49-2533
4-channel surveillance
controller
You can power the controller using the supplied 15V, 850mA AC/DC adapter.
You can set the PIR mode, alarm, scan time, alarm time,
dwell time, remote learn, and clock’s date and time on
the menu using the TV/monitor’s display.
ꢀ
ꢀ
Always connect the adapter to your controller before you connect it to AC power. When you finish,
disconnect the adapter from AC power before you disconnect it from the controller.
Notes
Turn on the TV/monitor and set it to the video mode (or
the VCR’s RF output channel). Then, set the VCR to the
Audio/Video input mode.
The AUTO/MANUAL indicator lights when you power the controller. The unit automatically enters the auto-
scan mode and sounds two beeps after you complete the connection.
ꢁ Connect your cameras’ mini-DIN plugs into the mini-DIN sockets CAM1, CAM2, CAM3, and/or CAM4 on the back of the
ꢁ
Press and hold 6/AUTO/MANUAL/NEXT for about
two seconds. The controller beeps and the setup
menu appears on the TV/monitor’s display.
controller.
ꢂ Connect the yellow stereo phono plug at one end of the supplied 6-foot connector cable to the video input jack of your
ꢂ
Repeatedly press 6/AUTO/MANUAL/NEXT to
select the row you want to set.
VCR, and connect the white stereo phono plug of the cable to the audio input jack of your VCR.
ꢃ Connect the yellow stereo phono plug at the other end of the connector cable to VIDEO on the back of the controller,
ꢃ Repeatedly press 4/CAM/SELECT/SELECT to
and connect the white stereo phono plug to AUDIO on the back of the controller.
select one function of the row you want to set.
ꢄ
Repeatedly press /VCR/SET to set the function.
ꢄ
Plug the supplied IR cable to IR REM jack on the back of the controller and lead the IR cable to the front of the VCR at a
distance of 5 to 30 cm. Make sure the IR transmitter is directly pointing to the VCR’s sensor.
ꢅ Repeatedly press 6/AUTO/MANUAL/NEXT to
select Exit and press /VCR/SET to exit the menu
after you complete the setting.
Thank you for purchasing your 4-Channel Surveillance
Controller from RadioShack. Your controller lets you
use as many as four indoor/ourdoor security cameras, a
TV or monitor, and your VCR (none supplied) as a fully
functional surveillance system. It is designed to provide
black and white or color camera observation systems at
your home or workplace. And, you can even set up the
controller so the VCR records only when the cameras
detect motion using the PIR (passive infrared) feature.
ꢅ Connect the supplied 15V AC adapter into the DC 15V jack on the back of the controller.
ꢆ Then, connect it to a standard AC outlet.
You must use a Class 2 power source that supplies regulated 15V DC and delivers at least 850 mA. Its center
tip must be set to positive and its plug must fit the controller’s DC15V jack. The supplied adapter meets these
specifications. Using an adapter that does not meet these specifications could damage the controller or the
Caution
adapter.
Its features include:
ꢀ
4-Channel Input of Camera – lets you connect up to
4 cameras to the controller.
ꢀ
On-Screen Setup – lets you set the PIR, alarm, scan
time, alarm time, dwell time, remote learn, and
clock’s date and time on the menu using the TV/
monitor’s display.
ꢁ
Mini-DIN plugs
/VCR/SET
6/AUTO/
MANUAL/NEXT
ꢀ
ꢀ
Automatic VCR Record – automatically actives
when PIR has been triggered.
4/CAM/SELECT/
6-foot connector cable
SELECT
ꢂ
Intercom Function – enables 2-way communication
between cameras and your controller (through TV/
monitor speaker).
Turning the PIR Sensor On/Off
You can turn the PIR sensor on the camera on or off. If
you are going to use the system as surveillance only,
you might want to turn the PIR sensor function off.
PIR
ꢀ
ꢀ
Auto and Manual Scan Function – automatically
scans and displays each channel after you power
the controller each time, and you also can scan the
channels manually.
Repeatedly press NEXT to select PIR and press SELECT
to select ON or OFF. Then press SET to enter the setting
into the controller’s memory.
IR Cable
Inline Audio Buzzer Warning – activates the buzzer
when the unit is triggered if you set the alarm on.
ꢆ
Proceed to other menu setting, or repeatedly press
NEXT to select Exit and exit the menu mode.
Rear view of controller
NO/COM/NC
Turning the Alarm On/Off
ꢄ
IR REM
The controller's built-in alarm sounds when a camera’s
PIR sensor is triggered. You might want to turn the built-
in alarm off when you connect the other alarm device to
the controller.
DC 15V
ꢅ
4-Channel Controller
6-foot connector cable
IR (infrared) cable
15V AC adapter
VIDEO
Repeatedly press NEXT to select Alarm. Then, press
SET to enter the setting into the controller's memory.
Mini-DIN sockets for
ꢃ
AUDIO
cameras
Proceed to other menu setting, or repeatedly press
NEXT to select Exit and exit the menu mode.
Please read this user’s guide before
installing, setting up and using your new product
|