12-888
The clock is the default display. PM appears for
afternoon time.
You can power your radio with AC power or with
batteries. The attached AC power cord’s plug is
polarized and fits into AC power outlets only one
way. If the plug does not fit your outlet, turn the
plug over and try reinserting it. If it still does not
fit, contact a qualified electrician to change your
outlet, or use a different AC outlet.
Digital AM/FM/WX Radio
Thank you for purchasing your Digital
1. Hold down MEMORY SET until you hear a beep.
AM/FM/WX (Weather) Radio from RadioShack.
It provides excellent AM and FM radio reception
and local weather information. You can store up to
20 radio stations and access them with the touch
of a button.
The hour digits flash.
2. Rotate TUNER/SEEK to adjust the hour, and press
MEMORY SET to confirm. The minutes flash.
3. Rotate TUNER/SEEK to adjust the minutes, and
then press MEMORY SET to confirm. A beep
sounds to confirm the time is set.
1. Remove
the battery
STATION PRESETS — To hear a preset station, press the
STATION PRESET button corresponding to a frequency
saved in that location. Press the button twice to
access stations 6-10.
compartment
cover.
ꢀ
2. Extend the AC
power cord and
plug it into a
ꢁ
standard 120V
AC outlet. Or,
RADIO/CLOCK — Press to toggle
between radio and clock mode.
insert four size C batteries according to the
polarity markings in the compartment.
DYNAMIC BASS — Press to activate the dynamic bass
(DBS). DBS appears on the display when DBS is on.
3. Replace the cover.
WARNING: To reduce the risk of fire or shock hazard, do not
expose this product to rain or moisture.
VOLUME — Turn clockwise until it clicks to turn on the
radio. Then, rotate to your desired listening level.
RISK OF ELECTRIC
SHOCK. DO NOT OPEN.
!
TUNER/SEEK — Rotate to adjust the hour and minutes
in clock mode. Rotate to search for a radio station in
radio mode.
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO
NOT REMOVE COVER OR BACK. NO USER-SERVICEABLE
PARTS INSIDE. REFER SERVICING TO QUALIFIED
PERSONNEL.
This symbol is intended to alert you to the presence of
uninsulated dangerous voltage within the product’s enclosure
that might be of sufficient magnitude to constitute a risk of
electric shock. Do not open the product’s case.
MEMORY SET — Hold down to enter clock setting mode. Then, press to confirm your
hour and minutes settings. In radio mode, tune to the desired frequency, and then
hold down MEMORY SET to save the frequency in a desired location (1-10).
BAND — Press to listen to
AM, FM, or WX radio.
This symbol is intended to inform you that important
!
operating and maintenance instructions are included in the
literature accompanying this product.
Note: Actual product may vary
from the images found in this
document.
Please read this user’s guide before
radio
user’s guide
installing, setting up and using your new product
|