S
P
E
C
F
I
L
E
Ceiling mount bracket for high ceilings
ET-PKE2000
Description
This ceiling mount bracket is to be used when mounting home cinema projectors to the ceiling.
Specifications Vertical correction angle:
Horizontal slant correction angle:
+5°, -20°
10°
Horizontal turn correction angle:
5°
Dimensions (W x H x D):
468 x 418 – 498 x 195 mm
(18-7/16˝ x 16-16/32˝–19-19/32˝ x 7-11/16˝)
3.0 kg (6.6 lbs)
Weight:
Weights and dimensions shown are approximate. Specifications subject to change without notice.
Parts
Attachment plate . . . . . . . . . . . . . . . . . . . . . . . 1
Safety fitting B . . . . . . . . . . . . . . . . . . . . . . . . . 1
Safety fitting C . . . . . . . . . . . . . . . . . . . . . . . . . 1
Washer-fitted hexagonal bolts (M6 x 12) . . . . 19
Washer-fitted screws (M4 x 10) . . . . . . . . . . . 10
Wire rope . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Flat wire clip . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Clamp tube . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Projector mount bracket . . . . . . . . . . . . . . . . . . 1
Adjuster pole A . . . . . . . . . . . . . . . . . . . . . . . . 1
Adjuster pole B . . . . . . . . . . . . . . . . . . . . . . . . 1
Angle adjuster A . . . . . . . . . . . . . . . . . . . . . . . . 1
Angle adjuster B . . . . . . . . . . . . . . . . . . . . . . . 1
Safety fitting A . . . . . . . . . . . . . . . . . . . . . . . . . 1
Caution:
•
•
•
•
•
All mounting work must be done by a qualified technician.
Ensure that the mounting (ceiling) area has sufficient strength.
Read the enclosed mounting instructions carefully before starting the mounting procedure.
When the system is no longer to be used, have a qualified technician promptly remove and dispose of it.
Do not use a power screwdriver or impact screwdriver to tighten screws. A torque screwdriver or similar tool
should be used.
Dimensions
Illustration shows the ET-PKE2000 attached
Attachment plate
to the PT-AE2000.
Attachement
plate
Ø49
(1-15/16˝)
Ø9.5 (3/8˝)
Ø43
(1-11/16˝)
Ø8.5
(11/32˝)
70
(2-3/4˝)
191
PT-AE2000
(7-1/16˝)
110 (4-11/32˝)
140 (5-1/2˝)
160 (6-5/16˝)
unit : mm (inch)
NOTE: This illustration is not drawn to scale.
As of September 2007
< 1 >
|