SPOTTING
SCOPE
To clean the lenses, use a soft bristle brush to
whisk off dust and dirt and then use soft cloth
moisture with alcohol. Wipe lenses from center
outward and avoid touching the lens, as
fingerprints will smear the lens.
To clean body parts, use a soft cloth with warm
water and a mild soap to remove dirt.
Do not dismantle the spotting scope or the
eyepieces. If they need repair or adjustment,
please contact the dealer in your country.
7
8. WARRANTY
NEWCON warrants this product against defects in
material and workmanship for one year from the date of
the original purchase. Longer warranty is available,
subject to the terms of the specific sales contract. Should
your product prove to be defective during this period,
please deliver the product securely packaged in its
original container or an equivalent, along with the proof
of the original purchase date.
Newcon will repair (or at its option replace with the same
or comparable model), the product or part thereof, which,
on inspection by Newcon, is found to be defective in
materials or workmanship.
What This Warranty Does Not Cover:
NEWCON is not responsible for warranty service should
the product fail as a result of improper maintenance,
misuse, abuse, improper installation, neglect, damage
caused by disasters such as fire, flooding, lightning,
improper power supply, or service other than by a
NEWCON Authorized Service.
Postage, insurance, and shipping costs incurred while
presenting your product for warranty service are your
responsibility.
8
9. CUSTOMER SUPPORT
Should you experience any difficulties with your
NEWCON OPTIK product, consult the enclosed manual.
If the problem remains unresolved, contact our customer
support department at (416) 663-6963 or toll free at 1-
877-368-6666. Our operating hours are 9am-5pm,
Monday - Friday, Eastern Standard Time.
At no time should equipment be sent back to Newcon
without following the instructions of our technical support
department.
NEWCON OPTIK accepts no responsibility for
unauthorized returns.
To locate NEWCON Authorized Dealer call:
Tel: (416) 663-6963 Fax: (416) 663-9065
Email: [email protected]
Defective products should be shipped to:
From the USA only:
2498 Superior Ave. Cleveland, OH 44114 USA
From all other countries:
105 Sparks Ave., Toronto, ON M2H 2S5, CANADA
9
10. QUALITY CERTIFICATE
Spotter NC 20-60x80
Complies with all technical specifications and has passed
the inspection.
Date of production:
_________________________________
Quality Inspector:
__________________________________
Quality Assurance Seal
10
11
12
NEWCON OPTIK
Printed in Canada
13
|