Connecting an audio device (Home Theater, etc.)
Quick Setup Guide
Step 4: Connect External Devices
Congratulations on the purchase of your new Samsung TV.
Read this setup guide to get your TV up and running quickly.
Connect your TV to your Home Theater or other
audio device to enjoy enhanced Sound quality.
Analog Audio connection
Connecting an AV device (DVD/Blu-ray player, cable/satellite box, etc.)
Using an Audio Cable
1-800-SAMSUNG (1-800-726-7864)
Use one of the connections below to connect your TV to an external A/V device. We recommend using HDMI for the highest picture quality.
STOP
Samsung Electronics America, Inc.
85 Challenger Road Ridgefield Park, NJ 07660-2112
Samsung Electronics Canada Inc.
55 Standish Court Mississauga, Ontario L5R 4B2
Call Center hours of operation: Mon-Sun, 9:00 AM -12
AM EST.
Amplifier / DVD home theater
AUDIO IN
Please do not return this unit.
Best Connection
If you have problems operating your
TV, call:
Audio (Not Supplied)
HD connection (up to 1080p)
1-800-SAMSUNG (1-800-726-7864)
For web support please visit:
register.
Digital Audio connection
Using an HDMI Cable
Using an Optical Cable
DVD, Blu-ray player, HD cable box, HD STB (Set-Top-Box)
satellite receiver
HDMI Cable (Not Supplied)
Digital Audio System
HDMI OUT
DVD
Optical Cable (Not Supplied)
OPTICAL
Step 1: Install the Stand
Very Good Connection
HD connection (up to 1080p)
Follow the steps below to connect the TV to the stand.
HDMI to DVI Cable (Not Supplied)
Connecting a PC
✎
NOTE
Using an HDMI to DVI Cable
Make sure to distinguish between the front and back of the Stand and
Guide Stand when assembling them.
x
HD connection
Connect your TV to a PC to use it as
a Monitor.
Using an HDMI to DVI Cable
Device
AUDIO OUT
DVI OUT
Make sure that at least two persons lift and move the LCD TV.
x
x
Audio (Not Supplied)
AUDIO OUT
Stand the product up to fasten the screws. If you fasten the screws with
the LCD TV placed down, it may lean to one side.
HDMI to DVI Cable (Not Supplied)
Audio Cable (Not Supplied)
DVI OUT
Good Connection
Video Cable (Not Supplied)
Top view
Component connection (up to 1080p)
Audio Cable
(Not Supplied)
Screws (M4 X L12)
Component Cable (Not Supplied)
Using a Component Cable
DVD, Blu-ray player, cable box, STB satellite receiver, VCR
Blu-ray player
Guide Stand
Stand
Lowest Quality Connection
Front
Audio/Video connection (480i only)
1
2
Connect the Guide Stand to the
Stand using five screws (M4 X L12)
as shown.
Audio Cable (Not Supplied)
COMPONENT OUT
AUDIO OUT
Using an D-Sub Cable
Using an Audio/Video Cable
PC OUT
Rear
DVD, Blu-ray player, cable box, STB satellite receiver, VCR
VCR
D-Sub Cable (Not Supplied)
Audio Cable (Not Supplied)
Rear
VIDEO OUT
AUDIO OUT
AUDIO OUT
✎
When connecting to AV IN 1 on the back of your TV, attach the video cable (yellow) to the green jack next to the
AV IN 1 label. The jack will not match the color of the video cable (yellow).
With your TV upright, connect the
TV to the Stand.
3
Fasten two screws (M4 X L12) at
position 1, and then fasten the
two screws (M4 X L12) at position
2.
Changing the Picture Mode
Step 5: Run Plug & Play
6
Select the Daylight savings time setting: Off or On, and then press the
ENTER button.
E
Your TV has four preset Picture Modes with factory adjusted settings, each
designed to give you an excellent picture under specific conditions.
The Picture Modes are listed and described in the table below:
When you turn on your TV for the first time, it automatically launches the Plug &
Play function. With Plug & Play, you can select the On Screen Display language, set
the clock mode, and launch the TV’s channel memorizing process.
2
1
7
8
Select the time zone in which you live, and then press the ENTER
E
button.
It also displays connection instructions similar to those in this guide.
To navigate while Plug & Play is running, press the Up, Down, Left or Right arrow
buttons on your remote. To make a selection, press the ENTER
To skip a screen, press the MENU button. To turn on your TV, press the POWER
Mode
Description
After the time zone screen, The connection method for best HD screen
quality is displayed. Press the Right arrow button on your remote to view
each screen in succession. Press the Blue button to skip this section.
Rear
Dynamic
Brightens picture. For a vibrant, enhanced image in brightly lit or
sunny room.
E
button.
Standard
Natural
For a bright, detailed picture in a normally lit room.
button on the remote or on the TV. To run Plug & Play, follow these steps:
9
The Enjoy your TV. screen appears. Then press the ENTER
E
button.
For a comfortable, easy-on-the-eyes picture in a normally lit room.
For a studio quality cinema picture in a dimly lit or dark room.
Step 2: Install the Batteries into the Remote
Movie
1
2
3
Using your remote control,
select the language for the On
Screen Display (OSD), and then
Plug & Play
Changing the Screen Size
To install batteries into your remote
control, follow these steps:
Select Language of the OSD.
English
Español
Français
To change the Picture Mode, follow these steps:
Your TV has several screen size options, each designed to work best with specific
types of video input. If you have a cable box or satellite receiver, it may have its own
set of screen sizes as well.
To change the screen size, press the P.SIZE button on your remote. The first time
you press it, your TV displays the current setting. Thereafter, each time you press
the P.SIZE button, you change the size of the picture on the screen.
1. Lift the cover on the back of the
remote upward as shown in the figure
to the right.
Menu Language
:
press the ENTER
E
button.
1. Turn on your TV, press the TOOLS button on your remote.
The Tools menu appears.
Select Home Use, and then
press the ENTER button.
U
Move
E
Enter
2. Using the ▲ or ▼ on your remote, select Picture Mode.
E
2. Install two AAA batteries.
If you select Store Demo, the TV will reset your picture and audio settings
every 30 minutes.
3. On the Picture Mode menu, use the ◄ or ► button on your remote to select
✎
Make sure to match the + and -
ends of the batteries to the diagram in the battery compartment.
the Picture Mode you want.
The following sizes are available:
4. Press the EXIT button to exit the menu.
3. Replace the cover.
Select Antenna Source and Channel Source. If Antenna Source is
Cable or Auto, you must select Channel Source to same type as your
cable system type. After selecting source, select Search; then press the
Setting the Clock
ENTER
E
button on your remote.
Before you can use your TV’s On/Off Timer, you must set the clock. To set the
clock, follow these steps:
1. Turn on your TV, press the MENU button on your remote, then select Setup →
Step 3: Connect Power and Antenna or Cable
✎
Most cable systems are Standard (STD) systems, If you are not sure
about what kind of cable system you have, contact your cable company.
16:9 Widescreen
4:3 Standard screen
Wide Fit
VHF/UHF Antenna
✎
If your TV is attached to a cable or satellite box, skip Steps 3 through 5.
After Plug & Play is complete, set your TV to Channel 3 or 4, according
to the directions for your cable or satellite box.
Time.
2. Select Clock Mode, and then press the ENTER
E
button.
Connect Ant In to
Antenna Cable (Not Supplied)
or
3. Choose Auto or Manual.
•
•
•
Wall cable jack
Zoom 1
Zoom 2
Screen Fit
VHF/UHF Antenna
Cable or Satellite box
Ant or Cable Out
If you select Auto, the current time will be set automatically using the time
from a digital channel.
4
5
The TV memorizes the available channels. This process can take up to 45
minutes.
x
x
✎
Screen Fit: Displays the full image without any cut-off when HDMI (720p /
1080i / 1080p) or Component (1080i / 1080p) signals are inputted.
Use a 75 ohm (round) cable.
If you select Manual, you can set the Month, Day, Year, Hour, Minute
and am/pm directly by pressing up, down, left and right arrow button on
your remote.
After the TV has memorized the channels, choose the Clock Mode. Select
Auto if you have a digital channel in your area. Select Manual if you don’t, or
Make sure the AC power cord is plugged in securely to
the wall outlet and the TV.
if you have a cable or satellite box. When done, press the ENTER
E
button.
4. Press the RETURN button on your remote when done.
✎
If you select Manual, the clock setting screen appears.
|