14-543.fm Page 1 Wednesday, June 30, 1999 3:52 PM
Cat. No. 14-543
OWNER’S MANUAL
Please read before using this equipment.
CD-3319
Portable Triple Play Compact Disc Player
and AM/FM Stereo Cassette Recorder
14-543.fm Page 3 Wednesday, June 30, 1999 3:52 PM
Auxiliary Input Jacks — let you con-
nect an additional audio source such
as a TV, VCR, turntable, external CD
changer or a cassette deck to your
system.
Warnings:
• This system employs a laser light
beam. Only a qualified service
person should remove the cover
or attempt to service this device,
due to possible eye injury.
For your records, we recommend you
record the serial number of the CD-
3319 in the space provided. The serial
number is in the battery compartment.
• The use of controls, adjustments,
or procedures other than those
specified herein may result in haz-
ardous radiation exposure.
Serial Number __________________
Warning: To prevent fire or shock
hazard, do not expose this product to
rain or moisture.
The CD player in this stereo system is
made and tested to meet exacting
safety standards. It meets UL and
FCC requirements and complies with
safety performance standards of the
U.S. Department of Health and Hu-
man Services. With proper care, this
CD player should give you years of
trouble-free service.
CAUTION
RISK OF ELECTRIC SHOCK.
!
DO NOT OPEN.
CAUTION: TO REDUCE THE RISK OF
ELECTRIC SHOCK, DO NOT REMOVE
COVER OR BACK. NO USER-SERVICE-
ABLE PARTS INSIDE. REFER SERVIC-
ING TO QUALIFIED PERSONNEL.
CDs that can be
played on this
player have this
mark on them:
This symbol is intended to alert you
to the presence of uninsulated dan-
gerous voltage within the product’s
enclosure that might be of sufficient
magnitude to constitute a risk of
electric shock. Do not open the
product’s case.
Note: Most material on compact discs
and pre-recorded tapes is copyright-
ed. Unauthorized duplication of copy-
righted material is a violation of the
copyright laws of most countries and
such duplication may result in fines
and/or imprisonment. Note, however,
that in the United States, it is not a vio-
lation of U.S. copyright laws for a con-
sumer to use an audio recording
device to duplicate musical recordings
for noncommercial (personal) use.
This symbol is intended to inform
you that important operating and
maintenance instructions are in-
cluded in the literature accompany-
ing this product.
!
3
14-543.fm Page 4 Wednesday, June 30, 1999 3:52 PM
CONTENTS
Preparation ........................................................................................................... 5
Connecting the Speakers ................................................................................ 5
Attaching the Speakers ............................................................................. 5
Connecting the Speaker Wires ................................................................. 6
Connecting an Auxilary Audio Source ............................................................. 6
Connecting Power ........................................................................................... 7
Using AC Power ........................................................................................ 7
Using Batteries .......................................................................................... 7
Using Your Vehicle’s Battery ..................................................................... 8
Using Headphones .......................................................................................... 9
Listening Safely ......................................................................................... 9
Traffic Safety ............................................................................................. 9
Radio Operation ................................................................................................. 10
CD Player Operation .......................................................................................... 11
Loading a CD ................................................................................................. 11
Playing a CD .................................................................................................. 11
Programming Tracks ..................................................................................... 12
Storing/Playing a Programmed Sequence .............................................. 12
Checking a Programmed Sequence ....................................................... 13
Erasing a Programmed Sequence .......................................................... 13
Special CD Player Features .......................................................................... 14
Automatic Search Music System (ASMS) ............................................... 14
Audible Search ........................................................................................ 14
Repeat Play ............................................................................................ 15
Intro Play ................................................................................................. 15
Shuffle Play ............................................................................................. 15
CD Care Tips ................................................................................................. 16
Cassette Player Operation ................................................................................ 17
Loading a Cassette Tape ............................................................................... 17
Playing a Cassette Tape ................................................................................ 17
Recording on a Cassette Tape ...................................................................... 18
Recording from a CD .............................................................................. 18
Recording from the Radio ....................................................................... 19
Recording from an Auxiliary Audio Source .............................................. 19
Tape Care Tips .............................................................................................. 20
Preventing Accidental Erasure ................................................................ 20
Erasing a Cassette Tape ......................................................................... 20
Restoring Tape Tension and Sound Quality ............................................ 20
Care and Maintenance ....................................................................................... 21
FCC Information ............................................................................................ 22
Cleaning the Tape-Handling Parts ................................................................. 22
Specifications ..................................................................................................... 23
4
14-543.fm Page 5 Wednesday, June 30, 1999 3:52 PM
PREPARATION
Important:
Place the speakers so the distance
between them is the same as the dis-
tance between the listening area and
a point halfway between the speakers.
If the distance between the speakers
is greater, you can improve the stereo
effect by angling the speakers in to-
ward the listening area.
• Complete all connections to the
CD-3319 before you connect it to
power.
• Be sure to follow all of the installa-
tion instructions described in the
enclosed “Important Safety In-
structions.”
CONNECTING THE
SPEAKERS
Attaching the Speakers
To attach the supplied speakers to the
CD-3319, slide each speaker down
into the grooves on each side of the
CD-3319 until it clicks.
To increase the bass effect, place the
speakers in corners, against the wall,
or directly on the floor. To decrease
the bass effect, move the speakers
slightly away from the wall, or raise
them 6 or more inches off the floor.
You can purchase speaker stands at
your local Radio Shack store.
To detach each speaker, press and
hold the speaker’s locking latch away
from the CD-3319, then lift the speak-
er straight up.
Note: If you want to connect speakers
other than the supplied ones, use
speakers with an impedance of 4
ohms.
5
14-543.fm Page 6 Wednesday, June 30, 1999 3:52 PM
Connecting the Speaker
Wires
CONNECTING AN
AUXILIARY AUDIO
SOURCE
Follow these steps to connect the
speaker wires to the CD-3319.
To connect an auxiliary audio source
to your CD-3319, such as a TV or
VCR, plug the audio source’s left and
right line level audio wires into AUX L
(left) and AUX R (right).
1. Unwind as much speaker wire as
you need from the back of each
speaker, then slide the wire
through one of the slots on the
back of each speaker to hold it in
place.
Set FUNCTION to AUX to select and
listen to an auxiliary audio source.
2. Insert the left speaker’s plug into
SPEAKER L on the back of the
CD-3319, then insert the right plug
into SPEAKER R.
Note: Be sure to match the posi-
tive side of the plug to the positive
side of the terminal, and the nega-
tive side to the negative.
6
14-543.fm Page 7 Wednesday, June 30, 1999 3:52 PM
Using Batteries
CONNECTING POWER
You can power the CD-3319 from nine
D batteries (not supplied). For the best
results, we recommend alkaline batter-
ies (such as Radio Shack Cat. No. 23-
550).
You can power the CD-3319 from any
of the following:
• AC power using the supplied AC
power cord
• Nine D batteries (not supplied)
• Vehicle battery power using a DC-
to-AC inverter (not supplied)
Using AC Power
To power the CD-3319 from standard
AC power, plug the supplied AC pow-
AC IN~
er cord into the
jack, then plug
the other end into a standard AC out-
let.
1. Press the two latches on the bat-
tery compartment cover and pull
out the cover to remove it.
2. Place the nine D batteries in the
compartment as indicated by the
polarity symbols (+ and –) marked
next to the battery compartment.
Cautions:
• Use only fresh batteries of the
required size and type.
Caution: The supplied AC power cord
has a polarized plug that fits into the
outlet only one way. If the plug does
not fit properly, turn it over and try
again. Do not force it.
• Never mix old with new batter-
ies.
• If you do not plan to use the
batteries in the CD-3319 for a
month or more, remove the bat-
teries to protect the CD-3319
from possible battery leakage.
Note: The CD-3319 automatically dis-
connects internal batteries when you
connect the AC power cord.
7
14-543.fm Page 8 Wednesday, June 30, 1999 3:52 PM
3. Replace the battery compartment
cover.
meet these specifications could
damage the CD-3319.
Cautions:
• If the CD-3319 does not operate
properly or if the sound weakens
or distorts, replace the batteries.
• Always dispose of the old batter-
ies promptly and properly.
• Never leave dead, old, or weak
batteries in the CD-3319. They
can leak chemicals and corrode or
damage electronic circuits.
1. Plug the supplied power cord into
AC IN~
the
CD-3319.
jack on the back of the
Using Your Vehicle’s Battery
You can power the CD-3319 from
your vehicle’s battery using a DC-to-
AC inverter (Cat. No. 22-132, not sup-
plied).
2. Plug the AC power cord into the
power inverter’s AC jack.
3. Plug the power inverter into your
vehicle’s cigarette lighter socket.
Cautions:
4. Turn on the power inverter.
• To protect your vehicle’s electrical
system, always plug the AC power
Note: If the CD-3319 does not oper-
ate properly when you use the invert-
er, unplug the inverter from the
cigarette lighter socket and clean the
socket to remove ashes and debris.
Also, check the AC power cord for
proper connection. If it still does not
operate properly, check the fuse in the
inverter.
AC IN~
cord into
and the inverter
before you plug the inverter into
the cigarette lighter socket.
Always turn off the inverter and
unplug it from the cigarette lighter
socket before you unplug the AC
AC IN~
power cord from
inverter.
and the
• The recommended inverter sup-
plies 120 volts AC power and
delivers at least 315 milliamps.
Using an inverter that does not
8
14-543.fm Page 9 Wednesday, June 30, 1999 3:52 PM
Listening Safely
USING HEADPHONES
To protect your hearing, follow these
guidelines when you use headphones.
For private listening, you can connect
a pair of stereo headphones (not sup-
plied) with a /8-inch plug. Your local
Radio Shack store carries a wide se-
lection of stereo headphones.
1
• Set the volume to the lowest set-
ting before you begin listening.
After you begin listening, adjust
the volume to a comfortable level.
To connect the headphones, insert the
headphones’ 1/8-inch plug into the
• Do not listen at extremely high
volume levels. Extended high-
volume listening can lead to
permanent hearing loss.
PHONES
jack.
• Once you set the volume, do not
increase it. Over time, your ears
adapt to the volume level, so a
volume level that does not cause
discomfort might still damage your
hearing.
Traffic Safety
Note: Connecting headphones auto-
matically disconnects the built-in
speaker.
Do not wear headphones while oper-
ating a motor vehicle or riding a bicy-
cle. This can create a traffic hazard
and is illegal in some areas.
Even though some headphones are
designed to let you hear some outside
sounds when listening at normal vol-
ume levels, they still present a traffic
hazard.
9
14-543.fm Page 10 Wednesday, June 30, 1999 3:52 PM
RADIO OPERATION
Warning: To protect your hearing, set
VOLUME to its lowest setting before
you turn on the radio.
Notes:
• For the best AM reception,
rotate the CD-3319 to position
the built-in AM antenna.
Follow these steps to use the radio.
• For the best FM reception, fully
extend the telescoping an-
tenna and swivel it to the posi-
tion that produces the best
reception.
1. Set FUNCTION to RADIO to turn on
the radio. The POWER indicator
lights.
• The FM STEREO indicator
lights when you receive an FM
signal in stereo.
• If FM stereo reception is noisy,
set MODE/BEAT-CUT to MONO.
The sound is no longer in ste-
reo, but reception should
improve.
2. Set BAND to FM or AM.
5. Adjust VOLUME, TONE and BAL-
ANCE to the desired levels.
3. Adjust TUNING to the desired sta-
tion.
6. Press E-BASS to enhance the
bass sounds while playing the
radio. Press the button again to
turn the extended bass system off.
4. Set MODE/BEAT-CUT to STEREO
(0 or 1) for stereo sound on FM
stations.
7. Set FUNCTION to TAPE to turn off
the radio.
10
14-543.fm Page 11 Wednesday, June 30, 1999 3:52 PM
CD PLAYER OPERATION
LOADING A CD
PLAYING A CD
1. Set FUNCTION to CD. The
POWER indicator lights, and
dISC appears in the display.
1. After loading a CD, press PLAY/
PAUSE
the CD starting with the first track.
The display shows , the cur-
. The CD player plays
rent track number, and the
elapsed time.
2. Press
PUSH OPEN on the CD
compartment cover. The CD com-
partment opens.
Notes:
• To repeat, skip over, or search
for tracks, see “Special CD
Player Features.”
• A sudden shock or jolt while a
CD is playing might suddenly
change the CD’s rotation speed
or cause the CD player to skip
the track it is playing and, as a
result, mute or distort the sound
momentarily. This is not a mal-
function.
3. Place a CD in the compartment
with the label facing up.
2. Adjust VOLUME, TONE and BAL-
ANCE to the desired levels.
4. Close the compartment door.
Within a few seconds, the display
shows the CD’s total number of
tracks and total playing time.
11
14-543.fm Page 12 Wednesday, June 30, 1999 3:52 PM
Warning: Your CD-3319 CD
player has a wide dynamic range.
If you turn the volume too high
during the low volume sections of
a program, you might damage
your hearing during sudden loud
sections.
Note: If you do not stop the CD
player, it plays to the end of the
last track and automatically stops.
When the CD player is stopped,
disappears from the display
and the total number of tracks
appears.
E-BASS
PUSH
after the CD stops turning.
3. Press
to enhance the
6. To remove the CD, press
OPEN
bass sounds while playing the CD.
Press the button again to turn it
off.
Caution: Remove a loaded CD before
you move the CD-3319 to prevent
possible damage to the CD or the CD
player.
PROGRAMMING
TRACKS
4. To temporarily stop play, press
Storing/Playing a
Programmed Sequence
PLAY/PAUSE
.
appears on
PLAY/PAUSE
the display. Press
again to resume play.
You can program the CD player to play
up to 16 tracks in any order you
choose.
STOP/
1. If a CD is playing, press
CLEAR
to stop it. The CD’s total
number of tracks and total playing
time appear on the display.
PROGRAM
PROGRAM
2. Press
.
and 00
5. To completely stop play, press
STOP/CLEAR
P- 01(the first memory position)
.
appear on the display.
12
14-543.fm Page 13 Wednesday, June 30, 1999 3:52 PM
3. Select the track you want by
Checking a Programmed
Sequence
pressing SKIP/SEARCH
or
.
The track number you
selected appears on the display.
To check the programmed sequence,
while the CD is stopped, repeatedly
press PROGRAM. The display shows
each stored track number.
4. Press PROGRAM. The selected
track is stored, and the next pro-
gram number appears on the dis-
play.
5. Repeat Steps 3 and 4 to store up
to 16 tracks.
Notes:
• You can store the same track
more than once.
Erasing a Programmed
Sequence
• When 16 tracks are pro-
grammed, C -01and the first
track’s number appear on the
display.
Any of the following will erase a pro-
grammed sequence:
6. To complete programming and
play the programmed sequence,
PROGRAM
• Press STOP/CLEAR
until
clears from the display and the
CD’s total number of tracks and
playing time appear.
press PLAY/PAUSE
player begins playing the first
track of the programmed
. The CD
sequence. The display shows the
play indicator, the current track
number, and the current track’s
elapsed playing time.
• Press STOP/CLEAR
press PUSH OPEN after the CD
stops turning.
.
Then
• Set FUNCTION to another position.
• Disconnect the power source.
Notes:
• Programming is not completed
until you press PLAY/PAUSE
.
• To repeat, skip over, or search for
tracks, see “Special CD Player
Features.”
13
14-543.fm Page 14 Wednesday, June 30, 1999 3:52 PM
rest of the last track and begins
playing the first track.
SPECIAL CD PLAYER
FEATURES
To select a track while the CD player
is stopped or during pause, press
Automatic Search Music
System (ASMS)
SKIP/SEARCH
or
until the
desired track number appears on the
You can use ASMS to search through
the CD to select a desired track or
programmed sequence.
PLAY/PAUSE
display. Then press
to play the track.
Audible Search
While playing any track on a CD, you
SKIP/
can press and hold down
SEARCH
or
to search
through the track to find a desired sec-
tion. You hear the music at a higher
speed and lower volume while the CD
player searches.
To select a track during play:
SKIP/SEARCH
• Press and release
to return to the beginning of
the current track.
SKIP/SEARCH
• Press and release
to skip forward to the begin-
ning of the next track.
SKIP/SEARCH
• Repeatedly press
or to skip backward or
forward through additional tracks.
SKIP
• Press and hold down
/
SEARCH
for forward search.
Notes:
• If you repeatedly press
SKIP/
• Press and hold down
SEARCH
SKIP/
for reverse search.
SEARCH
while the first track
is playing, the last track begins
playing.
SKIP/
To resume normal play, release
SEARCH
.
or
SKIP/
• If you repeatedly press
SEARCH
while the last track
is playing, the CD-3319 skips the
14
14-543.fm Page 15 Wednesday, June 30, 1999 3:52 PM
Note: Intro play does not work with a
programmed sequence.
Repeat Play
You can repeat a single track, the en-
tire CD, or a programmed sequence.
While the CD player is stopped, press
INTRO
MODE until
appears on the dis-
• To repeat a single track, press
MODE before or during play.
appears on the display and the
CD player repeatedly plays the
selected track.
play. Then press PLAY/PAUSE
The CD player plays the first 10 sec-
onds of each track.
.
REPEAT
After it plays the first 10 seconds of
the last track during intro play, the CD
player stops playing and the display
shows the total number of tracks and
the total playing time.
• To repeat the entire CD, press
MODE twice before or during play.
REPEAT
ALL
appears on the display,
and the CD player repeatedly
plays the entire CD.
During intro play, if you want to listen
to a specific track within 10 seconds
after it begins playing, press PLAY/
• To repeat a programmed se-
quence, press MODE twice before
or during programmed play.
PAUSE
again to turn off intro play
and resume normal play.
PROGRAM
REPEAT
ALL
and
appear on
the display and the CD player
repeatedly plays the programmed
sequence.
Shuffle Play
During shuffle play, the CD player
plays all the tracks on a CD once, se-
lecting them in random order.
To cancel repeat play at any time,
REPEAT
REPEAT
ALL
press MODE until
or
disappears from the display.
Notes:
Intro Play
• None of the tracks are played
more than once.
During intro play, the CD player scans
through all the CD’s tracks, playing
the first 10 seconds of each track.
• Shuffle play does not work with a
programmed sequence or repeat
play.
15
14-543.fm Page 16 Wednesday, June 30, 1999 3:52 PM
• You must select shuffle play
before playback. If you select
shuffle play while a CD is playing,
• Keep CDs dry. A water drop can
act as a lens and affect the laser
beam’s focus.
SHUFFLE
appears on the display but
• Always handle a CD by the edges
to avoid getting fingerprints on the
CD and always keep it in its pro-
tective case or sleeve when not in
use. Fingerprints and scratches
on the CD’s surface can prevent
the laser beam from correctly
reading the digital information. To
clean the CD surface, use a CD
Cleaner Kit (such as Cat. No. 42-
225).
the function does not work.
SHUFFLE
Before play, press MODE until
appears on the display. Then press
PLAY/PAUSE
. The CD player se-
lects and plays each of the tracks ran-
domly. After all of the tracks have
played once, the CD player automati-
cally stops.
• If you move the player from a cold
place to a warmer one, moisture
might condense on the pickup
lens, preventing proper disc play.
If this happens, wait 2 hours
before attempting to operate it
again.
CD CARE TIPS
Even though a compact disc is very
durable, treat the CD surface with
care. We recommend the following
precautions:
• Do not place anything but a CD in
the disc tray. This can damage the
drive mechanism.
• Do not write on either side of the
CD, particularly the non-label
side. (Signals are read from the
non-label side.)
• Do not store CDs in high-tempera-
ture, high-humidity locations. The
CDs might warp.
16
14-543.fm Page 17 Wednesday, June 30, 1999 3:52 PM
CASSETTE PLAYER OPERATION
LOADING A CASSETTE
TAPE
Note: Take up any slack in the tape
by turning the cassette’s hub with a
pencil. If you do not remove excess
slack, the tape might become tangled
in the record/playback mechanism.
Avoid touching the tape.
3. Close the cover.
PLAYING A CASSETTE
TAPE
1. Set FUNCTION to TAPE.
1. Press STOP/EJECT
to open
the cassette compartment cover.
2. Load a cassette tape.
3. Press PLAY
. The POWER indi-
cator lights and the tape player
plays the cassette tape until it
reaches the end, then it automati-
cally stops.
2. Insert the cassette tape into the
tape guides on the compartment
door, with the side you want to
play facing you and the exposed
tape edge facing down.
Notes:
• To temporarily stop playback,
press PAUSE
. Press PAUSE
again to resume playback.
17
14-543.fm Page 18 Wednesday, June 30, 1999 3:52 PM
• To rapidly wind the tape forward
RECORDING ON A
CASSETTE TAPE
or backward, press FAST-F
or REWIND
. The cassette
deck automatically stops at the
end of the tape.
You can record from the CD player,
the radio, or an auxiliary audio source
to a cassette tape.
Notes:
• Before recording, be sure the
erase-protection tabs are in place
on the cassette tape you are
recording onto (see “Preventing
Accidental Erasure”).
• Be sure the cassette player is
stopped before fast-forwarding
or rewinding a cassette tape.
• Tape quality greatly affects the
quality of the recording. We rec-
ommend regular length (60- or 90-
minute) cassette tapes. We do not
recommend long-play cassette
tapes such as C-120s because
they are thin and easily tangle.
For low-noise, wide-range record-
ings, use normal-bias tape.
• Always remove and store cas-
sette tapes when you are not
using them.
4. Adjust VOLUME, TONE and BAL-
ANCE to the desired levels.
5. Press E-BASS to turn on the
extended bass system. Press the
button again to turn it off.
• The CD-3319’s Automatic Level
6. To manually stop play, press
Control
(ALC)
automatically
STOP/EJECT
indicator turns off. Press STOP/
EJECT again to open the cas-
. The POWER
adjusts the recording level. VOL-
UME, TONE and BALANCE have
no effect on recording.
sette compartment and remove
the tape.
Recording from a CD
1. Set FUNCTION to CD and load a
CD. The POWER indicator lights.
2. Insert a cassette tape.
18
14-543.fm Page 19 Wednesday, June 30, 1999 3:52 PM
3. If you are not starting from track 1,
select the desired track or pro-
gram a sequence (if you do not
want to record the entire CD),
then press PLAY/PAUSE
twice to pause the CD player.
appears.
5. Press RECORD to begin record-
ing.
You might hear a low-
Note:
volume tone from the CD-3319’s
speakers during playback after
you record an AM radio program.
To insure a tone-free recording,
make a test recording before you
record the desired program. If you
hear the tone in the test recording,
set MODE/BEAT-CUT on the back
of the CD player to whichever
position gives you the best
recorded sound.
4. Press RECORD
on the tape
deck. RECORD
and PLAY
lock down, the CD player auto-
matically begins playing the first
track, and the tape deck begins
recording from the CD.
and
SYNC
appear on the display.
If you use a cassette
6. To stop recording, press STOP/
Caution:
tape with the erase-protection
tabs removed, do not force down
RECORD . This can damage the
record mechanism. See “Prevent-
ing Accidental Erasure.”
EJECT
.
Recording from an Auxiliary
Audio Source
To temporarily stop record-
Note:
1. Set FUNCTION to AUX. The
ing, press PAUSE
.
Press
POWER indicator lights.
PAUSE
again to resume re-
2. Insert a cassette tape.
cording.
3. Connect an auxiliary audio source
and start playing the selection you
want to record.
5. To stop recording, press STOP/
EJECT . To stop the CD
player, press STOP/CLEAR
.
4. Press RECORD to begin record-
ing.
Recording from the Radio
5. To stop recording, press STOP/
1. Set FUNCTION to RADIO. The
EJECT
.
POWER indicator lights.
2. Insert a cassette tape.
3. Set BAND to FM or AM.
4. Adjust TUNING to the station you
want to record.
19
14-543.fm Page 20 Wednesday, June 30, 1999 3:52 PM
Erasing a Cassette Tape
TAPE CARE TIPS
If you no longer want a recording, you
can record over it or erase it.
Preventing Accidental
Erasure
To erase a previously recorded tape,
you can either:
Cassette tapes have two erase-
protection tabs — one for each side.
To protect a recording from being ac-
cidentally recorded over or erased,
use a screwdriver to remove one or
both of the cassette tape’s erase-pro-
tection tabs.
FUNC-
• Record silence by setting
TION
TAPE
CD
or (with no CD
to
RECORD
loaded) and press
the tape deck.
on
• Use a bulk tape eraser (such as
Radio Shack Cat. No. 44-232, not
supplied) available at your local
Radio Shack store.
Restoring Tape Tension and
Sound Quality
After you play a cassette tape several
times, the tape might become tightly
wound on the reels. This can cause
playback sound quality to deteriorate.
Notes:
• If you want to record over a tape
side after you have removed the
erase-protection tab, place
a
piece of strong plastic tape over
that side’s erase-protection hole.
To restore the sound quality, fast-
forward the tape from the beginning to
the end of one side, then completely
rewind it. Then loosen the tape reels
by gently tapping each side of the cas-
sette’s outer shell on a flat surface.
Caution: Be careful not to damage
the cassette when tapping it. Do not
touch the exposed tape or allow any
sharp objects near the cassette.
• Removing the erase-protection
tabs does not prevent a bulk
eraser from erasing a cassette
tape.
20
14-543.fm Page 21 Wednesday, June 30, 1999 3:52 PM
CARE AND MAINTENANCE
Your Radio Shack CD-3319 Portable Triple Play Compact Disc Player and AM/FM
Stereo Cassette Recorder is an example of superior design and craftsmanship.
The following suggestions will help you care for the CD-3319 so you can enjoy it for
years.
Keep the CD-3319 dry. If it gets wet, wipe it dry immediately. Water
contains minerals that can corrode electronic circuits.
Handle the CD-3319 carefully. Dropping it can damage the case and
circuit boards and cause the CD-3319 to work improperly.
Use the CD-3319 only in normal temperature environments. Temper-
ature extremes can shorten the life of electronic devices, damage
batteries, and warp or melt plastic parts.
Keep the CD-3319 away from dust and dirt, which can cause prema-
ture wear of parts.
Wipe the CD-3319 with a damp cloth occasionally to keep it looking
CLEANER
new. Do not use harsh chemicals, cleaning solvents, or strong deter-
gents to clean the CD-3319.
Use only fresh batteries of the required size and type. Always remove
old or weak batteries. They can leak chemicals that destroy electronic
circuits.
Modifying or tampering with the CD-3319’s internal components can cause a mal-
function and might invalidate its warranty and void your FCC authorization to oper-
ate it. If the CD-3319 is not performing as it should, take it to your local Radio
Shack store for assistance.
21
14-543.fm Page 22 Wednesday, June 30, 1999 3:52 PM
FCC INFORMATION
CLEANING THE TAPE-
HANDLING PARTS
This equipment complies with the lim-
its for a Class B digital device as spec-
ified in Part 15 of FCC Rules. These
limits provide reasonable protection
against radio and TV interference in a
residential area. However, your equip-
ment might cause TV or radio interfer-
ence even when it is operating
properly. To eliminate interference,
you can try one or more of the follow-
ing corrective measures:
Dirt, dust, or particles of the tape’s
coating can accumulate on the tape
heads and other parts that the tape
touches. This can greatly reduce the
performance of the CD-3319. Use the
following cleaning procedure after ev-
ery 20 hours of tape player operation.
1. Remove the batteries and discon-
nect any other power source.
2. Open the cassette compartment
door.
• Reorient or relocate the radio or
TV’s receiving antenna
PLAY
3. Press
on the tape deck
• Increase the distance between the
CD-3319 and the radio or TV
to expose the parts you need to
clean.
• Use outlets on different electrical
circuits for the CD-3319 and the
radio or TV
4. Use a cotton swab dipped in de-
natured alcohol or tape head
cleaning solution to clean the
record/play head, pinch roller,
capstan, tape guides, and erase
head.
Consult your local Radio Shack store
or an experienced radio/TV technician
if the problem still exists.
5. When you finish cleaning, press
STOP/EJECT
, close the cas-
sette compartment door, and
reconnect power.
Your local Radio Shack store sells a
complete line of cassette deck clean-
ing supplies.
22
14-543.fm Page 23 Wednesday, June 30, 1999 3:52 PM
SPECIFICATIONS
CASSETTE DECK
Tape Speed ........................................................................... 17/8 ips (4.75 cm/sec.)
Tape System ............................................................................ 4 Track/Side/Stereo
Signal to Noise Ratio .......................................................................................43 dB
Channel Separation .........................................................................................35 dB
Wow and Flutter ............................................................................................ 0.25%
CD PLAYER (Test Point at CD Output)
Type ......................................................................... CD Player with Optical Pickup
Channels ............................................................................. Two Channels (Stereo)
Frequency Response ..................................................................... 20 Hz to 20 kHz
Digital Filter ............................................................................ 8 times Oversampling
Signal to Noise Ratio .......................................................................................80 dB
RADIO
Frequency Range
FM ................................................................................................. 88–108 MHz
AM ............................................................................................. 530–1710 KHz
Antennas
FM ................................................................................................................Rod
AM ...................................................................................................Ferrite Core
Usable Sensitivity
FM (1 IHF Usable Sensitivity) ..................................................................6.2mV
AM (20 dB S/N Sensitivity) .................................................................630 mV/m
GENERAL
Output Power (10% THD) ........................................................ 4 Watts/Channel DC
Speakers
Woofer ................................................................................Dynamic, 4-Inch × 2
Tweeter ...................................................................................................... Piezo
23
14-543.fm Page 24 Wednesday, June 30, 1999 3:52 PM
Power Supply ........................................AC 120 V, 60 Hz/DC 13.5 V / 9 D Batteries
Dimensions (HWD) ....................................................... 107/16 × 217/8 × 91/2 inches
(265 × 555 × 240 mm)
Weight (without batteries) ....................................................................... 14 lbs 3 oz
6.44 Kg
Specifications are typical; individual units might vary. Specifications are subject to
change and improvement without notice.
Radio Shack Limited Warranty
This product is warranted against defects for 90 days from date of purchase from Radio
Shack company-owned stores and authorized Radio Shack franchisees and dealers.
Within this period, we will repair it without charge for parts and labor. Simply bring your
Radio Shack sales slip as proof of purchase date to any Radio Shack store. Warranty
does not cover transportation costs. Nor does it cover a product subjected to misuse or
accidental damage.
EXCEPT AS PROVIDED HEREIN, RADIOSHACK MAKES NO EXPRESS WARRAN-
TIES AND ANY IMPLIED WARRANTIES ARE LIMITED IN DURATION TO THE DURA-
TION OF THE WRITTEN LIMITED WARRANTIES CONTAINED HEREIN. Some states
do not permit limitation or exclusion of implied warranties; therefore, the aforesaid limi-
tation(s) or exclusion(s) may not apply to the purchaser.
This warranty gives you specific legal rights and you may also have other rights which vary from
state to state.
We Service What We Sell
10/95
RadioShack
A Division of Tandy Corporation
Fort Worth, Texas 76102
2A6
Printed in Indonesia
|