NuVision Tablet Accessory KBT10 User Manual

Step 4: Use the keyboard to enter the password code as  
displayed on screen; then press enter.  
Step 5: When the keyboard has connected successfully,  
the Bluetooth indicator light will turn off.  
7. Function Keys  
10) Charge time: <2 hours  
KBT10 v2  
Hold the [Fn] key while selecting the desired special keys.  
11) Lithium battery capacity: 180mAh  
12) Operating time: Up to 40 hours  
13) Lithium battery life: Up to two years  
14) Key Strength: 80 +/- 10g  
KBT10 Keyboard Case Instruction Sheet  
1. Controls  
4. Charging the Bluetooth Keyboard (TM1088)  
When battery power is running low the power light will begin  
to blink indicating that you need to recharge the keyboard.  
Step 1: Attach the long USB cable (included with this  
keyboard) to the short transfer cable (included with the  
tablet).  
15) Working temperature: -10 - +55 C  
Slide switch to turn keyboard off or on.  
10. Safety Precaution  
1) Keep the keyboard away from sharp objects.  
2) Do not place heavy objects on the keyboard.  
3) Do not expose the keyboard to microwaves.  
4) Do not apply undue force or pressure on the keyboard.  
5) Keep keyboard away from oil, chemicals or any other organic  
liquids.  
6) Warning: This product may contain a chemical known to  
the State of California to cause cancer, birth defects, or other  
reproductive harm.  
Press the Bluetooth connect button to establish wireless  
keyboard connection with tablet PC.  
2. Keyboard Indicator Lamp (TM1088)  
Step 2: Connect the long USB cable to the keyboard’s USB  
port and the other end to the tablet.  
NOTE: Tablet must be powered on to charge the keyboard.  
If battery level on the tablet is low, plug in AC power adapter  
to recharge.  
Battery Status Light: Slide the OFF/ON button to ON.  
The power light will illuminate for 3 seconds. The keyboard  
will remain on although the light will disappear.  
Bluetooth Status Light: Press the “Connect” button and the  
Bluetooth status light will be flash. This indicator light will  
stay on until the keyboard connects to your device.  
TABLET  
11. Cleaning  
Clean the keyboard with water, diluted alcohol or light cleaning  
solution.  
Caps Lock Indicator: Indicator lamp is lit when the  
keyboard is set to uppercase text mode.  
8. Product Features:  
1) Bluetooth wireless keyboard  
2) Protective leather case with integrated kickstand  
3) Micro USB interface for easy recharging  
4) Long lasting, built-in rechargeable lithium battery  
5) Light weight, quiet keystrokes, water-proof, dust-proof design  
6) Energy saving sleep mode  
12. Troubleshooting  
Charging Light: When the keyboard is charging, the  
charging indicator illuminates red. When fully charged,  
the red indicator will turn off.  
A. Unable to Connect  
1) Make sure the keyboard is on (the power indicator ON).  
2) Make sure the keyboard is in within the proper operating  
distance of 30 feet.  
5. Battery  
The long-lasting lithium ion rechargeable battery will provide  
many hours of service with no “memory effect”. So the battery  
can be recharged at any time. We recommend that you turn the  
keyboard off during long periods of inactivity.  
3. Connecting the Keyboard to the Tablet (TM1088)  
Step 1: Turn the power toggle switch to the ON position.  
The indicator light will stay on for about five second then will  
turn off.  
3) Make sure the battery is recharging properly (the power  
indicator is red when keyboard is connected to power).  
4) Make sure the Bluetooth setting on the tablet PC is on.  
5) Press the key “Connect” to establish Bluetooth connection.  
B. Unable to Charge Keyboard  
9. Keyboard Specification  
1) Bluetooth interface standard  
2) Operating distance up to 30 feet  
3) Modulation system: GFSK  
4) Operation voltage: 3.0-5.0v  
5) Operating current: <2.5mA  
6) Standby current: <0.3mA  
7) Sleep current: <40uA  
6. Energy Saving Sleep Mode  
Step 2: Press the Connect button. The Bluetooth indicator light  
will blink. The keyboard is now ready to connect to the tablet  
computer.  
Step 3: On the tablet, select SETTINGS > Bluetooth > ON.  
The tablet will automatically search for Bluetooth compatible  
devices. When the Bluetooth Keyboard is recognized, tap or  
click to connect.  
The keyboard automatically enters an idle, or sleep mode, when  
it is inactive for 15 minutes. At that time, the keyboard power will  
turn off. To resume normal operation, or wake up the keyboard  
from sleep mode, press any key and wait about three seconds  
for the keyboard to reset.  
1) Make sure the USB power cable is connected properly  
to the keyboard and the power source.  
2) Make sure the wall charger is plug into the power  
outlet. NOTE: The output voltage and current of the  
power adapter cannot exceed DC5.0V, 500mA or it  
may damage the keyboard.  
8) Charge current: =>200mA  
9) Standby time: >40 days  
 

Miele Cooktop 6203 User Manual
NETGEAR Network Router WNDR4500v3 User Manual
Nissan Automobile Z12 D User Manual
Nokia Bluetooth Headset BH 904 User Manual
NordicTrack Treadmill NTTL25512 User Manual
Oki Printer 5800dn User Manual
Optoma Technology Projector EP 719 User Manual
Palsonic Flat Panel Television PDP 5000 User Manual
Panasonic Cordless Drill EY7440 U1 User Manual
Panasonic Fax Machine DP 8025 User Manual