Panasonic Cell Phone EB GD93 User Manual

Operating Instructions

EB-GD93

Digital Cellular Telephone

Before operating this equipment please read these instructions completely.

Contents

Getting Started . . . . . . . . . . . 1

Changing the Language. . . . 19

Fitting the SIM . . . . . . . . . 1

Fitting the Battery . . . . . . . . 1

Charging the Battery . . . . . . 2

Getting to Know Your Phone . . 3

Restoring the Default Phone

Settings . . . . . . . . . . . . 20

Phone Security . . . . . . . . . . 21

Using Key Guard . . . . . . . 21

Changing the Security Codes . 21

Restricting Calls . . . . . . . . 22

Basic Operation. . . . . . . . . . . 6

Switching the Phone On/Off . . 6

Making a Call . . . . . . . . . . 6

Automatic Redial . . . . . . . . 7

Ending a Call . . . . . . . . . . 7

Answering a Call . . . . . . . . 7

Earpiece Volume Control . . . . 7

Locking the Phone . . . . . . . 8

Using the PIN . . . . . . . . . . 8

Setting Vibration Alert. . . . . . 9

Setting Ring and Key Volume . 9

Applications . . . . . . . . . . . . 23

Clock . . . . . . . . . . . . . 23

Calculator . . . . . . . . . . . 25

Currency Convertor . . . . . . 25

Short Text Messages . . . . . . . 27

Setting the Phone for Text

Messages . . . . . . . . . . . 27

Sending a Text Message . . . 27

Receiving Text Messages . . . 28

Message Options . . . . . . . 28

Using Pre-defined Messages . 28

Manage Messages Lists. . . . 29

Message Parameters . . . . . 30

Cell Broadcasts . . . . . . . . 30

Phonebook. . . . . . . . . . . . . 10

Store a Number . . . . . . . . 10

Browsing Phonebook . . . . . 11

Retrieve a Number . . . . . . 11

Editing Phonebook Entries . . 11

Grouping Phonebook Entries . 12

Using Alert Profiles . . . . . . 13

Personal Dial . . . . . . . . . 13

Hot Key Phone Numbers . . . 14

Service Dial Numbers . . . . . 14

Review the Phonebook . . . . 14

My Numbers. . . . . . . . . . 15

Call Information . . . . . . . . . . 32

Recent Numbers . . . . . . . 32

Call Duration. . . . . . . . . . 32

Call Charges. . . . . . . . . . 33

Call Identification . . . . . . . 33

Advanced Operation . . . . . . . 34

Diverting Calls . . . . . . . . . 34

Holding Calls and Call Waiting 34

Call Transfer. . . . . . . . . . 35

Multi-party Calls . . . . . . . . 35

Changing to a New Network. . 37

Personalising Your Phone . . . . 16

Add a Start-up Greeting . . . . 16

Displaying Animations. . . . . 16

Changing the Ring Tone . . . 16

Disabling all Tones . . . . . . 18

Setting the Backlight Colour. . 18

Disabling Key Backlight . . . . 18

Disabling Back Case Light . . 18

Using Voice Commands. . . . 18

Selecting Vibration Alert Type. 19

WAP Browser . . . . . . . . . . . 38

Server Settings . . . . . . . . 38

Activating the Browser. . . . . 38

Navigating Content . . . . . . 39

The Browser Menu . . . . . . 39

Using Bookmarks . . . . . . . 40

Deactivating the Browser . . . 40

Setting the Linger Time . . . . 40

Last Error . . . . . . . . . . . 40

Internet E-mail . . . . . . . . . . . 41

E-mail Setup. . . . . . . . . . 41

Create a New Message . . . . 41

Send/Receive Messages . . . 42

Read Messages . . . . . . . . 42

Store an Address . . . . . . . 43

Add a Signature . . . . . . . . 43

Manage Message Stores . . . 43

Additional Features . . . . . . . . 44

Desktop Handsfree . . . . . . 44

Voice Memo . . . . . . . . . . 44

Dicta Phone . . . . . . . . . . 45

DTMF Tones . . . . . . . . . 46

Note Pad . . . . . . . . . . . 46

Second Clock . . . . . . . . . 47

Accessory Related Features . 47

Text Entry . . . . . . . . . . . . . 48

Menu Structure . . . . . . . . . . 50

Trouble Shooting . . . . . . . . . 51

Important Error Messages. . . 52

Important Information. . . . . . . 54

Safety Considerations . . . . . 54

Care and Maintenance . . . . . . 56

Glossary of Terms. . . . . . . . . 57

Specifications . . . . . . . . . . . 58

Getting Started

Thank you for purchasing this Panasonic digital cellular phone. This phone is

designed to operate on the Global System for Mobile Communications (GSM),

GSM900 or GSM1800. Ensure the battery is fully charged before use.

Before operating this phone please read the “Important Information” section -

see page 54.

These operating instructions detail use of the equipment contained in the Main Kit.

Some services detailed herein are network dependent or may only be available on a

subscription basis. Some functions are SIM dependent. For more information contact

your Service Provider.

Fitting the SIM

The SIM is inserted into the back of the

phone underneath the battery.

Place the SIM in the recess at the rear

of the phone (1) ensuring the bevelled

corner is positioned in the top right

corner. Slide the SIM to the left (2) using

light pressure until it is located under the

lugs and the SIM retaining clip has

clicked into position (3).

Removing the SIM

Ensure the SIM retaining clip is pressed

down (1) and while holding this down

slide the SIM to the right (2). Once clear

of the lugs the SIM can be lifted out of

the recess.

Fitting the Battery

Fit a fully charged battery pack. If the

battery pack is not fully charged then it

must be charged as described in the

“Charging the Battery” section.

Locate the top of the battery into the

rear of the phone (1). Push the bottom

of the battery into place until it locks into position (2).

Getting Started

Removing the Battery

Push the battery release latch down (1).

The base of the battery will raise out of

the recess (2). The battery can now be

removed from the phone (3).

Charging the

Battery

Connecting the AC

Adaptor

The battery pack must be attached to

the phone before the AC Adaptor is

connected. Insert the AC Adaptor plug

into the base of the phone (1).

Note: DO NOT force the connector as

this may damage the phone and/or the

AC Adaptor.

Connect the AC Adaptor to the mains power supply (2). Indicator will light and

charging starts.

Operation of Battery Level Indicator

While charging

Charging complete

Telephone on

Telephone off

Indicator off

When charging is complete remove the AC Adaptor.

Disconnecting the AC Adaptor

Disconnect the AC Adaptor from the

mains power supply (1).

Squeeze together the two buttons on

the plug of the AC Adaptor (2) and while

maintaining pressure extract the plug

from the base of the phone (3).

Getting Started

Low Battery Warning

When the battery power is low a warning tone will sound and a

blinking LOW BATTERY message will be displayed. If this

occurs during conversation finish your call immediately. The

power will be automatically shut off shortly after the warning

tone. Fully charge the battery pack or replace it with a fully

charged one.

Getting to Know Your Phone

Location of Controls

Antenna

Incoming/Charging

Indicator

Earpiece

Memo Key

Earphone/Microphone Socket

1 2 3

4 5 6

7 8 9

* 0 #

External Connector

Display

Microphone

Navigation key – pressing up/down/left/right scrolls through options in the

main area of the display. Pressing left/right scrolls through options in the

option area of the display

Select key – selects an option in the option area of the display

accesses Phonebook or switches character types

provides instant access to one phone number (Personal Dial). Also

provides shortcut to WAP Browser.

makes a call or recalls recently dialled phone numbers

clears the last digit entered, clears all digits when pressed and held or

returns to the previous display

ends a call or switches the phone on/off when pressed and held

Records and plays back recorded memos

Digit keys

and

– the

key will switch on and off

vibration alert

Getting Started

The Menu System

The menu system provides the means for accessing all the functions which do not

have their own dedicated buttons on the keypad.

The menu functions can be selected using a combination of the Navigation key

and the menu Select key

During a call a restricted menu will be available.

Shortcuts

In addition, once you are familiar with the layout of the menu you can use the keypad

to enter the Menu Number to quickly obtain the required function. For example,

pressing

to enter the menu and then 52will take you directly to the menu

for changing the ring tone. Examples in these instructions use the shortcuts to gain

access to the relevant functions or to the sub-menu under which other functions are

located.

Display Icons

Status Icons

Main Display Area

Option Area

Information Area

Navigation Prompt

Following some operations the display will automatically clear after three seconds or

after pressing any key.

Status Icons

The status icons are displayed according to the currently activated functions. The

Antenna, Signal and Battery icons are always displayed when the handset is

switched on and connected to a network.

lights when you are registered to a non-home network - roaming

lights when call divert is enabled

]

[

lights when vibration alert is enabled

lights when all tones or ring volume is off

blinks when an unread message is stored or lights when message area is

full

lights when phone lock is enabled

Getting Started

indicates that it is possible to make emergency calls

indicates the received signal strength:

- weak signal,

- strong

signal

indicates the battery level:

- full,

(blinking) - low battery

Information Area

This area is used to indicate the current top level menu, the sub-menu number, text

entry mode, Phonebook source, Phonebook location number, or the alarm set icon

depending on the current mode of operation.

indicates alarm is set

indicates current Phonebook entry is sourced from Mobile Phonebook

indicates current Phonebook entry is sourced from SIM Phonebook

Navigation Prompt

This area indicates the available directions in which the Navigation Key

can be pressed according to the current mode of operation.

Option Area

The Option Area displays the options which can be selected by pressing the Select

key (B).

Basic Operation

Switching the Phone On/Off

To switch the phone on or off.

Press and hold

to switch power on

A greeting animation will be displayed and then the phone will

go into Idle mode.

Press and hold

to switch power off

Making a Call

Ensure that the phone is switched on, the network operator

logo is displayed and the signal strength meter shows network

coverage is available in the current area.

Enter area code and phone number

Press

International Dialling

Using the automatic international access code (+) you will be able to dial international

numbers without having to know the code for the international exchange.

If the international number is known then it can be entered in the normal fashion

followed by the area code and phone number.

Press and hold

Press to cycle through the abbreviated international

names and press to select the required code

Enter area code and phone number

Press

until + is displayed

Note: Many countries include an initial “0” in the area code. This should, in most

cases, be left out when dialling international numbers. If you have difficulties making

international calls, contact your Service Provider.

Emergency Calls

To make an emergency call the antenna symbol (

S) must be present.

Enter 112Dor press when SOS is displayed in the option area

Basic Operation

Automatic Redial

When a call is unsuccessful the phone may ask if you want to

redial the phone number again automatically.

Press

when Ok is displayed in the option area and

the display will countdown in seconds to the next redial.

To stop redialling, press

the option area or press

when Cancel is displayed in

When a call is connected a beep will be emitted.

If a call is repeatedly unsuccessful you will not be able to automatically redial the

phone number. In this case you must redial the phone number manually.

Ending a Call

Press

Answering a Call

To receive a call the phone must be switched on and the signal strength meter must

be displayed.

Press any key except

Press to reject the call

If a call is not answered, or is rejected, the number of unanswered calls will be

displayed.

Press any key to clear the display

Caller Identification

This feature allows you to identify incoming calls and accept

or reject them. The caller’s phone number, and name if stored

in Phonebook, will be displayed.

Note: Caller Identification may not always be available.

Earpiece Volume Control

The volume level may be adjusted during a call:

Press

to decrease the volume

to increase the volume

Volume control for Personal Handsfree accessory is adjusted

in the same manner.

Basic Operation

Locking the Phone

With the Phone Lock enabled you will be restricted to answer incoming calls and

make emergency calls only. The Phone Lock Code is factory set to “0000”.

From Idle mode press B 81to enter the Phone

Lock menu

Press

Enter the 4-digit code and press

The phone will be locked and the lock icon (

displayed.

O) will be

Unlocking the Phone

To restore normal operation, enter your Lock Code and press

B. The lock icon will

be removed from the display. However, once you turn the phone off and on again you

will need to re-enter the Lock Code, and when the correct code has been entered Ok

will be displayed. Press

Disabling Phone Lock

From Idle mode press B 8to enter the Security menu.

Press

until Disable is displayed in the option area

Enter the Lock Code and press

Using the PIN

The PIN (Personal Identification Number) protects your SIM against unauthorized

use. If you enable the PIN, every time the phone is turned on you will be prompted to

enter the PIN.

The PIN2 controls security for the Fixed Dial Store and Call Charge metering.

Enabling/Disabling the PIN

From Idle mode press B 83to enter the PIN menu

Press to enable/disable the PIN

Enter PIN number

Basic Operation

Setting Vibration Alert

When vibration alert is switched on the phone will vibrate when a call is received.

Switching on vibration alert will silence the ring volume. However, when the ring

volume is adjusted after the vibration alert is switched on, the phone will ring and

vibrate when a call is received.

From Idle mode:

Press and hold

to switch on or off. When switched

on, the phone will vibrate briefly.

Setting Ring and Key

Volume

Changing either the ring volume and key volume is done in the same manner. If you

increase the ring volume above maximum it will set an escalating ring tone. If you turn

the ring volume off, the silent indicator icon (

[

) will be displayed.

From Idle mode press B 52to enter the Tones menu

Use

to select Ring Volume or Key Volume and press

to set the volume level and press

Phonebook

Phone numbers can be stored in two locations. You can store numbers in the SIM

Phonebook (therefore the number of locations, length of name and number of phone

numbers are SIM dependent). Alternatively you can store phone numbers in the

Mobile Phonebook, this means that if you change the SIM the numbers in the phone

are not lost.

The Mobile Phonebook has the advantage that you can group your phonebook

entries together.

Store a Number

To Store a Number in the SIM Phonebook

From Idle mode enter the phone number and press

Press to select the SIM Phonebook

Enter the name – see “Text Entry” page 48, and press

Confirm phone number and press

Enter location number and press

You can choose not to enter a location number and the entry will be placed in the next

available location. Simply press when Any is displayed in the option area.

To Store a Number in the Mobile Phonebook

From Idle mode enter the phone number and press

Use to select the Mobile Phonebook and press

Enter the name - see “Text Entry” page 48, and press

Confirm phone number and press

If you wish to store an e-mail address with the current number then after confirming

the number press , enter the mail address and press

to select a group - see “Grouping Phonebook Entries” page 12 - into

which to place the entry and press

Enter location number and press

Use

You can choose not to enter a location number and the entry will be placed in the next

available location. Simply press when Any is displayed in the option area.

Phonebook

Overwrite Protection

If a location is occupied you will be prompted to confirm that you wish to overwrite the

current information.

Press

to overwrite the selected location

to choose another location number

Browsing Phonebook

You can search the Phonebook by either Name or Location. The default setting for

browsing is by name. When browsing by name pressing a lettered key will take you to

the first entry starting with that letter.

From Idle mode press B 2to enter the Phonebook menu

Use

to toggle between Names or Loc’ns display mode and press

to select the Phonebook you wish to browse and press

Retrieve a Number

From Idle mode:

Press

Use

to browse through the Phonebook

Once you have selected a phone number or name, there are a number of actions that

you can perform. To dial the selected number press

Note: The Phonebook you last viewed will be the default when you next press

. To

change the default, use the Phonebook menu to select a particular phonebook.

Speed Dial a Number Stored in SIM Phonebook

Enter location number – leading zeros may be left out

Press

Editing Phonebook Entries

You can Detail, View, Recall, Edit, Delete or Create in the Phonebook. To access any

of these functions you follow the same procedure. With a phone number or name

displayed:

Use

to cycle through Detail, View, Recall, Edit, Delete or Create

to select an option

Press

Phonebook

Detail

Displays each element of the selected Phonebook entry. Use

to display the

funtil Edit is

next/previous element of the entry. Each element may be edited - use

displayed in the option area and press

View

Displays an individual name and phone number in the names list.

If an e-mail address is present in the Mobile Phonebook this will be displayed along

with the name and number.

Recall

Displays the phone number, enabling you to either change it or call the number.

Edit

Displays the entry allowing you to make changes as required. Press

changes.

to save any

Delete

Deletes the entry from the Phonebook.

Create

Creates a new entry in the Phonebook

Grouping Phonebook Entries

The ability to group phonebook entries together is an extra function of the Mobile

Phonebook.

Retrieving a Number from a Group

Groups are used to collect together types of Phonebook entries, for example

business and personal. Each group can be suitably titled for quick access to the

entries contained within.

An alert profile can be attributed to groups, or a phone number, thus allowing

incoming calls to be tailored to indicate the type of caller.

From Idle mode press B 24to enter the Group Settings menu

Use

to select the group and press

to select the entry required and press

to recall the number.

Phonebook

Retitling Group Names

From Idle mode press B 24to enter the Group Settings menu

Use

to select the group

until Edit is displayed in the option area and press

Clear the current title and re-enter - see “Text Entry” page 48

Press

Using Alert Profiles

Alert Profile enables you to identify callers with a particular ring tone, display picture

and backlight colour, making it easier to distinguish between callers or groups of

callers.

Creating an Alert Profile

From Idle mode press B 23to enter the Alert Profile menu

Press to insert a new profile

Use to select Personal or Group and press

Recall the phone number / select group from the Phonebook – see “Retrieve a

Number” page 11 and press

Press

Use

to select the ring tone that you wish to use for this profile and press

to select the picture and press

to select the backlight colour and press

Personal Dial

The

key can be defined to recall your favourite phone number in preparation for

initiating a call.

Setting the Personal Dial Number

From Idle mode press B 28to enter the Personal Dial menu

Enter the name - see “Text Entry” page 48, and press

Enter the phone number and press

Using Personal Dial

From Idle mode:

Press

to recall the number, then press

to initiate a call

Phonebook

Hot Key Phone Numbers

It is possible to dial phone numbers from the Phonebook or Service Dial part of

Phonebook very quickly. Some Hot Key Phone numbers may be reserved by the

Service Provider, for example the first three Hot Key Phone numbers may be linked

to Service Dial (network dependent).

Press and hold a Digit key

Press

Setting the Hot Key Dial Source

From Idle mode press B 27to enter the Hot Key Dial menu

Use to select SIM Phonebook or Mobile Phonebook and press

Service Dial Numbers

Your Service Provider may program some special phone numbers into your SIM

(network dependent). It is not possible to modify the Service Dial numbers.

Press and hold

Press to browse through the Service Dial list of phone numbers

The phone number pointed to can only be recalled or dialled.

Review the Phonebook

The Review function in the Phonebook menu shows how many locations are

available in the Phonebook.

From Idle mode press B 25to enter the Review menu

Use to select SIM Phonebook or Mobile Phonebook and press

A summary of the selected Phonebook will be displayed.

Use

to gain a detailed view of the Phonebook locations. Occupied locations

”.

are shown with “

Phonebook

My Numbers

My Numbers is a convenient part of Phonebook where your voice, fax and data

phone number(s) can be stored and viewed. This function is SIM dependent.

Adding Numbers

From Idle mode press B 26to enter the My Numbers menu

Use until Create is displayed in the option area and press

Enter the name - see “Text Entry” page 48, and press

Enter the phone number and press

Enter location number and press

Viewing Stored Numbers

From Idle mode press B 26to enter the My Numbers menu

If more than one number is available then use

numbers

to cycle through the listed

Personalising Your Phone

Add a Start-up Greeting

A personalised greeting can be programmed for when the phone is switched on.

From Idle mode press B 541to enter the Greeting menu

Use the text entry facility to add your greeting and press

page 48

- see “Text Entry”

Displaying Animations

Animations can be displayed when the phone is switched on.

From Idle mode press B 544 to enter the

Animation menu

Use

Press

the animation

to cycle through the animated themes available

to select either the desired theme, or disable

Changing the Ring Tone

The ring tones of the phone can be changed to one of many pre-defined sounds or to

a voice ringer (a voice recording used as a ring tone).

Each of voice, fax, data and message can have a different ring tone.

Alternatively you can use the Melody Composer to generate your own ring tone.

Setting up a Pre-defined Ring Tone

You can choose from a selection of tones and melodies.

From Idle mode press B 523 to enter the

Ring Type menu

Use

and press

Press

to select the appropriate call type to be changed

to select the desired ring tone and press

Recording a Voice Ringer

From Idle mode press B 525to enter the Voice Ringer menu

Press and start speaking into the microphone to record your voice. The

recording will stop automatically after 5 seconds, or before if is pressed.

To playback the recording press

Personalising Your Phone

Composing a Melody

Up to 3 user-defined melodies can be created.

From Idle mode press B 524to enter the Melody Composer menu

Use to cycle through the melodies

Press to edit the chosen melody

Using the following table as reference, enter the notes (from the choice of low, middle

and high), rests, and the durations of each, to generate your composition.

At any time during composing press

to play back the current melody.

Once the composition is complete press

to save it.

1st

2nd

3rd

4th

5th

6th

Key

press

low C

low D

high E

low F

low G

low A

press

low C#

low D#

high C

high D

high C#

high D#

low E

low F#

low G#

low A#

high F

high G

high A

high F#

high G#

high A#

low B

rest

1/8

1/2

1/16

1/1

1/2

1/8

1/4

(duration)

1/16

Editing your Melody

Once the melody has been saved the following operations can be used for re-editing

purposes:

Press

Use

Use the relevant keys to insert new notes/rests

to delete the character to the left of the cursor

to navigate the cursor around the screen

Personalising Your Phone

Disabling all Tones

From Idle mode press B 521to enter the All Tones menu

Press

Bto disable all tones and the silent indicator icon ([) will be displayed.

Repeat the process to enable all tones.

Setting the Backlight Colour

From Idle mode press B 542to enter the Backlight Colour menu

Use

to cycle through the colours available

to select the desired colour

Press

Disabling Key Backlight

The keypad has a green backlight which can be enabled/disabled as follows:

From Idle mode press B 545to enter the Key Backlight menu

Press to disable the backlight

Repeat the process to enable the key backlight.

Disabling Back Case Light

The back case of the phone has an LED which is lit continuously during a call. This

may be enabled/disabled as follows:

From Idle mode press B 546to enter the Back Case Light menu

Press to disable the back case light

Repeat the process to enable the back case light.

Using Voice Commands

Before you can use any of the phone’s voice activated functions you will need to

configure the phone so that it will recognize your own voice and intonation.

Voice Dial Setup

This function allows you to recall numbers from your

Phonebook using voice commands.

From Idle mode press B 531 to enter the

Voice Dial menu

Press

Browse through the Phonebook to select an entry which you wish to attribute a

voice command to, and press

to create a new command

Note: Each recording is short in length, so be prepared to speak once you have

initiated the recording.

Personalising Your Phone

When ready, hold the phone approximately 7” (178mm) from your mouth, press

and speak clearly into the microphone to record the name of the selected

Phonebook entry

When the recording has stopped, you will be prompted to repeat the name

Press and repeat the name

Once recording is complete for a second time, the display will indicate if the

recording was successful or not. If unsuccessful, repeat from step 4.

Dialling Using Voice Command

From Idle mode press and hold the navigation key (

g) in any one of the four

directions

recorded) and wait

The above procedure will recall the phone number and the requested Voice Dial is

repeated; to initiate the call press

d. Speak clearly the name you wish to dial (exactly as

Editing the Voice Commands

You can add, play or delete any of the Voice Dial commands. With a Voice Dial entry

displayed:

Use

fto cycle through Add, Play or Delete and press Bto select an option

Add

To record the voice command again

Play

To listen to your recording

Delete

To delete an entry

Selecting Vibration Alert Type

The vibration alert facility may be set to vibrate continuously or intermittently.

From Idle mode press B 55to enter the Vibration Alert menu

Use to select the type of vibration desired and press

Changing the Language

It is possible to change the language that the phone uses for either the display

messages and/or for text entry.

From Idle mode press B 51to enter the Language menu

Use to select DisplayLanguage or Tegic Language (text entry) that you

wish to change and press

Use to select the desired language and press

Personalising Your Phone

Restoring the Default Phone Settings

Any personal settings can be returned to their factory default, with the exceptions of

the Phone Lock code and the Language.

From Idle mode press B 58to enter the Defaults menu

Press to restore the default settings

Phone Security

The phone features a number of security functions that protect against unauthorized

use, and enable you to restrict access to certain features - see “Using the PIN” page

8. It is recommended that you memorize your security codes. If you need to make a

note of your security codes, never write them in a way that they can be recognized by

another person. If you forget them contact your dealer for the Phone Lock Code or

your Service Provider for PIN and PIN2.

Using Key Guard

The Key Guard function is used to prevent any keys from

being accidentally pressed e.g. when the phone is being

carried.

From Idle mode press

three times to enable Key

Guard

When a call is received Key Guard will be disabled temporarily, allowing you to press

any key to answer the call. Emergency calls can still be made.

Disabling Key Guard

When Free is displayed in the option area press

twice

Changing the Security Codes

From Idle mode press B 8to enter the Security menu

Use

to select Phone Lock, PIN or PIN2

until Change is displayed in the option area and press

Enter the current code and press

Enter the new code and press

Verify the new code and press

Phone Security

Restricting Calls

Call Barring

The Call Bar function is used to restrict certain outgoing and/or incoming calls. Call

Bar is controlled by a security password that is supplied by your Service Provider.

When updating or checking the status of Call Bar the phone must be registered with a

network. Different Call Bar restrictions can be used for voice, fax and data calls. Any

combination of call restrictions can be set.

From Idle mode press B 82to enter the Call Bar menu

Use

to select Bar Voice, Bar Fax or Bar Data and press

to the select level of call barring that you wish to apply and press

Enter Call Bar password and press

Barred Dialling

The Barred Dial function enables you to bar all phone numbers pre-programmed in

the SIM from being dialled on the phone. To use this function PIN2 is required.

From Idle mode press B 86and press

PIN2 and press

Bto enable Barred Dial , enter

Fixed Dial

The Fixed Dial Store is part of Phonebook, but with additional security. When the

security feature Fixed Dial is enabled it is only possible to make calls with phone

numbers that are in the Fixed Dial Store.

When Fixed Dial is enabled any manually dialled phone numbers must match a

phone number in the Fixed Dial Store.

To store, edit or delete a phone number in the Fixed Dial Store the Fixed Dial

function must be enabled. With Fixed Dial enabled, all phone numbers can be

added, edited or deleted as normal, but you will be prompted for PIN2.

“Wild” Numbers

Wild numbers are spaces that can be stored in a phone number. The “wild” numbers

must be filled before the phone number is dialled. Used in conjunction with Fixed Dial

calls can be restricted, for example, to a specific area by storing the area code of a

phone and when recalled the remainder can be added. The “wild” numbers can be

anywhere within a stored phone number.

Press and hold

number

until _ is displayed to enter a wild

When the phone number is recalled pressing a numeric

key will fill in a “wild” number.

Applications

Clock

This phone incorporates a clock with date/time, an alarm and a power on/off feature.

A second clock for dual time is also included - see “Second Clock” page 47.

Initially Setting the Home Time

From Idle mode press B 43111 to

enter the Time Set menu and press

Use to select whether you require Summer Time

setting on or off and press

Enter the digits for the date in the format day/month/year

and press

Enter the digits for the time using 24 hour clock and press

Setting the Clock Format

From Idle mode press B 4322 to enter the Display Format

Press

to cycle through the different clock and/or date formats

to select the desired clock display type

Altering the Time/Date

From Idle mode press B 43111to enter the Time Set menu

and press

Press and hold

Enter the digits in the format day/month/year

Press to accept the date

Press and hold to remove the current time

Enter the digits using 24 hour clock and press

to remove the current date

Setting the Clock for Summer Time

From Idle mode press B 43112to enter the Summer Time

Press

to set Summer Time on.

If Summer Time setting is on then press

to turn it off

Applications

Setting the Alarm

If you have not already set the clock, you will be prompted to do so prior to setting the

alarm.

There are four separate alarms, each of which may be set independently.

From Idle mode press B 433 to enter the

Alarm Set menu and press

Use to select the alarm to be set and press

Enter the digits for the time and press

Use

to select the frequency of the alarm and press

Use

to select the ring type and press

Once the alarm has been set,

will be displayed in the information area when the

phone is in Idle mode.

The alarm is activated in accordance with the current clock (Home or Visitor)

Muting the Alarm

When the set time is reached the alarm will sound and the display will flash with an

alarm message. The alarm will sound for 30 seconds. If the alarm is due during a call,

it will activate vibration alert.

To end the alarm:

Press any key

Disabling the Alarm

From Idle mode press B 433 to enter the Alarm Set menu and

press

Use

to select the alarm to be disabled and press

twice

until Disabled is displayed and press

Once disabled, following the same procedure will re-enable the alarm.

Adjusting the Alarm Time

From Idle mode press B 433 to enter the Alarm Set menu and

press

Use

Press and hold

Enter the digits for the time and press

Press to select the frequency of the alarm and press

Use to select the ring type and press

to select the alarm to be adjusted and press

to remove the current alarm time

Applications

Setting a Power On/Off Time

You can set your phone to turn itself on or off automatically at a specified time using

the Power On/Off feature. The procedure for setting/adjusting the Power On/Off

automatically is similar to that for setting the time on the clock. For either setting or

adjusting the time you need to select Power On Time or Power Off Time in the

Clock Function menu.

Caution: Ensure that the setting of the Power On function will not contravene any

regulations whereby it may automatically power on when in an aircraft or medical

facility etc. - see “Important Information” page 54.

Calculator

The four function calculator will enable you to perform simple

arithmetic calculations (addition/subtraction/multiplication

and division).

From Idle mode press B 44 to enter the

Calculator menu

Enter a number (maximum 10 digits) and it will be displayed on the lower line

Use

to select the arithmetic operation you wish to perform (

to divide, to subtract)

bto multiply, c

to add,

Enter a number (maximum 10 digits) and it will be displayed next to the

operation symbol

If you use

calculation will be performed and the result displayed on the upper line

Press to complete the calculation when = is displayed in the option area

to add a decimal point.

to select another arithmetic operation to perform, an intermediate

Note: Press and hold

Currency Convertor

The currency convertor enables you to convert from/to a home currency using a

conversion rate that you enter.

From Idle mode press B 45to enter the Currency menu

Entering an Initial Conversion Rate

Press

Enter a country code for the home currency (up to 3

characters) and press

Enter a country code for the foreign currency (up to 3

characters) and press

Enter the currency conversion rate and press

Applications

Note: Press and hold

to add a decimal point.

Converting a Value

Check the conversion rate is the one you require and press

Enter the value to be converted and press

The country code and currency rate will be retained in the phone once entered. The

next time you use the convertor you can edit the conversion rate/country codes while

in the Currency/Rate display. Use

press

until Edit is displayed in the option area and

Swapping the Currency Conversion

When you have accepted the conversion rate and are ready to enter the value to be

converted, you can swap the currencies to convert from the foreign currency into the

home currency.

Use

until Swap is displayed in the option area and press

Enter the value for conversion and press

Short Text Messages

You can receive, display, edit and/or send short text messages, of up to 160

characters to mobile phones on the same network or any network that has a roaming

agreement.

Setting the Phone for Text Messages

Before you can send a message you must enter the Message Centre number into

Parameters (your Service Provider will supply the Message Centre number).

The Message Centre number may have been preprogrammed, on your SIM card.

Setting the Message Centre Number

From Idle mode press B 3163 to enter the Message Centre

menu.

Enter message centre number in international dial format – see “International

Dialling” page 6

Sending a Text Message

From Idle mode press B 313 to enter the

Create menu and press

Enter the message (up to 160 characters) – see “Text

Entry” page 48 and press

You will be prompted if you wish to send the message, if you

do not wish to send the message press , the message will be stored.

and enter the destination phone number (or recall a number from the

Phonebook) - see “Retrieve a Number” page 11 and press

Press

You may be asked if you wish to have delivery confirmation, if you do not want

confirmation press . If you do, use until Yes is displayed in the option

area, then press

Press

The default setting for delivery confirmation can be enabled/disabled using the

Report parameter in the Short Message menu.

Use

to select a melody type, if required, and press

Short Text Messages

Receiving Text Messages

When a Short Text Message is sent to your phone the message indicator (

N) will

blink in the display, with an audible tone or vibration. This indicates that a new

message has been received.

When Read is displayed in the option area press

to read

the message. Use to navigate through the message and to

identify the sender of the message.

Note: If the message indicator is displayed constantly (does

not blink) this indicates that the message area is full and you

will need to delete old messages in order to be able to receive new messages in the

future.

Message Options

Reply to a Message

When you have received and read a message you may wish to reply to the sender.

This is the default setting in the option area and pressing

reply message.

Bwill allow you to create a

Delete a Message

While reading a message use

until Delete is displayed in the option area. Press

twice to delete the message. To enable the auto-deletion of messages - see

“Message Parameters” page 30.

Edit a message

While reading a message use

until Edit is displayed in the option area. Press

and make any amendments. Pressing

will give you the option to send the edited

message - see “Sending a Short Text Message” page 27. Press

Cif you do not wish

to send the message and it will be stored in the Send List.

Using Pre-defined Messages

Pre-defined messages can be sent immediately or they can be used as a basis for a

longer message and edited accordingly.

From Idle mode press B 313to enter the Create menu

Use

to point to the pre-defined message you wish to use and press

Use

to navigate through the message and add any extra text – see “Text

Entry” page 48

When complete the message can be sent - see “Sending a Text Message” page 27

Short Text Messages

User Defined Message

Creating a User Defined Message

It is possible to create a user defined message which, once generated, can be used

as any other pre-defined message.

From Idle mode press B 314. Edit the message as required and

press

Selecting the User Defined Message

From Idle mode press B 313

The user defined message will be displayed at the top of the list of pre-defined

messages.

Use

until the

prompt is adjacent to the message and press

Changing the Pre-defined Message Language

With the pre-defined message highlighted:

Use

to select Lang in the option area and press

to select a language and press

until Select is displayed in the option area and press

twice to send

the message

Manage Messages Lists

All messages, whether sent or received, will be stored on the SIM until they are

deleted. Selecting a stored message allows it to be replied to, edited or deleted.

Receive List

Messages received will be stored in the Receive List. A blinking “•” indicates an

unread message.

When reading a message the sender’s information is displayed below the text

indicating the time the message was sent and the message centre number. Pressing

allows you to reply to the message.

Send List

When a message has been sent or edited it will be stored in the Send List.

Review

Review allows you to check usage of the message area.

Short Text Messages

Message Parameters

From Idle mode press B 316to enter the Parameters menu. The

following parameters can be set:

Auto Delete

When set will erase messages automatically:

Received Read - will overwrite the oldest read message

Received Any - will overwrite the oldest message even though it may not have been

read.

Lifetime

This is the duration that your message is stored at the Message Centre. Delivery

attempts will be repeated until the message has been delivered or the Lifetime

expires.

Message Centre

Allows the Message Centre phone number to be edited - see “Setting the Phone for

Short Text Messages” page 27.

Report

When your message has been delivered a confirmation will be received if Report is

set to Yes.

Protocol

The Message Centre may be able to convert the message to the format specified by

the selected protocol.

Cell Broadcasts

Cell broadcasts are general information that is sent to your phone by a network

operator. The information can include topics like local traffic reports, weather etc.

Setting Broadcast Topics

You need to specify the topic(s) of information that you wish to receive as broadcasts

before you can receive them.

From Idle mode press B 3173to enter the Topics menu

When Insert is displayed in the option area press

Use to cycle through the available topics and press

displayed topic into your broadcast list

Bto insert the currently

Short Text Messages

Enabling/Disabling Broadcasts

From Idle mode press B 3171to enter the Receive menu

Press

Once enabled, following the same procedure will disable broadcasts.

Message List

This is a store for the last received broadcast messages. Messages can be deleted

from here.

Language

The Language in which broadcast messages are displayed can be changed

(network dependent).

Call Information

Recent Numbers

Recently dialled phone numbers will be stored in Last Dialled.

If Caller Identification is available the caller’s phone number for an answered call will

be stored in Answered and an unanswered call will be stored in Unanswered.

If Caller Identification is not available then calls will still be stored but will have the

date and time attributed to them.

When the store is full the next phone number will overwrite the oldest.

Press

Use

to select Last Dialled, Answered or Unanswered and press

to select the phone number (or name) you wish

to redial and press

You can edit or delete the phone number before dialling – see

“Editing Phonebook Entries” page 11.

If you wish to store the selected number in Phonebook, press

while the number is displayed – see “Store a Number”

page 10.

Calling the Last Dialled Number

To redial your last called phone number press D D

Returning an Unanswered Call

When the display shows that you have received calls but not answered them.

Press

The last caller’s phone number will be displayed if it is available

Press

to select the phone number you wish to dial

Call Duration

From Idle mode press B 6to enter the Call Service menu

Use to select one of the functions described below, and press

The Last Call function will display the duration and call charge, if available, of the last

call during Idle mode or the current call during a call. Times are indicated as: hours

(0-99), minutes (0-59), seconds (0-59) - HH:MM:SS.

The All Calls function displays the accumulated duration and call charge, if available,

of incoming and outgoing calls. The lock code or PIN2 is required to reset the timer

and call charge.

Call Information

Call Charges

To maintain control over the cost of calls that are made, the phone can be set to

restrict use to a finite number of units overall.

Setting the Unit Price

Firstly, a price per unit must be entered. This is the cost that the Service Provider

charges for one unit of call time.

From Idle mode press B 662to enter the Price/Unit menu

Press to edit the values

At this point you will be asked to enter your PIN2.

Enter a currency unit (up to three characters) and press

Enter a price and press

Setting the Maximum Unit Level

From Idle mode press B 663to enter the Max Cost menu

Press to edit the values

At this point you will be asked to enter your PIN2.

Enter a value (number of units) which is to be the maximum permitted, and the

corresponding cost will be displayed

Press

to accept

Note: The duration of one unit may vary during the day, peak and off-peak times.

Therefore, the call charge can be calculated accordingly. However, call charge

information may not give an accurate reflection of the tariffs charged by your Service

Provider.

Setting a Warning Level

A warning can be set as an indication that the maximum cost is about to be reached.

From Idle mode press B 664to enter the Warning at menu

Press to edit the value

Enter a value (in units) at which time you would like the warning to sound and

press

Call Identification

In the Call Service menu, the Caller’s ID and Withhold ID functions allow you to

check the status of whether a Caller’s Identification is sent or can be received.

Note: When checking the status the phone must be registered with a network.

Advanced Operation

Diverting Calls

Voice, fax and data calls can be diverted using different circumstances and to

different numbers. For example you may wish voice calls to be diverted to Voicemail

in the event that the phone is switched off.

From Idle mode press B 7to enter the Call Divert menu

Use

to select the type of calls to divert and press

to select the circumstances to initiate the divert and press

Enter phone number to divert to and press

When a divert situation is enabled the divert icon (t) is displayed.

When updating or checking the status of Call Divert the phone must be registered

with a network.

Holding Calls and Call Waiting

Holding/Resuming a Call

Press

when Hold is displayed in the option area

Press

when Resume is displayed in the option area

Making a Second Call

Enter phone number (or recall from Phonebook – see “Retrieve a Number” page

11)

Press

The first call will be placed on hold.

Receiving a Second Call

A second call can be received, if Call waiting is switched on. This is enabled from the

Call Service menu. It is not possible to have more than one fax or data call. All voice

calls must be ended before you can make or receive a fax or data call.

Accept a Second Call

Press

when Accept is displayed in the option area

The current call will be placed on hold.

Reject a Second Call

Press

to display Reject in the option area

Press

Advanced Operation

End Current Call and Receive Second Call

Press

with a waiting call

Press any key except

Operation During Two Calls

Swapping Between Calls

The

prompt indicates the current call

Press

when Swap is displayed in the option area

End Current Call

Press

to display End in the option area

Press

The held call will remain held.

End Both Calls

Press

Call Transfer

With two calls connected, Call Transfer enables you to connect them together ending

your connection, leaving the other parties to talk together without you.

When you have two calls:

Press

to display Trans. in the option area

The two calls will be connected to each other and your call will be ended.

Note: Two call transfer cannot be utilized while in Multi-party mode.

Multi-party Calls

A Multi-party call enables three to five people to be in conversation at the same time.

It is possible to swap between a Multi-party call and another call in the same way as

with two separate calls.

Enabling Multi-party

With two calls connected (one active, one on hold):

Press

to display Merge in the option area

A Multi-party call has been enabled, all three people will be able to talk to each other.

Advanced Operation

Adding to Multi-party

You can add to the Multi-party call (up to a maximum of five). Either by making a call

or accepting an incoming call. The call can then be merged into the Multi-party.

Note: When making a call or accepting an incoming call the Multi-party call will be

placed on hold. The callers in the Multi-party call can continue to communicate with

each other while on hold.

Splitting a Multi-party

You can select an individual from the Multi-party and remove their connection. This

enables you to talk privately without the participation of the rest of the Multi-party.

During a Multi-party call:

Use

until Option is displayed in the option area and press

Press

to select a caller in the Multi-party

to display Split in the option area

The selected caller will be split from the Multi-party call and the Multi-party call will be

placed on hold (the remaining Multi-party call callers can still communicate).

Ending Multi-party Calls

You can either select an individual in the Multi-party and end the call or end the entire

Multi-party call. If a call is held, or an other call is incoming then an individual call

cannot be ended.

Ending a Single Connection

During a Multi-party call

Press

to display Option in the option area and press

to select a caller in the Multi-party

to display End in the option area

Ending a Multi-party Call

During a Multi-party call:

Press

to end all the calls at once

Advanced Operation

Changing to a New Network

When not in your home country you may use a network that you do not directly

subscribe to, this is called ROAMING. National Law may not permit roaming in your

home country.

The New Network function is used to manually select a network that is available in

your current location.

From Idle mode press B 91to enter the New Network menu

Use to select one from the list of available networks and press

An X will be displayed in the information area if you cannot register with the selected

network.

When the Search Mode is set to Automatic the phone will automatically reselect a

new network in order to maintain optimum network availability. With the Search

Mode set to Manual the phone will only use a selected network. If coverage is lost

another network should be selected.

The Network List is used when the Search Mode has been set to Automatic. The

location numbers in the Preferred Network List show the search priority.

Selecting Insert stores a new network in the currently displayed location and then

moves other networks down, Edit overwrites the old network with a new one, and

Add stores a new network at the end of the list.

WAP Browser

The phone’s WAP (Wireless Application Protocol) Browser enables you to access

internet services supported by the network, such as news, weather reports, sport etc.

Server Settings

Before you can access internet services, your SIM must be data enabled and the

relevant configuration information, entered into the phone.

These settings may have been pre-programmed for you by the network operator.

Note: Modifying previously entered settings can cause failure of the Browser.

From Idle mode press B 423to enter the Server Setting menu

Two servers may be setup on the phone. Use

server settings

to select one or other of the

Use

until Edit is displayed in the option area and press

A list of configuration parameters will be displayed. The parameter Name will be

highlighted and Edit will be displayed in the option area

Press

Enter the name of the WAP server and press

Use to select each of the other parameters in turn and press

enter the information

Press and select the next parameter in the list

in order to

After all parameters have been entered, press

level

to return to the previous menu

Use

until Set is displayed in the option area and press

to store the

settings

Record your WAP settings in the table at the rear of this booklet for easy

reference.

Activating the Browser

The Browser can be activated either by:

From Idle mode pressing and holding the

key

From Idle mode press B 41

WAP Browser

The first time that the browser is activated there will be no content stored so the Home

URL content will be displayed (as defined by the network operator). From the second

time onwards, the last displayed page will be recalled from cache (Cache is the

phone’s memory that stores content downloaded in the past). When recalling content

from cache the phone remains off-line (not connected to a WAP server).

Navigating Content

Use the Navigation key (g) to scroll through the content on the screen as follows:

Press

to scroll up/down on the current page

to return to the previous page

to return to the next page (only applicable if returned to previous page)

When linked text (underlined text) is highlighted press

represented by the link.

to load the page

(

)

indicates a table - when highlighted press

Bto view contents of table

Indicates an image which cannot be displayed

Indicates on-line browsing

Indicates off-line browsing

The Browser Menu

The Browser also contains its own menu which is applicable

when content is currently being displayed (either on-line or

off-line).

The Browser menu is accessed by pressing the Phonebook

key (

display.

This menu is used as follows:

A) when Menu is displayed at the bottom left of the

Home Deck

Displays the Home URL content as defined by the network

operator

Bookmark

Enter URL

Reload

Use, add, delete and rename bookmarks

Type in a URL directly to go to a known site

Will reload and update the current page

Deletes the content in cache and displays the Home URL content

Reset

WAP Browser

Using Bookmarks

Frequently accessed pages may be bookmarked to save time. This prevents the

need to re-enter the URL each time.

Adding a Bookmark

While viewing content press A a BBto register a bookmark

Recalling Pages Using Bookmarks

With content displayed press A a B

Use to select the relevant bookmark from the list, and press

Renaming a Bookmark

With content displayed press A a B

Use to select the relevant bookmark from the list, and press A B

Press and hold to remove the bookmark name, then re-type the name

required and press

Deleting Bookmarks

With content displayed press A a B

Use to select the relevant bookmark from the list, and press A a BB

Deactivating the Browser

The Browser can be deactivated as follows:

When browsing on-line press

When browsing off-line press

once to resume browsing off-line

once to exit Browser

When browsing on-line or off-line press and hold

to exit Browser

Setting the Linger Time

The phone will be automatically disconnected from the WAP server after a set period

of non-interaction. This period is defined in seconds by the Linger Time setting.

From Idle mode press B 421to enter the Linger Time menu

Press and hold

to remove the current linger time, then re-enter the value

required and press

Last Error

If an error should occur when using the Browser, use this function to inform the

network operator of the last error which occurred with the phone to assist with a

diagnosis of the problem.

From Idle mode press B 422to display the error

Internet E-mail

The E-mail function will send and receive internet e-mail messages to the mail server

of an Internet Service Provider that supports POP3/SMTP protocols.

E-mail Setup

Before you can send and receive e-mail messages, your SIM must be data enabled

and a contract must be set up with an Internet Service Provider and the relevant

configuration information, supplied by the provider, entered into the phone.

From Idle mode press B 32to enter the E-mail menu

Use

to select Parameters and press

to select Server Settings and press

Up to three Internet Service Providers may be setup

Use until Create is displayed in the option area and press

A list of configuration parameters will be displayed. The parameter Profile Name will

be highlighted and Edit will be displayed in the option area

Press

Enter the name of the Internet Service Provider and press

Use to select each of the other parameters in turn and press

enter the information

Press and select the next parameter in the list

After all parameters which have been supplied by the Internet Service Provider

have been entered, use until Save is displayed in the option area and press

to store the settings

in order to

Record your e-mail settings in the table at the rear of this booklet for easy

reference. For additional information about setting up the Internet E-mail see

http://www.user.mci.co.uk

Create a New Message

From Idle mode press B 32to enter the E-mail menu

Use

to select Create and press

Enter the relevant details in the To, CC, Subject and Message fields, using

navigate between them.

gto

Note: The To and CC fields must be entered using previously saved mail addresses

in the Phonebook, retrieved in the normal fashion.

After entering the necessary information press

Use until Save is displayed in the option area and press

Internet E-mail

Send/Receive Messages

The Send/Receive function is used to both send messages created on the phone to

the server of the Internet Service Provider, and to check your mailbox on the server

for incoming messages and download them to the phone at the same time.

From Idle mode press B 32to enter the E-mail menu

Use until the Send/Receive function is highlighted and press

If there are unsent messages in the Outbox you will be prompted to send them.

Press to send any unsent messages.

If there are new messages to download to the phone then you will be prompted to

receive them.

Press

to receive new messages.

If no action is taken the connection will time out after one minute and return to the

E-mail menu.

If any messages are downloaded then, when finished, the phone will display the new

messages allowing them to be viewed, replied to etc.

If no messages are downloaded the phone will display the Inbox menu, unless there

are no messages in this list, then it will return to the E-mail menu.

Read Messages

From Idle mode press B 32and press

to enter the Inbox menu

to scroll

to read the current message.

The header fields of the most recent messages will be displayed. Use

through previous message headers and press

Message Status

A message can be in one of four states. The current state of each message is

indicated by an appropriate icon:

Indicates a message which has been read or sent.

Indicates an unread or unsent message

Indicates that the message has been locked

Indicates a broken message (either a message too long for the phone or a

message which contains an attachment)

While reading a message any of the following operations may be performed by using

the

key until the relevant operation is displayed in the option area and pressing

Compose a reply to the sender of the current message

Internet E-mail

Forward

Send the current message to a different person other than the sender

Delete

Remove the current message from the list

Lock

Apply a lock to the message so that it cannot be overwritten when receiving further

messages. A locked message can still be deleted manually.

Store an Address

An e-mail address can be stored in the Mobile Phonebook - see “Store a Number”

page 10

Add a Signature

This Signature function enables a pre-defined signature to be added to your

outgoing e-mails. Once the signature has been setup, each time a new e-mail is

created it will have the signature automatically inserted.

Setup Signature

From Idle mode press B 32to enter the E-mail menu

Use

until the Parameters function is highlighted and press

until the Signature function is highlighted and press

Enter the text for your required signature – see “Text Entry” page 48 and press

Manage Message Stores

Once the Inbox and/or Outbox store are full any new messages received or created

will overwrite existing messages from the oldest first. To prevent messages being

overwritten each list should be maintained deleting any messages which are no

longer required. Important messages can have a lock applied to them so that they

cannot be overwritten when the Send/Receive process is activated.

Additional Features

Desktop Handsfree

Desktop Handsfree enables you to hold a conversation without having to hold the

phone to your ear.

Note: Do NOT hold the phone to your ear in Handsfree mode.

Swapping Between Handsfree and Handheld Calls

During a Handheld call:

Use

to until H’free is displayed in the option area

Press

During a Handsfree call:

Press to revert to Handheld operation

Answering a Call Handsfree

Pressing and holding

will allow the call to be answered Handsfree.

Voice Memo

You can record a two-way conversation for up to 18 seconds during a call. There are

two separate areas for voice memo messages (Voice Memo 1, Voice Memo 2)

allowing you to record two separate voice calls. If a different SIM is installed any voice

memos will be lost.

Caution: Security of a recorded message is your responsibility. You MUST ask for

the other party’s consent before recording.

Record a Voice Memo

Press

during a call

A tone will sound when recording starts. When the recording stops

a tone will sound to you.

If you press

while recording a voice memo, recording to the

current voice memo area will stop. Pressing

recording in the other voice memo area.

again will start

MEMO

is pressed when the two voice memo areas are occupied,

the older recording will be overwritten by the new memo.

Additional Features

Play Back a Voice Memo

Press

from Idle mode:

If there are two voice memos recorded they will both be played back continuously. To

swap playback between the two voice memos areas press

If there is no recording two tones will sound.

during playback.

To stop playing, press

The Note Pad function is available during playback - see “Note Pad” page 46.

Volume Control During Playback

While playing back:

Press

to adjust the volume of the voice memo

Delete Memo

Press

twice during playback

Dicta Phone

The dicta phone facility allows two voice messages (of up to 10 seconds each) to be

recorded, for later playback. If a different SIM is installed any voice messages will be

lost.

Recording a Message

Press and hold

key when in Idle mode

When ready, press

message.

and speak clearly into the microphone to record your

Play Back a Message

Press and hold

Use to select Playback and press

To play the most recent message press

To play the other message use to select the second message in the list and

press

key when in Idle mode

Delete a Message

While the message is playing or message list is displayed press

twice

Additional Features

DTMF Tones

DTMF tones can be sent during conversation. These are often used to access voice

mail, paging and computerized home banking. For example, you may need to input a

number to remotely access voice mail messages. A phone number may be stored in

the Phonebook with DTMF tones, allowing the number to be dialled upon recall and

the DTMF number to be sent automatically.

Send DTMF Tones During a Call

Enter digits (0 to 9, # and *)

Pause Dial

Using pauses allows you to send DTMF tones automatically.

Enter phone number

Press and hold

until a P is displayed

Enter DTMF digits after the pause, e.g. enter the number

to access voice mail messages.

Press

When the call is successful DTMF tones will be sent after 3

seconds or when is pressed.

If the DTMF tones are unsuccessful then the destination of your call may require that

the length of the tones be increased.

From Idle mode press B 57to enter the DTMF Length menu

Use to set to Long and press

Note Pad

During a call you can enter numbers which you may wish to dial when the call has

ended.

During a call:

Enter phone number

When the call has ended press

to call that number

To store in Phonebook, press

Number” page 10.

while the number is displayed – see “Store a

Additional Features

Second Clock

The Second Clock can either be set to auto-adjusting, whereby the second time will

be automatically set from the country code of the current network, or a specified time

difference can be set manually.

Setting Clock Display

From Idle mode press B 4321to enter the Display Pattern menu.

Use

to select either Second Time or Home Time and press

Setting Auto Adjustment

If you travel to a country which has a roaming agreement with your home network,

your Second Clock will be automatically adjusted. However, for countries which have

several time zones in the same country manual adjustment is required.

From Idle mode press B 431232 to enter the Auto

Adjustment menu.

Use

to select home country and press

Enabling Auto Adjustment

From Idle mode press B 431231 to enter the Auto

Adjustment menu and press

Repeat to disable Auto Adjustment.

Setting Manual Adjustment

From Idle mode press B 43121 to

enter the Time Difference menu.

Use

to select the time difference required and press

to set the value

Setting Summer Time

From Idle mode press B 43122to enter the Summer Time

menu.

Press

to set Summer Time on

Once enabled, following the same procedure will disable Summer Time.

Accessory Related Features

When Auto Answer is switched on, and Personal Handsfree is connected, a call will

be answered without pressing any keys.

This is also applicable to the Handsfree Car Kit accessory.

See the documentation provided with the relevant Accessory for operational

details.

Text Entry

The phone provides a means for entering alphanumeric characters to enter details

into the Phonebook, to create text and e-mail messages etc. This section details the

characters that can be entered and the relevant keys to press.

Text Mode

Normal

Greek

Extended

(W)

Numeric

(0-9)

T9^®

Key

)

(

)

Alternatives

0+P_

Punctuation space.@/:;+-”,!¡?¿()[]{}’&%\^~|<>=€£$¥¤§

ABG

abc

def

ABCabc

DEFdef

AÄÅÆBCÇaäåæàbc

DEÉFdeéèf

GHIghiì

DEZ

HQI

ghi

GHIghi

KLM

NXO

PRS

TUF

CYW

jkl

JKLjkl

mno

pqrs

tuv

MNOmno

PQRSpqrs

TUVtuv

MNÑOÖØmnñoöøò

PQRSpqrsß

TUÜVtuüùv

WXYZwxyz

wxyz

WXYZwxyz

Shift/Lock*

Space

* Press

case). Pressing

once to enter a single capital letter (subsequent characters will be lower

twice acts as a keyboard CAPS LOCK function and subsequent

characters will be uppercase, until

is pressed for a third time returning to

lowercase character entry.

T9^®Text Input

Using this mode of text entry dramatically reduces the number of key presses

required:

Press a key once for any letter you require on that key. The desired letter may not

be displayed. Continue pressing other keys until the end of a word is reached; then

check that the word has been typed correctly before continuing on to the next word.

Text Entry

If the combination of letters typed has produced a word which is not the one you

require, press

next word.

repeatedly until the correct word is displayed. Continue to the

If the word you require is not in the internal dictionary (i.e. It is a proper noun or a

rarely used word) then it should be entered using the Normal (

U) mode.

Other Text Modes

To access any of the other text entry modes use

to cycle through until the desired

mode is displayed in the Information Area.

When using Normal (

U), Greek (V) or Extended (W) text entry modes, each

time a key is pressed in quick succession it will display the next character available on

that key (or if the key is pressed and held down it will cycle through the available

characters). Releasing the key, or pressing another key will enter the currently

displayed character and the cursor will move to the next position.

Editing Text

Pressing

will move you up or down one text line (or field in Phonebook). Pressing

will move you left or right one character (or to the first character of the previous or

next word when using T9^®text entry mode). When the cursor is moved over a

character and another key pressed this will insert the new character immediately

before the selected character. Pressing

will delete the character to the left of the

cursor or delete the current line when pressed and held.

T9^®is a trademark of Tegic Communications Inc.

Menu Structure

From Idle mode pressing

will display a menu of phone features. To select a

feature press

then press

so that the pointer is showing next to the feature that you require

To exit the current menu and return to the previous level press

C. To exit completely

out of the menu structure, press and hold

, or

(except during a call).

1 Key Guard

2 Phonebook

Browse

Create

Alert Profile

Group Setting

Receive List

Send List

Create

User Defined Msg

Review

My Numbers

Service Dial *

Hot Key Dial

Personal Dial

Parameters

Broadcasts

3 Messages

Short Message

E-mail

Inbox

Outbox

Create

Send/Receive

Review

Parameters

Start Browser

4 Applications

Browser Setting

Clock Function

Calculator

Clock Set

Clock Format

Alarm Set

Currency

Power On Time

Power Off Time

Home

Second

Display Pattern

Display Format

Display Language

Tegic language

Language

Tones

5 Personalise

All Tones

Ring Volume

Ring Type

Melody Composer

Voice Ringer

Key Volume

Warning Tone

Voice Command

Display Setting

Vibration Alert

Auto Answer

DTMF Length

Defaults

Voice Dial

Greeting

Backlight Colour

Contrast

Animation

Key Backlight

Back Case Light

Last Call

All Calls

Call Waiting

Caller’s ID

Withhold ID

Call Charge

6 Call Service

7 Call Divert

8 Security

Voice Calls

Fax Calls

Data Calls

Cancel All

Status

Phone Lock

Call Bar

PIN2

Fixed Dial

Barred Dial

Bar Voice

Bar Fax

Bar Data

Cancel All

Status

Cost Left *

Price/Unit *

Max Cost *

Warning at *

Password

New Network

Search Mode

Network List

9 Network

* Function is SIM/network dependent

Trouble Shooting

Should any problem persist contact your dealer.

Problem

Cause

Remedy

Check that the Battery Pack is fully

charged and correctly connected to

the phone

Telephone will not

switch on

The network you are

using and the

condition of the

battery pack can

affect battery life

Extremely short

battery life for a

new battery pack

Short battery life

for an old battery

pack

The battery pack has

worn out

Replace with a new one

When the Battery

Pack has been

The charging

Leave the phone charging the

Battery Pack for a few minutes

indicator does not

light and the phone

cannot be switched

on when charging

deeply discharged

the phone will take a before the indicator is lit and

short time until the

indicator lights

attempting to switch it on

The phone is locked

Unlock the phone

Outgoing calls are

barred

Disable the outgoing call barring, or

barred dial

Calls cannot be

made

The phone is not

registered to a

network

Move to a coverage area and

operate your phone after it has

registered with a network.

Check your SIM supports Fixed

Dial

Check if the Fixed Dial is switched

Check the phone number is stored

in the Fixed Dial

Calls cannot be

made from Fixed

Dial Store

Trouble Shooting

The phone is not

switched on

Switch the phone on

Incoming calls are

barred

Calls cannot be

received

Disable the incoming call barring

The phone is not

registered to a

network

Move to a coverage area and

operate your phone after it has

registered with a network.

Check that the antenna symbol

is displayed - move to a coverage

area and operate your phone when

the antenna symbol is displayed

Emergency calls

cannot be made

You are not in a

GSM coverage area

Telephone

The phone is locked

Unlock the phone

numbers cannot be

recalled from

Phonebook

Phone number has

been restricted

Switch off restriction

Important Error Messages

These are some of the most important error messages which may be displayed:

Area Not Allowed

Roaming in the selected area is not allowed

Network Not

Allowed

Roaming with the selected network is not allowed

The network has detected an authentication failure

because your SIM is not registered with that network -

contact your Service Provider

Security Failure

SIM Blocked /

Contact Service

provider

The SIM is blocked because one of the PIN/PIN2

unblocking keys (PUK/PUK2) has been entered incorrectly

ten times - contact your Service Provider

The phone has detected a problem with the SIM - switch

the phone off and then back on; if the message is still

displayed contact your Service Provider

SIM Error

The SIM has failed one or more of the SIM personalisation

checks - contact your Service Provider

SIM Invalid

The selected feature is either not supported by the SIM or

is not available with the current subscription - contact your

Service Provider

Function

Unavailable

The PIN2 is blocked permanently because the wrong

PUK2 has been entered ten times, services controlled by

PIN2 cannot be used - contact your Service Provider

PIN2 Invalidated

Trouble Shooting

A message has been received but the message store is

full - to receive messages, delete some of the currently

stored messages or set messages to Auto Delete

Message Rejected

Store Full

Number Too Long

(Max:20)

The edited or newly created Phonebook number is too

long for the SIM

Warning Store Full The message area is full. Your messages cannot be stored

Continue?

until some of the currently stored messages are deleted

On changing the phone lock code, verification of the new

Verification Failure code is incorrect - retry changing the lock code with correct

verification

Incorrect Lock

Code

Disabling or enabling the lock code has failed due to

incorrect entry of the lock code - re-enter lock code

Incorrect PIN /

PIN2 / PUK / PUK2

The entered code is incorrect - re-enter code correctly

Auto Redial List

Full

Redial list of unsuccessfully dialled numbers is full - switch

the phone off and then on again

Important Information

Safety Considerations

The following information should be read and understood as it provides details which

will enable you to operate your phone in a manner which is both safe to you and your

environment, and conforms to any legal requirements regarding the use of cellular

phones.

This equipment should only be charged with approved charging

equipment. Other usage will invalidate any approval given to this

apparatus and may be dangerous. The use of approved charging

equipment is recommended to ensure optimum performance and avoid

damage to your phone. Ensure the voltage rating of the AC Adaptor is

compatible with the country of use when travelling abroad.

An AC Adaptor (EB-CAD92xx*) is supplied with the Main Kit. Other

recommended equipment for charging - DC Adaptor (EB-CDD92),

Handsfree Car Kit (EB-HFD93Z).

* Where xx identifies the specific AC Adaptor region, e.g. CN, EU, HK, TW, UK.

Switch off your cellular phone when in an aircraft. The use of cellular

phones in an aircraft may be dangerous to the operation of the aircraft,

disrupt the cellular network and may be illegal. Failure to observe this

instruction may lead to the suspension or denial of cellular phone

services to the offender, or legal action or both.

You are advised not to use the equipment at a refuelling point. You are

reminded to observe restrictions on the use of radio equipment in fuel

depots, chemical plants or where blasting operations are in progress.

Never expose the battery pack to extreme temperatures (in excess of

60°C) or charge the battery pack for much longer than recommended.

You MUST exercise proper control of your vehicle at all times. Do not

hold a phone while you are driving; find a safe place to stop first. Do not

speak into a handsfree microphone if it will take your mind off the road.

Always acquaint yourself thoroughly with restrictions concerning the

use of cellular phones within the country you are driving and observe

them at all times.

Care must be taken when using the phone in close proximity to personal

medical devices, such as pacemakers and hearing aids.

Important Information

For most efficient use hold the phone as you would any normal

telephone. Keep the antenna pointed over your shoulder while in use.

Use only the supplied or approved replacement antenna. Unauthorized

antennas, modifications or attachments may damage the phone and

violate applicable regulations. The use of an unapproved antenna,

modification or attachment may result in the invalidation of your

guarantee – this does not affect your statutory rights.

This Panasonic mobile phone is designed, manufactured and tested to

ensure that it complies with the following specifications covering RF

exposure guidelines;

1999/519 EC, ICNIRP 1998, in accordance with ES59005 1998

ANSI C95.1-1992 (USA, Asia-Pacific), in accordance with FCC

Guidelines (FCC 1997)

AS/NZS 2772.1 (Int)-1998 (Australia), in accordance with ACA RS1999

Care and Maintenance

Pressing any of the keys may produce a loud tone. Avoid holding the

phone close to the ear while pressing the keys.

Extreme temperatures may have a temporary effect on the operation of

your phone. This is normal and does not indicate a fault.

Do not modify or disassemble the equipment. There are no user

serviceable parts.

Do not subject the equipment to excessive vibration or shock.

Avoid contact with liquids. If the equipment becomes wet immediately

remove the power and contact your dealer.

Do not leave the equipment in direct sunlight or a humid, dusty or hot

area.

Keep metallic items that may accidentally touch the terminals away from

the equipment.

Always charge the Battery Pack in a well ventilated area, not in direct

sunlight, between +5°C and +35°C. It is not possible to recharge the

battery pack if it is outside this temperature range.

Avoid recharging battery packs for longer than recommended.

Do not incinerate or dispose of the battery packs as ordinary rubbish. The

battery packs must be disposed of in accordance with local legislation

and may be recycled.

When disposing of any packing materials or old equipment check with

your local authorities for information on recycling.

Glossary of Terms

Dual Tone Multi-Frequency tones allow you to

communicate with computerized phone systems, voice

mailboxes etc.

DTMF Tones

Global System for Mobile Communications. The name given

to the advanced digital technology that your phone uses.

GSM

Home Country

Home Network

The country where your home network operates.

The GSM network on which your subscription details are

held.

Network

Operator

The organization responsible for operating a GSM network.

Used for the control of the Call Bar. Supplied by your

Service Provider.

Password

Personal Identification Number used for SIM security.

Supplied by your Service Provider. If the PIN is entered

incorrectly 3 times, the PIN will be blocked.

Personal Identification Number used for the control of

Fixed Dial Store and Call Charge metering. Supplied by

your Service Provider. If the PIN2 is entered incorrectly 3

times, the PIN2 will be blocked.

PIN2

PIN/PIN2 Unblocking Key. Used to unblock the PIN/PIN2.

Supplied by your Service Provider. If the PUK/PUK2 is

entered incorrectly 10 times, the PUK/PUK2 will be

blocked.

PUK/PUK2

The act of locking on to a GSM network. This is usually

performed automatically by your phone.

Registration

Roaming

The ability to use your phone on networks other than your

Home network.

The organization responsible for providing access to the

GSM network.

Service Provider

Subscriber Identity Module. A small smart-card which

stores unique subscriber and user-entered information

such as Phonebook and Short Messages. Supplied by your

Service Provider.

SIM

Specifications

Telephone

GSM900 Class 4

GSM1800 Class 1

Type

Temperature range

Charging

Storage

+5°C to +35°C

-20°C to +60°C

Battery – Attached to phone

Battery Pack (S)

80 g

Weight

Dimensions

Height x Width x Depth

120 x 45 x 16.4mm

Supply Voltage

3.7V DC, 650mAh Li-Ion

Standby Time - Idle Mode (h)

Talk Time (h)

Up to 170

3.5

Charge Time (min)

100

Note: Charge time will be longer when the phone is turned on. Battery life is affected

by the network you are using and the condition of the battery pack.

Notes

E-mail Settings

Use the table below to record your E-mail settings. The list may vary depending on

the Internet Service Provider.

Item

Hint

Current Setting

Profile Name

Mail Account

SMTP Server

POP3 Server

POP3 Account

Password

Service Provider Name

Your E-mail Address

Domain Name or IP Address

Reminder of Password

Leave/Delete Message*

Phone Number

Mail Delivery

Access Point

Circuit Type

User ID

Analog or Digital

Your name (or alias)

Reminder of Password

IP Address

User Password

Primary DNS

Secondary DNS

IP Address

* This function allows e-mail messages to either be removed from the server when

they have been downloaded to the phone, or they can be left on the server.

WAP Settings

Use the table below to record your WAP settings.

Item

Hint

Current Setting

Name

WAP Server Name

URL of Server

On or Off

Home URL

Security

Circuit Type

Digital Dial #

Analog Dial #

PPP ID

Analog or Digital

Phone Number

Name

PPP Password

Gateway IP

Password

IP Address

The Serial Number can be found on the outside of the phone under the battery.

For your convenience we recommend that you note the following details as a

record of your purchase.

Part Number

Serial Number

Dealer Name

Purchase Date

BULL CP8 PATENT

Information in this document is subject to change without notice. No part of these

instructions may be reproduced or transmitted in any form or by any means without

obtaining express permission from Matsushita Communication Industrial UK

Limited

7LC061A

Printed in UK

www.mcuk.panasonic.co.uk

00.285

Milwaukee Cordless Saw 6266 22 User Manual
Milwaukee Saw 6177 20 User Manual
Newcon Optik Hunting Equipment DN 463 User Manual
Night Owl Optics Home Security System 4BL User Manual
Nikon Projector HT1000 User Manual
Optoma Technology Projector TX1080 User Manual
Panamax Home Theater System MAX 5300 PM User Manual
Panasonic Answering Machine KX TG2631AL User Manual
Panasonic Universal Remote KX TEA308 User Manual
Panasonic Vacuum Cleaner MC E583 User Manual