Omega Engineering Thermometer OS523E User Manual

QUICK START  
WARRANTY/DISCLAIMER  
5
6
OMEGA ENGINEERING, INC. warrants this unit to be free of defects in  
materials and workmanship for a period of 25 months from date of  
purchase of the base unit and 13 months from date of purchase on  
Laser Sight Module. OMEGA’s WARRANTY adds an additional one (1)  
month grace period to the normal one (1) year product warranty to  
cover handling and shipping time. This ensures that OMEGA’s  
customers receive maximum coverage on each product.  
MODE DISPLAY  
DISPLAY  
MODE  
Functional Flow Chart when the Trigger is Pulled (Real Time Mode)  
LCK  
OS530LE  
OS532E  
OS533E  
OS534E  
L
CK  
HAL  
TM  
If the unit malfunctions, it must be returned to the factory for evaluation.  
OMEGA’s Customer Service Department will issue an Authorized Return  
(AR) number immediately upon phone or written request. Upon  
examination by OMEGA, if the unit is found to be defective, it will be  
repaired or replaced at no charge. OMEGA's WARRANTY does not apply  
to defects resulting from any action of the purchaser, including but not  
limited to mishandling, improper interfacing, operation outside of design  
limits, improper repair, or unauthorized modification. This WARRANTY is  
VOID if the unit shows evidence of having been tampered with or shows  
evidence of having been damaged as a result of excessive corrosion; or  
current, heat, moisture or vibration; improper specification;  
misapplication; misuse or other operating conditions outside of  
OMEGA’s control. Components in which wear are not warranted, include  
but are not limited to contact points, fuses, and triacs.  
FUNC  
FUNC  
(Models OS530LE,  
OS530HRE)  
LCK  
OS530HRE  
OS53x-CF  
OS523E  
LCK  
Shown with  
*
*
*
*
*
*
*
Built-in Distance  
Measuring Option  
and Digital Video  
Camera Attachment  
FUNC  
FUNC  
OS524E  
OMEGASCOPE  
(Model OS532E)  
LCK  
®
LCK  
Handheld Infrared  
Thermometer  
OMEGA is pleased to offer suggestions on the use of its various  
products. However, OMEGA neither assumes responsibility for any  
omissions or errors nor assumes liability for any damages that  
result from the use if its products in accordance with information  
provided by OMEGA, either verbal or written. OMEGA warrants  
only that the parts manufactured by the company will be as  
specified and free of defects. OMEGA MAKES NO OTHER  
WARRANTIES OR REPRESENTATIONS OF ANY KIND  
WHATSOEVER, EXPRESSED OR IMPLIED, EXCEPT THAT OF TITLE,  
AND ALL IMPLIED WARRANTIES INCLUDING ANY WARRANTY OF  
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE  
ARE HEREBY DISCLAIMED. LIMITATION OF LIABILITY: The  
remedies of purchaser set forth herein are exclusive, and the total  
liability of OMEGA with respect to this order, whether based on  
contract, warranty, negligence, indemnification, strict liability or  
otherwise, shall not exceed the purchase price of the component  
upon which liability is based. In no event shall OMEGA be liable for  
consequential, incidental or special damages.  
LAL  
FUNC  
FUNC  
LCK  
LCK  
ATC  
FUNC  
For latest product manuals: omegamanual.info  
FUNC  
LCK  
SM  
OMEGAnet On-Line Service  
Internet e-mail  
omega.com  
LCK  
PRN  
Servicing North America:  
One Omega Drive, P.O. Box 4047  
Stamford CT 06907-0047  
Tel: (203) 359-1660  
FAX: (203) 359-7700  
FUNC  
USA:  
ISO 9001 Certified  
CONDITIONS: Equipment sold by OMEGA is not intended to be used, nor  
shall it be used: (1) as a “Basic Component” under 10 CFR 21 (NRC), used in  
or with any nuclear installation or activity; or (2) in medical applications or  
used on humans. Should any Product(s) be used in or with any nuclear  
installation or activity, medical application, used on humans, or misused in  
any way, OMEGA assumes no responsibility as set forth in our basic  
WARRANTY/DISCLAIMER language, and, additionally, purchaser will  
indemnify OMEGA and hold OMEGA harmless from any liability or damage  
whatsoever arising out of the use of the Product(s) in such a manner.  
FUNC  
LCK  
(Model OS533E)  
Canada:  
976 Bergar  
LCK  
FUNC  
Laval (Quebec) H7L 5A1  
Tel: (514) 856-6928  
FAX: (514) 856-6886  
LCK  
FUNC  
RETURN REQUESTS/INQUIRIES  
For immediate technical  
or application assistance:  
Sales Service: 1-800-826-6342/1-800-TC-OMEGA  
Customer Service: 1-800-622-2378/1-800-622-BEST  
Direct all warranty and repair requests/inquiries to the OMEGA Customer  
Service Department. BEFORE RETURNING ANY PRODUCT(S) TO OMEGA,  
PURCHASER MUST OBTAIN AN AUTHORIZED RETURN (AR) NUMBER  
FROM OMEGA’S CUSTOMER SERVICE DEPARTMENT (IN ORDER TO  
AVOID PROCESSING DELAYS). The assigned AR number should then be  
marked on the outside of the return package and on any correspondence.  
(Models  
FUNC  
OS534E,  
OS523E,  
OS524E)  
on  
®
USA and  
Canada:  
LCK  
®
®
Engineering Service: 1-800-872-9436/1-800-USA-WHEN  
FUNC  
OS530LE, OS530HRE  
OS532E  
Mexico:  
En Espan˜ol: (001) 203-359-7803  
FAX: (001) 203-359-7807  
CAUTION  
FOR NON-WARRANTY REPAIRS,  
consult OMEGA for current repair  
charges. Have the following  
information available BEFORE  
contacting OMEGA:  
1. Purchase Order number to cover  
the COST of the repair or  
calibration,  
2. Model and serial number of the  
product, and  
3. Repair instructions and/or specific  
problems relative to the product.  
FOR WARRANTY RETURNS,  
please have the following  
information available BEFORE  
contacting OMEGA:  
1. Purchase Order number under  
which the product was  
PURCHASED,  
2. Model and serial number of  
the product under warranty, and  
3. Repair instructions and/or  
specific problems relative to  
the product.  
OS533E  
OS534E, OS523E, OS524E  
• There should be a clean, open line of sight from the distance device to the  
target, otherwise an erroneous reading will result.  
• For accurate distance measurement readings, the surface must be hard,  
flat, and reflective to ultrasonic pulse.  
• Distance measurement can not be taken through glass, or off of soft and  
padded surfaces, or through smoke or fog.  
• The distance measurement unit must be held perpendicular to the target  
surface.  
It is the policy of OMEGA to comply with all worldwide safety and EMC/EMI  
regulations that apply. OMEGA is constantly pursuing certification of its products to  
the European New Approach Directives. OMEGA will add the CE mark to every  
appropriate device upon certification.  
Servicing Europe:  
Rudé armády 1868, 733 01 Karviná 8  
Tel: +420 (0)69 6311899  
FAX: +420 (0)69 6311114  
Toll Free: 0800-1-66342  
Czech  
Republic:  
The information contained in this document is believed to be correct but OMEGA  
Engineering, Inc. accepts no liability for any errors it contains, and reserves the right  
to alter specifications without notice.  
Germany/  
Austria:  
Daimlerstrasse 26, D-75392 Deckenpfronn, Germany  
Tel: +49 (0)7056 9398-0  
FAX: +49 (0)7056 9398-29  
Toll Free in Germany: 0800 639 7678  
One Omega Drive, River Bend Technology Centre  
Northbank, Irlam, Manchester  
M44 5EX United Kingdom  
Tel: +44 (0)161 777 6611  
FAX: +44 (0)161 777 6622  
Toll Free in United Kingdom: 0800-488-488  
WARNING: These products are not designed for use in, and should not be used for,  
• The distance measurement unit is designed for indoor use only.  
• Accuracy of the distance measurement unit will vary depending on  
environmental conditions.  
patient connected applications.  
OMEGA’s policy is to make running changes, not model changes,  
whenever an improvement is possible. This affords our customers the  
latest in technology and engineering.  
PATENT NOTICE This product may be protected by one or more of the  
following patents: U.S. PAT. D357,194; B1 5,368,392; 5,524,984; 5,727,880;  
5,465,838; 5,823,678; 5,823,679; 6,123,453; 6,267,500 B1; 6,341,891 B1; 6,377,400  
B1; 6,540,398 B2 ; 6,614,830 B1; 6,633,434 B2; 6,659,639; / Canada 2,114,806;  
• Do not aim the distance measurement unit.  
OMEGA is a registered trademark of OMEGA ENGINEERING, INC.  
United  
Kingdom:  
ISO 9002 Certified  
© Copyright 2007 OMEGA ENGINEERING, INC. All rights reserved.  
This document may not be copied, photocopied, reproduced, translated, or  
reduced to any electronic medium or machine-readable form, in whole or in  
part, without the prior written consent of OMEGA ENGINEERING, INC.  
®
2,116,055; 75811  
D
OMEGA ENGINEERING, INC./ Czech Republic 25372/ France 2  
Warning and  
Certification  
Label  
CAUTION  
OMEGASCOPE  
756 920; 2 767 921; 2,773,213; 0378411 to 0378446; 2 773 213 B1 / Germany M 94  
06 478.4; G 94 22 197.9; G 94 22 203.7/ Italy RM940000913/ Japan 988,378/Holland  
1007752; 25009-00/ Spain mod. ut. 0133292/ Slovak Republic 24565/ U.K.  
Registered 2041153; 9726133.3/ EPO 0 644,408 B2; EP 1 085 307 A1. Other U.S. and  
Foreign Patents Pending. Other U.S. and International Patents Pending.  
LASER RADIATION - DO NOT STARE INTO BEAM  
OUTPUT <1 mW, WAVELENGTH 630-670 nm  
CLASS II (2) LASER PRODUCT, COMPLIES  
WITH FDA 21CFR 1040.10 & EN60825-1/11.2001  
MQS4088-0207  
 

Multiquip Portable Generator TLG12SPX User Manual
Multiquip Window HTN 27K TCSL User Manual
NEC Video Game Console EA221WME User Manual
New Holland Lawn Mower 472 User Manual
Nikon Camcorder AF S User Manual
NordicTrack Home Gym NTL190071 User Manual
NuTone Ventilation Hood RF 49NR User Manual
Oki Printer 6150 User Manual
Omega Vehicle Security Network Card OMG COMM232 PCI User Manual
Panasonic Computer Monitor JS 950WS User Manual