Panamax Home Theater System MAX 5100 PM User Manual

LOOKING FOR CRYSTAL CLEAR PICTURE AND SOUND?  
Clean Power Level 3  
Improves picture and sound quality by elimi-  
nating noise across the entire AC bandwidth.  
60% more efficient at eliminating noise than  
single stage linear filtration (Level 2).  
MAX® 5100-PM  
3 Isolated Outlet Banks  
Isolating outlet banks from one another  
HOME THEATER POWER MANAGEMENT  
prevents noise contamination between  
components.  
Improves Picture and Sound Quality  
1
Level 3 Power Cleaning and Linear Filtration  
eliminates common symptoms of contaminated power  
(including loss of detail, pops, hisses, hums and visual  
artifacts) and allows your A/V equipment to perform up  
to its full capability..  
High Current Outlets  
2 outlets for equipment with high power  
demands (Amps/Subwoofers).  
USB Charger  
Convenience charger for mp3 players, cell  
phones, and other small electronics.  
Monitors Incoming Line Voltage and Provides a  
Visual Indication of Power Level  
2
Gaming LAN Port  
Easy access to LAN port on front panel.  
Perfect for online gaming.  
Panamaxs patent pending AVM™ circuitry continuously  
monitors the incoming power as displayed on the digital  
voltmeter. In case of an undervoltage or an overvoltage,  
a flashing lightning bolt will be displayed in red in the  
voltmeter, and power to the connected equipment is  
automatically turned off if either of these conditions is  
detected. When voltage returns to a safe level, power to  
the equipment is automatically reconnected.  
Digital Volt Meter  
Monitor the voltage supplying your home  
theater equipment.  
12 Volt Trigger  
Allows source equipment to activate or  
deactivate the outlets on the M5100-PM.  
Power Sequencing  
Guards against blown fuses and potentially  
damaging speaker thump by automatically  
powering outlets on and off in sequence.  
Reduces Cross-Contamination Between Components  
The M5100-PM is designed to provide noise isolation  
between 3 isolated outlet banks including 2 high current  
outlets so that any noise created by an A/V component  
can not contaminate the power going to equipment  
plugged into another outlet bank.  
3
11 Outlets  
5 Always On, 4 Switched, 2 Switched High  
Current.  
AVM (Automatic Voltage Monitoring)  
Protects equipment against prolonged over/  
under voltages by disconnecting the power  
and reconnecting it when safe power returns.  
 

MTD Trimmer MP426CS User Manual
Navman GPS Receiver iCN700 User Manual
Nextar MP3 Player MA323 User Manual
Oreck Vacuum Cleaner David User Manual
Oregon Scientific Speaker IB368 User Manual
Oster Blender FPSTFP4263 DFL User Manual
Panasonic Fax Machine KX FC248HK User Manual
Panasonic Projector PT D5600E User Manual
ParaBody Home Gym 895101 User Manual
Parkside Engraver PGG 15 A1 User Manual