Catalog #
Type
COMBOLIGHT® COMBO CLASSIC RECESSED
LAMP GROUP 2 - CONFIGURATION “E”
Project
TWO (2) T4 G8.5 Metal Halide lamp cells - TWO (2) Fluorescent lamp cells
New Construction Recessed Housing - Trim or Trimless
DESCRIPTION:
An adjustable recessed fixture
suitable for multiple downlighting
B
applications with one point of elec-
Aromat®
Electronic
Metal Halide
Ballasts
trical entry. Mixes the use of metal
halide lamps with fluorescent
lamps. Powder coat finish on hous-
ing & lamp assembly.
Dual Fluorescent lamp cells
w/ integral ballast accessible from below
9.50"
Ballast
Integral reflector
Ballast
Integral reflector
CONSTRUCTION:
Housing, Plaster Frame & Trim
Assembly: 18 gauge CRS. J-Box
Assembly: 16 gauge CRS (galva-
nized). Fixture is offered with a .75”
ceiling trim or as a trimless fixture.
Can accommodate 0.50” to 1.00”
ceiling thickness.
Thermal Protector
6.90"
6.90"
C
C
A
380º x 45º locking
angular adjustment
45º visual cut-off
Must specify a diffuser or louver
for fluorescent cell. See below.
LAMP ASSEMBLY:
Ceiling compund
is applied right
to the edge of the
fixture opening
Butterfly
Brackets
Two T4 G8.5 Metal Halide lamp
cells with two fluorescent lamp
cells . Can accept up to two optical
accessories. 380º x 45º locking
lamp adjustment. Provides 45º
visual cut-off. Utilizes a sophisti-
cated all aluminum reflector with
distributions of 15º, 27º and 55º
spreads.
for Black Iron
Mounting
0.75" Trim
7.00"
8.75"
SYSTEM PROTECTION:
Thermal protection provided to
guard against overheating, and
misuse of insulation over and
around fixture. Vent holes in hous-
ing provide cooler operation
Luminance / Performance Comparison to Regular H.I.D. Lamps
Regular MH Lamp T4 G8.5 MH Lamp
35W = 2000 70W = 4850 35W = 3300 70W = 6600
Custom configurations are available
with Combo Classic fixtures. Also
available with T8 fluorescent lamps.
Consult RSA for details
Initial Lumens
Rated Lamp Life 35W = 9000 hrs 70W = 9000 hrs 35W = 9000 hrs 70W = 9000 hrs
ELECTRICAL:
Fixture is two circuit.
Fluorescent >> BX40 BX50 PLL80 PLT26 PLT32
T5HO54
PLT42 T528 T535 T5HO39
Circuit 1: Integral Aromat® elec-
tronic metal halide ballasts for
T4 G8.5 metal halide lamps.
A
B
C
65.18” 65.18” 65.18” 30.18” 31.18” 33.18” 112.18” 136.18” 88.18” 112.18”
81.98” 81.98” 81.98” 46.98” 47.98” 49.98” 128.98” 152.98” 104.48” 128.98
Lamp Group 2
Metal Halide
Circuit 2: Integral electronic bal-
lasts for fluorescent lamps.
Lutron® dimming ballasts avail-
able upon request.
25.50” 25.50” 25.50” 8.00” 8.50” 9.50” 49.00” 61.00” 37.00”
49.00”
CR2TC35
E
BX40
BK
WH
27
120
ORDERING EXAMPLE:
= Two T4 G8.5 Metal Halide 35W lamps with Two BIAX® 40W Fluorescent • Black Interior • White Trim • 27º reflector • 120 volts
Junction box is UL listed for
through branch wiring, for 8 #12,
90°C supply conductors or 60°C for
end of run (access above ceiling
not required).
Fluorescent Diffusers and Louvers - Please specify
Optional Accessories - See RSA Combo Classic accessory page for details.
❑ TWD - Textured White Diffuser ❑ CB1 - 2” Parabolic Louver
❑ MPD - Conical Prism Diffuser
❑ CB2 - 1” Parabolic Louver
Baffle
Snoots
Louvers
Lenses
Item # / Lamp Type
Lamp CR2TC35 - T4 G8.5 MH 35W
Configuration
Fluorescent Lamp
BX40 - 40W BIAX®
BX50 - 50W BIAX®
PLL80 - 80W PL-L
PLT26 - 26W PL-T
PLT32 - 32W PL-T
PLT42 - 42W PL-T
T528 - 28W T5
Interior Finish Trim Finish
Distribution
15 - 15º Narrow Reflector 120 - 120 Volts
Voltage
BK - Black
WH - White
S - Silver
BK - Black
E - Two T4 G8.5
Metal Halide
lamp cells with
Two Fluorescent
lamp cells
Group 2
Metal
CR2TC70 - T4 G8.5 MH 70W
WH - White 27 - 27º Medium Reflector 277 - 277 Volts
S - Silver
55 - 55º Wide Reflector
Halide
PT - Custom PT - Custom
TR - Trimless
T535 - 35W T5
T5HO39 - 39W T5HO
T5HO54 - 54W T5HO
T8 lamps also available
SPECIFY -
E
___
___
___
___
___
___
RSA LIGHTING LLC 9660 - 9700 TOPANGA CANYON BLVD. CHATSWORTH CA. 91311
©2003 RSA Lighting LLC All Rights Reserved • Specifications subject to change without notice.
•
•
•
RSA LIGHTING
®
|