HPP-600
Pneumatic Hand Pump
M4673/0508
INSTRUCTION
SHEET
For latest product manuals: omegamanual.info
Volume Control
The HPP-600 pump is equipped with two knobs for fine adjustment of the system
pressure. The vent knob can be used to slowly reduce the system pressure. The
vent knob should be closed prior to pressurizing the system by turning the knob
away from the pump housing. The Vernier knob can be used to increase or
decrease the system at a more controlled rate. For fast relieve of the pressure,
move the pressure/vacuum pin to the opposite direction.
Pressure/Vacuum Selector
The pump can be used to generate pressure or vacuum depending on the position
of the pin located in the pressure/vacuum switch. Press the pin on the side of the
pump housing according to labels for the desired operation.
|