St o r in g Ra d io St a t io n s in M e m o r y
You can store 20 stations (10 AM and 10 FM) in memory by using the PRESET/
m in i AM / FM
St e r e o w it h
c a sse t t e p l a y e r
Be f o r e y o u b e g in
Ca r e a n d M a in t e n a n c e
STORE and RECALL/SET buttons. These are called preset radio stations. To store
Cl e a n in g t h e Ex t e r io r
1. Make sure the radio is on by pressing RADIO ON/OFF, the display lights.
2. Select the desired band (AM or FM) by pressing BAND.
•
Turn unit off before cleaning the exterior with a soft dust cloth.
Belt clip
3. Select the station you want to preset (store in memory) by using the
TUNING + and — buttons.
Ta p e Ca r e
•
Don’t expose tapes to sunlight or store in hot places. High temperatures may
4. Press PRESET/STORE button (MEMO for memory flashes in display for
approximately 5 seconds). You must complete steps 5 and 6 within this 5-
second time period while MEMO is flashing in the display.
warp the shell or damage the tape itself.
Battery compartment
door
•
•
Keep cassettes in their boxes when not in use.
Cassette tapes can be erased by magnetic fields produced by magnets,
electric motors, electrical transformers, and other devices. Keep tapes away
from magnets and magnetic fields.
5. Press the RECALL/SET button to select the preset channel location. The first
time you press the button, CH 1 (channel 1) is selected and appears in the
display. Each time you press the button, you advance one channel.
6. Press PRESET/STORE button to store the station as a preset station (MEMO
disappears from the display when the station has been successfully stored).
The station you selected in step 3 is now stored in the preset CH number
shown in the display.
Cl e a n in g t h e Ta pe H e a d s
Iron oxide particles from the magnetic tape can build up on the parts that come
in contact with the tape. These deposits can cause incomplete erasure, muffled
playback sound, and might prevent automatic stop.
Ba t t e r y Po w e r
This unit is powered by 2 “AA” size alkaline batteries. Open the battery
compartment door on the back of the unit by pressing down and sliding the
door in the direction of the arrow. Insert batteries as shown on the unit.
Make sure the unit is turned off and allow 30 minutes drying time when using a
liquid cleaner. To clean a cassette tape, open the compartment door, push the
PLAY button and gently clean the heads, capstan, and pinch wheel with a head
cleaner.
No t e : Storing a station in memory automatically erases the station that was
previously stored in that memory location (preset location).
Ba t t e rie s Do n ' t La st Fo re ve r
If you're not going to use your mini stereo/cassette player for more than a
month, be sure to remove the batteries, or they might leak and cause you
all kinds of problems.
l ist e n in g t o a p r e se t st a t io n
1. Make sure the radio is on by pressing RADIO ON/OFF.
2. Select the desired band (AM or FM) by pressing BAND.
Clean heads after every 25
hours of use.
Th e Cl ip
•
Demagnetize the head
occasionally with a head
demagnetizing cassette
(available from many
audio equipment stores).
3. Press and release the RECALL/SET button until the desired preset station
appears in the display.
The clip enables you to carry your mini stereo on a belt. This belt clip can be
removed by lifting up the lock key while simultaneously pushing it in the
direction of the arrow.
Clean these parts
No t e : Preset stations will remain in memory for about 30 minutes when
replacing batteries. If you have removed the batteries for more than 30
minutes, you may need to store stations in memory again.
H e a d p h o n e s
You must plug the headphones into the PHONES jack on the side of the unit to
hear the radio or cassette tape. Turn the volume down before you put on the
headphones and increase the volume to desired level after they are in place.
•
Never use any metal
objects on or near the
tape heads.
RP-18 8 2
Do not allow any
cleaning material to fall
into the tape assembly.
m a x im iz in g a m r e c e p t io n
For best AM reception, place the unit in a vertical position (with the volume
knob and headphone jack facing up) when listening to AM stations.
Maximum AM station reception can also be obtained by laying the unit on
its back with the belt clip resting on a table or the floor.
Ge n e r a l Co n t r o l s
Quit Slacking
A
A little bit of slack in your tapes can cause
scratches on the tape, or worse yet, the tape
Vo l u m e
Usin g t h e c a sse t t e Ta p e Pl a y e r
To adjust the sound level, turn the VOLUME control on the side of the unit.
could break. If you notice some slack in the tape,
use a pencil to tighten it up before you insert it.
BASS BO O ST
Turn BASS BOOST (on the side of the unit) ON for enhanced bass effect. Turn
BASS BOOST to OFF position for normal bass sound.
FCC IN FO RM ATIO N
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired
operation.
Lim it e d Wa r r a n t y
REVERSE
MODE
FWD
REW
What your w arranty covers:
PLAY
STOP
Usin g t h e Ra d i o
•
Any defect in materials or workmanship.
For how long after your purchase:
One year.
In accordance with FCC requirements, changes or modifications not expressly approved by
Thomson Consumer Electronics could void the user’s authority to operate this product.
•
Display
(The warranty for rental units begins with the first rental.)
This device generates and uses radio frequency (RF) energy, and if not installed and used
properly, this equipment may cause interference to radio and television reception.
What w e w ill do:
BAND
button
Th e Bu t t o n s
•
•
Provide you with a new, or at our option, a refurbished unit.
If this equipment does cause interference to radio or television reception (which you can
determine by turning the equipment off and on), try to correct the interference by one or
more of the following measures:
RADIO
ON/OFF
button
The exchange unit is under warranty for the remainder of the original product’s warranty
period.
DIR
Shows you the direction the tape is playing.
Press and lock to advance tape forward.
Press and lock to play a tape.
DIGITAL AM/FM PERSONAL STEREO RADIO CASSETTE PLAYER
F FWD
How to m ake a w arranty claim :
•
Reorient the receiving antenna (that is, the antenna for the radio or television that is
“receiving” the interference).
PLAY
DIGITAL TUNING
•
Properly pack your unit. Include any cables, etc., which were originally provided with the
product. We recommend using the original carton and packing materials.
RADIO ON/OFF
BAND AM/FM
QUICK REVERSE
REV. MODE
REV. MODE
Press to change tape direction.
•
Move the unit away from the equipment that is receiving interference.
•
Include in the package evidence of purchase date such as the bill of sale. Also print your
name and address and a description of the defect. Send standard UPS or its equivalent to:
RECALL SET
PRESET STORE
If these measures do not eliminate the interference, please consult your dealer or an
experienced radio/television technician for additional suggestions. Also, the Federal
Communications Commission has prepared a helpful booklet, “How To Identify and
Resolve Radio TV Interference Problems.” This booklet is available from the U.S.
Government Printing Office, Washington, DC 20402. Please specify stock number 004-000-
00345-4 when ordering copies.
Select to play both sides of the tape continuously.
RADIO TUNING
RECALL/SET
button
When started from Side A, unit plays back both sides of
the tape and stops. When started from Side B, the unit
stops after Side B is finished playing.
Thom son Consum er Electronics, Inc.
Product Exchange Center
32 Spur Drive
PRESET/STORE
button
El Paso, Texas 79906
REW
Press and lock to advance tape backward.
Press to stop PLAY, F FWD, or REW.
•
•
Pay any charges billed to you by the Exchange Center for service not covered by the
warranty.
TUNING + and —
buttons
STOP
H e a d se t Sa f e t y
A new or refurbished unit will be shipped to you prepaid freight.
•
Do n o t p la y yo u r h e a d se t a t a h ig h vo lu m e . Hearing experts advise against
Pl a y in g a c a sse t t e t a p e
1. Open the tape deck door by using the indexes on the side of the door and
•
•
Press the RADIO ON/OFF button to turn the radio on. The last band and
radio station frequency selected appear in the display.
What your w arranty does not cover:
continuous extended play.
•
Customer instruction. (Your Owner’s Manual pr ovides information regarding operating
instructions and user controls. For additional information, ask your dealer.)
•
•
If you experience a ringing in your ears, reduce volume or discontinue use.
pulling the door open.
To choose between AM and FM radio bands, press the BAND button. The
last station and band selected appear in the display.
You should use extreme caution or temporarily discontinue use in potentially
hazardous situations.
•
•
•
•
•
•
Installation and set-up service adjustments.
Batteries.
2. Insert a tape with the exposed tape facing toward the top of the unit.
3. Press REW or F FWD to move tape to the desired starting point.
3. Press and lock the PLAY button on the top of the unit.
•
Even if your headset is an open-air type designed to let you hear outside sounds,
don't turn up the volume so high that you can't hear what's around you.
Note: ST appears in the display when you are receiving a station broadcasting
in FM Stereo. The FM radio station must be transmitting in stereo for you to
receive the broadcast in stereo. AM stations are received in mono only and ST
does not appear in display.
Damage from misuse or neglect.
Products which have been modified or incorporated into other products.
Products purchased or serviced outside the USA.
Acts of God, such as but not limited to lightning damage.
Important: The cassette tape won’t play if the radio is on.
•
To change the radio station one channel at a time, press and release the
TUNING + and — buttons to advance up and down the scale.
How state law relates to this w arranty:
Usin g Au t o Re v e r se / Co n t in u o u s Pl a y
To continuously play both sides of the tape, set the REV MODE switch to
To play each side of the tape once, set the REV MODE switch to
•
This warranty gives you specific legal rights, and you may have other rights which vary
from state to state.
Au t o m a t ic St a t io n Se e k
If you purchased your product outside the USA:
This warranty does not apply. Contact your dealer for warranty information.
•
The Seek feature automatically searches up and down the scale for the next
station with a strong signal. Pressing and holding TUNING + or TUNING – for
approximately 1 second causes the unit to automatically seek up or down the
scale and stop at the next frequency where a strong signal is being received.
Note: You must start playback on side A when you choose REV MODE
P.O. Box 1976, Indianapolis, IN 46206
Model RP-1882
15307600 (Rev.1 E/S)
98-00
The DIR indicator shows you which direction the tape is going. To change tape
direction, press the QUICK REVERSE button.
© 1998 Thomson Consumer Electronics, Inc.
Trademark(s) ® Registered
Marca(s) Registrada(s)
Printed in China
|