USB 2.0 5-Port PCI Adapter RC101
User Manual
USB 2.0 5-Port PCI Adapter RC101
User Manual
search for a better driver (Recommended)”. Click Next to continue.
4.
If no USB 2.0 driver has been installed previously, then Windows will not be able to locate
the software for this device. Click Finish to exit “Add New Hardware Wizard”.
5.
Insert the driver CD into CD-ROM drive and select “F:\PCI_IO\U20\NEC”. Then run the
application U2v2_1.exe”.
6.
After run the application U2v2_1.exe, the USB 2.0 Driver Setup program will start and copy
2
USB 2.0 5-Port PCI Adapter RC101
User Manual
files.
7.
Click Close to exit the Setup program and restart your computer.
8.
If the drivers are installed successfully, you will see the following new devices in Device
Manager.
9.
If the drivers are installed successfully in Windows2000/XP, you will see the following new
3
USB 2.0 5-Port PCI Adapter RC101
User Manual
devices in Device Manager.
Windows 2000 & Windows XP
For USB 2.0 driver, please run D:\U2v2_1.EXE where D is CD-ROM drive in driver CD. Then follow
similar procedures as above to complete the driver installation.
Thank you for purchasing Rosewill Product.
support for your product.
4
|