Connecting to the RCA Input
Connection Panel(depending on the model)
COLOR TELEVISION
The RCA¨ and RCAˆ connectors are used for equipment,
such as a VCR, DVD, decoder, satellite receiver, video game
device, or video disc player. (When using the mono
equipment, connect to the AUDIO-L input connector.)
The RCA∏ connectors are used for equipment such as a
DVD with component output (480i only).
The actual configuration of your TV may be different,
depending on your model.
➢
Owner’s Instructions
Before operating, please read this manual thoroughly,
Rear Panel
and retain it for future reference.
Connecting to the RCA Output
Register your product at
RCA output is only available for AV&Cable output.
➢
Component cables are not available to use.
or
The RCAØ connectors are used for equipment, such as a
recording VCR or audio system.
cable television network
Front (or Side) Panel
Control Panel(depending on the model)
ΠAudio input
The actual configuration of your TV may be different,
depending on your model.
➢
´ Video input
Front (or Side) Panel
ˇ S-Video input
¨ Headphone jack
Whenever you connect an audio or video system to your
☛
television, ensure that all elements are switched off.
Please be sure to match the color coded input terminals
and cable jacks.
Please be sure to match the color coded input terminals
☛
and cable jacks.
Connecting to the RCA Input
Connecting to an Aerial or Cable Television Network
The Œ (AUDIO-L/R) and ´ (VIDEO) connectors are used
for equipment, such as a camcorder, video disc player, or
video game device.
ΠPower on/off
Connect the aerial or network input cable to the Œ (75 Ω
coaxial socket).
´ Remote control sensor
ˇ Standby indicator
¨ On-screen menu display
ˆ Volume adjustment
Ø Channel selection
To view television channels correctly, a signal must be
received by the set from one of the sources: an outdoor
aerial, cable television network, or satellite network.
If you are using an indoor aerial, you may need to adjust it
when tuning your television until you obtain a picture that is
both sharp and clear.
Connecting to the S-VIDEO Input
The ˇ (S-VIDEO) and Œ (AUDIO-L/R) connectors are used
for equipment with an S-Video output, such as a camcorder
or VCR.
◆ You can use the Ø buttons to switch the TV on when it is
in standby mode depending on the model.
◆ The ˆ and Ø buttons also have the same function as the
œ/√/†/… buttons on the remote control.
◆ If the remote control no longer works or you have
misplaced it, you can use the controls on the panel of the
television.
Connecting Headphones
Connecting to the SCART Input/Output
The ¨ (headphone) jack is used for watching a television
programme without disturbing the other people in the room.
Prolonged use of headphones at a high volume may damage
your hearing.
The SCART´ and SCARTˇ connectors are used for
equipment, such as a VCR, DVD, decoder, satellite receiver,
video game device, or video disc player.
The SCART´ is also used for equipment with an RGB
output, such as a video game device or video disc player.
When both the front (or side) AV and rear connectors
are connected to external equipment, the front (or
side) AV receives priority.
➢
continued...
AA68-03582C-02
English - 1
Check antenna input.
Enter Exit
Enjoy your watching
2
3
Select the appropriated
language by pressing the
… or † button. Press the
ENTER button.
9
When you have finished,
press the MENU button.
Viewing the Menus
The Enjoy your watchingis displayed, and then the
channel which has been stored will be activated.
1
Press the MENU button.
The main menu is displayed on the screen. Its left side
has five icons: Input, Picture, Sound, Channel, and
Setup.
The Check antenna input.is displayed.
Setup
TV
If any language is not selected, the language menu
will disappear about 30 seconds later.
Re-setting the Plug & Play
Method: MENU ➜ …/†
(Setup) ➜ ENTER ➜ …/†
(Plug & Play) ➜ ENTER
➢
Plug & Play
Language
√
: English
Time
√
√
√
√
√
2
3
4
Press the … or † button to select one of the icons.
Press the ENTER button to access the icon’s sub-menu.
Make sure that the antenna
is connected to the
television (refer to page 1).
Press the ENTER button.
The Auto Storemenu is
displayed with Area
selected.
Child Lock
Blue Screen
Melody
Auto Store
TV
: Off
: On
ASIA W/EUROPE
:
Area
Search
√
√
CIS E/EUROPE
CHINA
Demonstration
HONGKONG/UK
AUSTRALIA
NZ/INDONESIA
SOUTH AFRICA
AMERICA
Press the … or † button to move to items in the menu.
Press the ENTER button to enter items in the menu.
Move
Enter
Return
Move
Enter
Return
Press the …/†/œ/√ button to change the selected
items. Press the MENU button to return to the previous
menu.
4
5
Press the ENTER button again.
Press the … or † button to select your area. Press the
5
Press the EXIT button to exit from the menu.
ENTER button.
Search
6
To search the channels,
select Searchby pressing
the … or † button. Press
Start
Input (depending on the model)
-
Enter
Return
the ENTER button.
Source List / Edit Name
Search
7
Press the ENTER button
again to start search
channels. To stop the
search, press the ENTER
button.
P1
102MHz
Source List
7
%
TV
◆ Source List
Stop
TV
You can switch between
viewing signal from
AV1
----
Enter
Return
Time
AV2
S-Video
Component
----
----
----
Setup - Plug & Play (depending on the model)
connected equipment, such
as a VCR, DVD, set-top box,
and the TV source
TV
When the channel
--:--
Clock
am
When the television is initially powered on, several basic
customer settings proceed automatically and subsequently.
The following settings are available.
Sleep Timer
On Timer
:
Off
searching has finished, the
Timemenu is displayed
with Clockselected.
--:--
--:--
On Timer Volume
am Off
am Off
: 10
Move
Enter
Return
Off Timer
(broadcast or cable).
You can change the required external source simply
by pressing the VIDEO button on the remote
control. It might take a short period of time for
pictures to be switched. To return to the TV mode,
press the TV button on the remote control.
➢
8
Press the œ or √ button to
move to the hour or minute.
Plug & Play
1
If the television is in standby
mode, press the POWER
button on the remote
control.
The Plug & Playis
displayed. It flickers for a
little while, and then
Languagemenu is
displayed.
Move
Enter
Return
Language
English
Melayu
Indonesia
Set the hour or minute by pressing the … or † button.
◆ Edit Name
Edit Name
TV
continued...
----
You can give a name to the
external source.
AV1
:
VCR
√
√
√
√
AV2
:
:
:
DVD
Cable STB
S-Video
Component
Move
Enter
Sat. STB
AV Recv.
DVD Recv.
Game
Camcorder
DVD Combo
continued...
Move
Enter
Return
English - 3
Channel - Manual Store
Channel - Add/Delete (depending on the model)
Channel - Auto Store
Manual Store
: P 3
Add/Delete
TV
TV
You can store channels,
You can exclude channels you
have chosen from the channels
you scanned. When you scan
through the stored channels,
those you have chosen to skip
are not displayed. All of the
channels that you did not
You can scan for the frequency ranges available to you (and
availability depends on your country). Automatically allocated
programme numbers may not correspond to actual or
desired programme numbers. However you can sort
numbers manually and clear any channels you do not wish
to watch.
Programme
P 1 : Added
P 2 : Added
P 3 : Added
P 4 : Added
P 5 : Added
including those received via
cable networks. When storing
channels manually, you can
choose:
Color System : AUTO
Sound System : BG
√
√
Search
Channel
Store
: 46MHz
: C 1
:
?
-
Whether or not to store each
of the channels found
Move
Adjust
Return
Move
Enter
Return
-
The programme number of each stored channel which
you wish to identify
specifically choose to skip are displayed during scanning.
Auto Store
TV
Channels are sorted and stored
in the order which reflects their
position in the frequency range
(with lowest first and highest
last). The programme originally
selected is then displayed.
ASIA W/EUROPE
:
Area
√
√
CIS E/EUROPE
CHINA
Search
Select Addedor Deletedby pressing the ENTER button
repeatedly.
HONGKONG/UK
AUSTRALIA
NZ/INDONESIA
SOUTH AFRICA
AMERICA
◆ Programme (Programme number to be assigned to a
channel)
◆ Color System: AUTO/PAL/SECAM/NT4.43/NT3.58
◆ Sound System: BG/DK/I/M
◆ Search (When you do not know the channel numbers):
The tuner scans the frequency range until the first
channel or the channel that you selected is received on
the screen.
Move
Enter
Return
To stop the search before it
has finished, press the
MENU button.
➢
Search
P1
102MHz
7
%
When finished, the Sortmenu
is displayed. To sort the stored
channels into the desired
Stop
Enter
Return
◆ Channel (When you know the number of the channel to
be stored)
numerical order, refer to “Channel - Sort”. To exit without
You can also select the channel number directly by
sorting, press the EXIT button.
➢
pressing the numeric buttons (0~9).
◆ Store (When you store the channel and associated
programme number)
Channel - LNA (depending on the model)
If there is no sound or abnormal sound, re-select the
sound standard required.
➢
Channel
TV
This function is very useful in the
situation that the TV is used in
weak signal. LNAamplifies the
TV signal in the weak signal
area, but not noise.
Auto Store
Manual Store
Add/Delete
Sort
√
√
√
√
√
Channel mode
☛
Off
On
LNA
:
◆ P (Programme mode): When completing tuning, the
broadcasting stations in your area have been
assigned to position numbers from P00 to P99. You
can select a channel by entering the position number
in this mode.
Channel - Sort (depending on the model)
Move
Enter
Return
Sort
TV
This operation allows you to
change the programme numbers
of stored channels. This
operation may be necessary
after using auto store.
◆ LNA(Low Noise Amplifier) setting is to be made for
From
To
Store
: P 1
: P--
each channel.
:
?
◆ C (Real channel mode): You can select a channel by
entering the assigned number for each air
broadcasting station in this mode.
◆ S (Cable channel mode): You can select a channel by
entering the assigned number for each cable channel
in this mode.
◆
◆
If the picture is noisy with the LNAset to On, select Off.
Depending on areas, factory mode of LNAwill be set up
as Onor Off.
Move
Adjust
Return
◆ From: Channel number to
be changed.
◆ To: New channel number to be identified.
◆ Store: Confirmation the exchange of channel numbers.
English - 4
Setup -Time
Setup - Child Lock
Setup -
Language / Blue Screen /
Melody / Demonstration
Time
Child Lock
TV
TV
◆ Clock
This feature allows you to
prevent unauthorized users,
such as children, from watching
unsuitable programmes by
muting out video and audio.
Child Lock cannot be released
using front (or side) panel
--:--
Clock
am
Child Lock
Programme
Lock
: On
√
You can set the television
clock so that the current time
is displayed when pressing
the INFO button on the
remote control. You must
also set the time if you wish
Sleep Timer
On Timer
Off Timer
: Off
: P 1
--:--
--:--
On Timer Volume
am Off
am Off
:
?
Setup
TV
◆ Language
:
10
Plug & Play
Language
√
It is variable depending on
the model. When you start
using the television for the
first time, you must select the
language which will be used
for displaying menus and
indications.
: English
Time
√
√
√
√
√
Move
Enter
Return
Move
Enter
Return
Child Lock
Blue Screen
Melody
: Off
: On
to use the automatic on or off timers.
When pressing the button (On/Off) on the front
buttons. Only remote control can release the Child Lock
setting, so keep the remote control away from children.
Demonstration
➢
Move
Enter
Exit
(or side) of the television, the clock setting will be
reset.
◆ Child Lock: On/Off
If you want to unlock a channel, set to Off.
◆ Programme: Channel number to be locked.
◆ Sleep Timer
◆ Blue Screen
You can select a time period of between 30 and 180
minutes after which the television automatically switches
to standby mode.
◆ Lock: When press the ENTER button, the Lockedis
If no signal is being received or the signal is very weak, a
blue screen automatically replaces the noisy picture
background. If you wish to continue viewing the poor
picture, you must set the Blue Screento Off.
displayed.
You can select these options simply by pressing the
If any channel is locked, you can not enter the
➢
➢
SLEEP button on the remote control. If the sleep
timer is not yet set, Offis displayed. If it is already
set, the remaining time before which the television
switches to standby mode is displayed.
Channelmenu by using the control buttons on the
television, and the Not availableis displayed. You
can access by using the remote control only.
◆ Melody
You can hear melody sound when the television is
powered on or off.
◆ On Timer / Off Timer
◆ Demonstration
You can set the On/Off timers so that the television will
switch on or off automatically at the time you select.
To become familiar with the various menus provided by
the television, you can view the in built demonstration.
Each of the menu options is displayed in turn. To exit
from the demonstration, press the EXIT button.
You must set the clock first.
☛
◆ On Timer Volume
The preferred volume can be set for when the timer
automatically turns on the television.
Auto Power Off
☛
When you set the timer “On”, the TV will eventually turn
off, ifno controls are operated for 3 hours after the TV
was turned on by timer. This function is only available
in timer “On” mode and prevents overheating, which
may occur if a TV is on for too long.
English - 5
Picture (depending on the model)
Mode / Custom /
ColorTone / Size /
-
Sound (depending on the model)
Mode / Equalizer /
Auto Volume / Pseudo Stereo /
Turbo Sound
-
Digital NR / DNIe Jr /Tilt
Picture
: Dynamic
Sound
◆ Pseudo Stereo
TV
TV
◆ Mode: Dynamic/
◆ Mode: Standard/Music
Mode
Mode
: Custom
This feature converts a monaural sound signal into two
identical left and right channels. Once the Pseudo
Stereois set to Onor Off, these settings apply to the
sound effects such as Standard, Music, Movie, and
Speech.
√
√
√
√
√
√
√
√
√
√
√
Standard/Movie/Custom
/Movie/Speech/Custom
Custom
Equalizer
You can select the type of
picture which best
corresponds to your viewing
requirements.
You can select the type of
Color Tone
Size
Digital NR
DNIe Jr
: Normal
: Normal
: Off
Auto Volume
: Off
Pseudo Stereo : Off
special sound effect to be
used when watching a given
broadcast.
Turbo Sound
: Off
: On
Move
Enter
Exit
Move
Enter
Exit
You can select these
You can select these
➢
➢
◆ Turbo Sound : Off/Plus/Voice
This feature suitably emphasizes both higher and
lower bands of sound (and includes other effects).
You can enjoy more magnificent and dynamic
sound when watching music, movie or other
channels.
options simply by pressing the P.MODE button on
options simply by pressing the S.MODE button on
the remote control.
the remote control.
◆ Custom: Contrast/Brightness/Sharpness/
Color/Tint(NTSC only)
◆ Equalizer
The television has several settings which allow you to
control the sound quality.
The television has several settings which allow you to
control the picture quality.
You can change the options simply by pressing the
TURBO button on the remote control.
If you make any changes to these settings, the
sound mode is automatically switched to Custom.
➢
➢
If you make any changes to these settings, the
picture mode is automatically switched to Custom.
➢
◆ Auto Volume
◆ Color Tone: Cool2/Cool1/Normal/Warm1/
Each broadcasting station has its own signal conditions,
and so it is not easy to adjust the volume every time the
channel is changed. This feature lets you automatically
adjust the volume of the desired channel by lowering the
sound output when the modulation signal is high or by
raising the sound output when the modulation signal is
low.
Warm2
◆ Size
You can select the picture size which best corresponds to
your viewing requirements. It is variable depending on
the model.
You can change the picture size simply by pressing
the P.SIZE button on the remote control.
➢
continued...
◆ Digital NR
If the signal received by the television is weak, you can
activate this feature to reduce any static and ghosting
that may appear on the screen.
◆ DNIe Jr (Digital Natural Image engine Junior)
This feature bring you more detailed image with detail
enhancement, contrast enhancement and white
enhancement. New image compensation algorithm gives
brighter, clearer, much detailed image to you. DNIe Jr
technology will fit every signals into your eyes.
English - 6
Teletext Feature(depending on the model)
Troubleshooting
Most television stations provide written information services
via teletext. The index page of the teletext service gives you
information on how to use the service. In addition, you can
select various options to suit your requirements by using the
remote control buttons.
3
4
Before contacting the Samsung after-sales service, perform
the following simple checks. If you cannot solve the problem
using the instructions below, note the model and serial
number of the television and contact your local dealer.
(sub-page)
Used to display the available sub-page.
(teletext on/mix)
Press to activate teletext mode after selecting the
channel providing the teletext service. Press it again to
overlap the teletext with the current broadcasting screen.
No sound or picture
◆ Check that the mains lead has been connected to a
wall socket.
For teletext information to be displayed correctly,
☛
channel reception must be stable. Otherwise,
information may be missing or some pages may not be
displayed.
5 Coloured buttons (red/green/yellow/blue)
If the FASTEXT system is used by a broadcasting
company, the different topics covered on a teletext page
are color-coded and can be selected by pressing the
coloured buttons. Press one of them corresponding to the
required. The page is displayed with other coloured
information that can be selected in the same way. To
display the previous or next page, press the
◆ Check that you have pressed the
button (On/Off)
and the POWER button.
◆ Check the picture contrast and brightness settings.
◆ Check the volume.
Normal picture but no sound
◆ Check the volume.
◆ Check whether the volume MUTE button on the
remote control has been pressed.
corresponding coloured button.
6
7
(page up)
No picture or black and white picture
◆ Adjust the color settings.
◆ Check that the broadcast system selected is correct.
Used to display the next teletext page.
(mode)
Press to select the teletext mode (LIST/FLOF). If you
press it in the LIST mode, it switches into the List save
mode. In the List save mode, you can save teletext page
Sound and picture interference
◆ Try to identify the electrical appliance that is affecting
the television, then move it further away.
into list using the
(store) button.
◆ Plug the television into a different mains socket.
8
9
(page down)
Used to display the previous teletext page.
Blurred or snowy picture, distorted sound
◆ Check the direction, location and connections of your
aerial.
(reveal)
Used to display the hidden text (answers to quiz games,
for example). To display normal screen, press it again.
This interference often occurs due to the use of an
indoor aerial.
0
!
(size)
Remote control malfunctions
Press to display the double-size letters in the upper half
of the screen. For lower half of the screen, press it again.
To display normal screen, press it once again.
◆ Replace the remote control batteries.
◆ Clean the upper edge of the remote control
(transmission window).
1
2
(hold)
Used to hold the display on a given page if the selected
page is linked with several secondary pages which follow
on automatically. To resume, press it again.
(store)
◆ Check that the “+” and “-” ends of the batteries are
Used to store the teletext pages.
inserted correctly.
(index)
◆ Check that the batteries are drained.
Used to display the index (contents) page at any time
while you are viewing teletext.
English - 7
OSD Map
Important Warranty Information
RegardingTelevision Format Viewing
✽ : It is variable depending on the model.
Input✽
-
-
Source List
Edit Name
-
VCR / DVD / Cable STB / Sat. STB / AV Recv. / DVD Recv. / Game /
Standard screen format televisions (4:3, the aspect ratio of
the screen width to height) are primarily designed to view
standard format full-motion video. The images displayed on
them should primarily be in the standard 4:3 ratio format and
constantly moving. Displaying stationary graphics and
images on screen, such as the dark top and bottom letterbox
bars (wide screen pictures), should be limited to no more
than 15% of the total television viewing per week.
Camcorder / DVD Combo
Picture
✽
-
-
-
-
-
-
Mode
-
-
-
Dynamic / Standard / Movie / Custom
Custom
Color Tone
Size
Contrast / Brightness / Sharpness / Colour / Tint (NTSC only)
Cool2 / Cool1 / Normal / Warm1 / Warm2
Digital NR
DNIe Jr
-
-
Off / On
Off / On
Wide screen format televisions (16:9, the aspect ratio of the
screen width to height) are primarily designed to view wide
screen format full-motion video. The images displayed on
them should primarily be in the wide screen 16:9 ratio
format, or expanded to fill the screen if your model offers this
feature, and constantly moving. Displaying stationary
graphics and images on screen, such as the dark side-bars
on non-expanded standard format television video and
programming, should be limited to no more than 15% of the
total television viewing per week.
Sound
✽
-
-
-
-
-
Mode
-
Standard / Music / Movie / Speech / Custom
Equalizer
Auto Volume
Pseudo Stereo
Turbo Sound
-
-
-
Off / On
Off / On
Off / Plus / Voice
Channel
-
Auto Store
-
Area
✽
-
ASIA/W.EUROPE / CIS/E.EUROPE / CHINA /
HONGKONG/UK /AUSTRALIA / NZ/INDONESIA /
SOUTH AFRICA / AMERICA
-
-
-
-
-
-
-
Search
-
Manual Store
Programme
Color System
Sound System
Search
Additionally, viewing other stationary images and text such
as stock market reports, video game displays, station logos,
web sites or computer graphics and patterns, should be
limited as described above for all televisions. Displaying any
stationary images that exceed the above guidelines can
cause uneven aging of picture tubes (CRTs) that leave
subtle, but permanent burned-in ghost images in the
television picture. To avoid this, vary the programming and
images, and primarily display full screen moving images, not
stationary patterns or dark bars. On television models that
offer picture sizing features, use these controls to view the
different formats as a full screen picture.
✽
✽
-
-
AUTO / PAL / SECAM / NT4.43 / NT3.58
BG / DK / I / M
Channel
Store
-
-
-
Add/Delete
Sort
LNA
✽
✽
✽
-
Off / On
Setup
-
-
-
Plug & Play
Language
Time
✽
✽
-
-
-
-
-
-
-
-
Clock
Be careful in the selection and duration of television formats
used for viewing. Uneven CRT aging as a result of format
selection and use, as well as other burned-in images, is not
covered by your Samsung limited warranty.
Sleep Timer
On Timer
Off Timer
On Timer Volume
Off / On
Off / On
Off / On
-
-
-
-
Child Lock
Blue Screen
Melody
Demonstration
English - 8
|