QSC Audio Stereo System 922uz User Guide

BASIS 922uz  
QSControl.net Digital System  
Inputs  
DSP  
Outputs  
QSControl.net, QSC’s next generation network audio  
system, achievestheseamlessintegrationofthecompany’s  
signal transport, control, processing, and monitoring  
technologies. QSControl.net brings together QSC’s digital,  
poweramplificationandloudspeakerproductsintoaunified  
system that enables the user to administrate it all via a fully  
integrated graphical user interface. The new generation  
BASISdevicesaredesignedtooperateunderthecompany’s  
QSControl.net platform.  
Analog  
CobraNet  
16 of 32  
DataPort  
4(8 channels)  
CobraNet  
32  
8 universal mic/line  
24 x 24  
Features  
• Universal inputs - mic/line with pre-amps and phantom power  
• Amplifier and loudspeaker control, monitoring and protection  
• Configurable DSP functions and signal paths  
• Fixed latency DSP engine  
BASIS 922uz  
The BASIS platform meets the control, monitoring, signal  
transport and processing needs of amplification and  
loudspeaker systems over an Ethernet network. The BASIS  
922uz units combine three distinct QSC technologies  
within a single hardware unit. Amplifier and loudspeaker  
control, monitoring and protection, configurable DSP, and  
CobraNet™ audio transport are seamlessly integrated into  
one powerful single RU package.  
• Ethernet controllable  
• CobraNet audio transport with new intuitive GUI  
• Two Ethernet ports – CobraNet and control can be run over a single cable  
or be divided between the two ports. The CobraNet port is 100Base-T. The  
control port is 10Base-T  
• Each unit can store eight design configurations that can be changed on the fly  
• Snapshots can recall config or block and/or parameter settings  
• THX™ approved for professional cinema applications  
DSP functions include, but are not limited to:  
• Matrix mixer – any size, up to 24 x 24  
Through QSControl.net, QSC’s BASIS and next-generation  
RAVE and DSP products can be networked together and  
controlled from a single software interface. In addition,  
multiple networked computers can be set up to control  
and monitor all of the units simultaneously.  
• Automixers – gain sharing  
• Routers – any size, up to 24 x 24  
Fixed Latency DSP  
• Gain controls – any channel count, up to 24  
• Graphic equalizers  
Users of most other configurable DSP systems are  
familiar with a variable latency inherent in the processing  
configuration. Add more processing blocks and you  
also add delay, whether you want it or not. QSC’s DSP  
engine is unique in having a short and fixed processing  
latency through the DSP subsystem. When the A/D and  
D/A converters are included, the total analog-to-analog  
latency of a single unit is a negligible 2.354 milliseconds.  
QSC’s fixed latency DSP is configurable DSP that stays  
fast and predictable from one configuration to the next.  
• Filters – high-pass, low-pass, all-pass, shelf, parametric, parametric shelf,  
Butterworth high and low-pass, Linkwitz-Riley high and low-pass,  
Bessel-Thomson high and low-pass  
• Crossovers – Linkwitz-Riley, Butterworth, Bessel-Thomson in-phase, Bessel-  
Thomson symmetrical, 2-way, 3-way, and 4-way general purpose adjustable  
• Compressors, peak limiters, AGC’s, gates, dynamics processor  
• Duckers – up to 8 channels, up to 60 seconds fade in and fade out times,  
priority mix  
• Pink noise, white noise, sine generators  
• Delays  
CobraNet is a trademark of Cirrus Logic, Inc.  
THX is a trademark of THX Ltd.  
• Macros – user-definable custom blocks with password protection  
 

Radica Games Games G71029 User Guide
Radica Games Video Games N7315 User Guide
RCA Camcorder CC6372 User Guide
RCA DVD Player 7L400MDV User Guide
ResMed Sleep Apnea Machine S8 AUTOSETTM II User Guide
Sakar Digital Camera 89379 User Guide
Sanyo Projector PLC XF47K User Guide
Sears Oven 30129 User Guide
Sears Tiller 91729149 User Guide
SECO LARM USA Door SD 993B SS User Guide