RL75e (VB2528WD-US)
Type of Appliance
• Temperature controlled, continuous flow, gas hot water system
• Certified for installation in manufactured (mobile) homes
• Forced combustion
• Energy Star qualified
Rinnai Model Number
REU-VB2528WD-US
Minimum/Maximum Gas Rate (Input)
9,900 - 180,000 BTU/h (Natural Gas)
10,300 - 180,000 BTU/h (Propane)
Electrical
Appliance:
Controller:
AC 120 Volts - 60 Hz
DC 12 Volts
Electrical Consumption
Ignition System
Normal: 44 w Standby: 2 w Anti-frost protection: 104 w
Direct electronic ignition
Minimum flow rate: 0.26 GPM
Minimum activation flow rate: 0.4 GPM
Maximum flow rate: 7.5 GPM
Hot Water Capacity
98° - 120° F (factory default) Maximum temperature is selectable at
120° F or at 140° F; 98° - 160° F available with the MCC-91
controller for commercial and hydronic applications
Temperature
120° F (factory default) or 140° F
Outdoor only
Temperature (without remote)
Installation
Natural Gas: 0.82
Propane: 0.82
Energy Factor
Gas supply: 3/4 inch MNPT
Cold water inlet: 3/4 inch MNPT
Service Connections
Hot water outlet: 3/4 inch MNPT
Isolation & Pressure Relief Valves Included Heavy duty forged brass Webstone Isolator valves EXP E2, certified
to NSF/ANSI 61-8 for potable water
Water flow sensor, electronic water control device and fixed by-pass
20 - 150 PSI (recommended 30-80 PSI for maximum performance)
Water Flow Control
Minimum/Maximum Water Supply Pressure
RL75e VB SP
1/2011
© 2011 Rinnai Corporation
|
Q Logic Network Router IB0056101 00 G02 User Guide
RCA Stereo System RS2663 User Guide
RIDGID Drill R8411503 User Guide
Royal Sovereign Air Conditioner ARP 1400BLS User Guide
Samsung Car Video System HTTHX22 User Guide
Samsung Computer Monitor 1100MB User Guide
Samsung Printer 500N User Guide
Sanyo Camcorder VPC TH1 User Guide
Sears Oven 36725 User Guide
Sennheiser Headphones 830 TV User Guide