Model T438
Dual Alarm Clock Radio
For additional information, online registration,
and exclusive special offers visit our website:
For questions or comments regarding this or other products,
please call our toll-free number 1-800-888-4491.
Para instruccionese en Espanol, llame al 1-800-888-4491.
A Consumer Guide to Product Safety
When used in the directed manner, this unit has been designed and manufactured to ensure your personal safety. However, improper use can result in
potential electrical shock or fire hazards. Please read all safety and operating instructions carefully before installation and use, and keep these instructions
handy for future reference. Take special note of all warnings listed in these instructions and on the unit.
1. Water and Moisture – The unit should not be used near water. For example: near a bathtub, washbowl, kitchen sink, laundry tub, swimming pool
or in a wet basement.
2. Ventilation – The unit should be situated so that its location or position does not interfere with its proper ventilation. For example, it should not be
situated on a bed, sofa, rug or similar surface that may block ventilation openings. Also, it should not be placed in a built-in installation, such as a
bookcase or cabinet, that may impede the flow of air through the ventilation openings.
3. Heat – The unit should be situated away from heat sources such as radiators, heat registers, stoves or other appliances (including amplifiers) that
produce heat.
4. Power Sources – The unit should be connected to a power supply only of the type described in the operating instructions or as marked on the
appliance itself.
5. Grounding or Polarization – This product is equipped with a polarized alternating-current line plug (a plug having one blade wider than the other).
As a safety feature this plug will fit into the power outlet only one way. If you are unable to fit the plug into the outlet, try reversing the plug. If the
plug still fails to fit, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of your polarized plug by forcing the
plug into the outlet.
6. Power-Cord Protection – Power supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or
against them. It is always best to have a clear area from where the cord exits the unit to where it is plugged into an AC outlet.
7. Cleaning – The unit should be cleaned only as recommended. See the Maintenance section of this manual for cleaning instructions.
8. Objects and Liquid Entry – Care should be taken so that objects do not fall and liquids are not spilled into any openings or vents located on the
product.
9. Attachments – Do not use attachments not recommended by the product manufacturer.
10. Lightning and Power Surge Protection – Unplug the unit from the wall outlet during a lightning storm or when it is left unattended and
unused for long periods of time. This will prevent damage to the product due to lightning and power-line surges.
11. Overloading – Do not overload wall outlets, extension cords, or integral convenience receptacles as this can result in fire or electric shock.
12. Damage Requiring Service – The unit should be serviced by qualified service personnel when:
A. the power supply cord or plug has been damaged.
B. objects have fallen into or liquid has been spilled into the enclosure.
C. the unit has been exposed to rain.
D. the unit has been dropped or the enclosure damaged.
E. the unit exhibits a marked change in performance or does not operate normally.
13. Antenna – Do not connect an external antenna to the unit.
14. Periods of Nonuse – If the unit is to be left unused for an extended period of time, such as a month or longer, the power cord should be unplugged
from the unit to prevent damage or corrosion.
15. Servicing – The user should not attempt to service the unit beyond those methods described in the user’s operating instructions. Service methods
not covered in the operating instructions should be referred to qualified service personnel.
3
Installation and Maintenance
Installation
1. Remove the unit and all packing materials from the carton. You should save packing materials in case unit
needs to be returned for service. If you do not wish to save the materials, please dispose of them properly.
2. Place the unit on a stable, level surface, close to an AC outlet, out of direct sunlight, and away from sources
of dust, dirt, heat, water, moisture, vibration, and strong magnetic fields.
3. After installing the batteries (see below) and reading the Maintenance notes, plug the AC cord into an outlet.
“Sure Alarm” Battery Backup Installation
It is recommended that 3 “AA” batteries be installed into the unit, as directed below, to activate the “Sure Alarm”
battery backup feature. In the event that the AC power cord is disconnected or a power failure or other interruption
occurs, the “Sure Alarm” system will maintain clock and alarm settings for the life of the batteries, ensuring that
the alarm will sound at the set time (note: while operating on battery power, all set alarms will sound as a buzzer).
When power is restored, the clock will cease using battery power, and will again operate on AC power. The
Battery Low Indicator shows if there is enough battery power to run the backup.
1. Gently turn the unit over and remove the battery compartment door.
2. Install 3 "AA" batteries (alkaline batteries are recommended for longer life) into
the battery compartment, making sure that the + and – polarities match up
with those inside the compartment.
3. Slide the battery compartment door back on, making sure the door locks into
place, and gently return the unit to its upright position.
Battery Compartment
Maintenance
1. Place the unit on a level surface away from direct sunlight or sources of excessive heat.
2. Protect your furniture when placing the unit on natural wood or wood with a lacquered or coated finish. A
cloth or other protective material should be placed between the unit and the furniture.
3. Clean the casing with a soft cloth moistened only with mild soap and water. Stronger cleaning agents, such
as thinner or similar agents, are not recommended, as they may damage the surface of the case.
4. If the unit is not to be used for a prolonged period, such as a month or longer, remove the batteries to prevent
possible corrosion. Should the battery compartment become corroded or dirty, clean the compartment
thoroughly and replace the batteries.
4
Controls and Buttons
multi-directional
SOUNDCHAMBER
Off/Reset Button ³
SLEEP
VOLUME
ꢁ Sleep Volume Button
OFF/ALARM RESET
RADIO ON/SLEEP
Snooze/Dimmer Bar ·
ꢀ Radio On/Sleep Button
SNOOZE/DIMMER
Radio Alarm Button ´
Time Set Button ¶
Date Set Button ¾
Reverse << Button ¸
ꢂ Buzzer Alarm Button
ꢃ Alarm Set Button
ꢄ 7-5-2 Button
1
2
BUZZER
RADIO
TUE
M
D
ALARM SET
7•5•2
TIME SET
DATE SET
RADIO
> >
>>
AM 54 60 70
FM 88 92 96
80 100 140 170 x10kHz
100
104
108
MHz
ꢅ Forward >> Button
Radio Tuning Thumbwheel Ƹ
ꢆ Radio Band Switch
FUNCTION
AM • FM
VOLUME
TUNING
Volume Thumbwheel ƹ
5
LCD Display With Indicators
Radio Power Indicator
Battery Low Indicator
Buzzer Alarm Indicator
Radio Alarm Indicator
Daylight Savings
Time Indicator
POWER
PM
RADIO
BUZZER DST
PM Indicator
Sleep Volume
SLEEP
Clock
Indicator
M
D
Calendar/
Sleep Timer
SUN MON TUE WED THU FRI SAT
Calendar Day/
7-5-2 Alarm Settings
6
Setting the Clock and Calendar
Setting the Clock
1. Press and hold the ¶ Time Set Button until the display begins flashing.
2. Press the ¸ Reverse << or ꢅ Forward >> Button to set the time. Holding a button for a few seconds
will advance or reverse the time rapidly. Set the correct AM/PM time, shown by the display’s PM Indicator.
3. After setting the time, press the ¶ Time Set Button again or wait about ten seconds for the unit to beep
twice and the display to return to the normal display mode.
Setting the Calendar
1. It is important to set the correct date in order to use the 7-5-2 Alarm settings. Press and hold the ¾ Date
Set Button until the display begins flashing and the last two digits of the year replace the time in the display.
2. The date, month, and year are each set using a different button. To set the date, press the ¸ Reverse <<
Button. To set the month, press the ꢅ Forward >> Button. To set the year, press the ꢄ 7-5-2 Button.
(These buttons will only advance the date forward.) The clock features a 99-year calendar that automatically
programs the correct day of the week for the date set.
3. After setting the calendar, press the ¾ Date Set Button or wait about ten seconds to return to the
normal display mode.
Adjusting the Display Backlight
• This alarm clock radio features an adjustable display backlight, with dim, medium, and bright settings. To
select a backlight setting, press the · Snooze/Dimmer Bar until the desired brightness is reached.
7
Listening and Sleeping to the Radio
Listening to the Radio
ꢀ
1. Press the
Radio On/Sleep Button once to turn the radio on. The Radio Power Indicator will appear
at the top of the display.
ꢀ
Note: If the
Radio On/Sleep Button is pressed more than once, the unit will enter the sleep sounds mode.
See the Sleeping to the Radio with Timer section for more information about this feature.
2. Slide the ꢆ Radio Band Switch to AM or FM.
3. Rotate the Ƹ Radio Tuning Thumbwheel to select a radio station.
4. Rotate the ƹ Volume Thumbwheel to adjust the volume level.
ᕢ
5. Press the
Off/Reset Button to turn the radio off.
Antenna Information and Adjustment
FM – Extend the FM wire antenna to its full length and vary the direction to its strongest signal.
AM – The AM bar antenna is located inside the cabinet. Rotate the unit until you find the strongest AM signal.
Sleeping to the Radio with Timer
1 . Follow the above instructions to select a radio station.
ꢀ
2 . Press the
Radio On/Sleep Button twice to enter the sleep mode.
ꢀ
3 . Continue pressing the
Radio On/Sleep Button to select a 90-, 60-, 30-, or 15-minute sleep time.
The Sleep Timer appears in the bottom-left corner of the display.
4 . The Sleep Volume Indicator will appear, showing that the timer has been activated. Press the ꢁ Sleep
Volume Button to adjust the sleep volume to a comfortable level. This will not affect the alarm volume.
Turning the ƹ Volume Thumbwheel also adjusts the sleep volume, though this affects the alarm volume.
5 . The radio will play for the programmed sleep time and then shut off. To turn off the radio before the sleep
³
time has elapsed, press the
Off/Reset Button.
8
Operating the Alarms
Setting the AM/FM Radio Alarm
ꢃ
1. Press the
Alarm Set Button once to set the radio alarm. The display will show the radio alarm settings.
2. Press the ¸ Reverse << or ꢅ Forward >> Button to set the radio alarm. Holding a button for a few seconds
will advance or reverse the alarm time rapidly. Set the correct AM/PM time, shown by the PM Indicator.
3. See the Listening to the Radio section of this manual for instructions on selecting a radio station and volume.
4. After setting the wake time and sound, you will need to select your 7-5-2 setting. The 7-5-2 setting lets you
set the alarm for a full week, Monday through Friday, or the weekend. Before setting the alarm, be sure that
you have set the date, as shown in the Setting the Clock and Calendar section. While the display is still
flashing, press the ꢂ Date Set/7-5-2 Button until the desired days are shown at the bottom of the display.
ꢃ
5. After programming the radio alarm, press the
Alarm Set Button again to program the buzzer alarm, or
´
wait to return to the clock display. When the clock display appears, press the
Radio Alarm Button to
activate the radio alarm. The Radio Alarm Indicator will appear, showing that the radio alarm is set.
Setting the Buzzer Alarm
ꢃ
1. Press the
Alarm Set Button until the display shows the buzzer alarm settings.
2. Press the ꢄ Reverse or ƹ Forward Button to set the buzzer alarm time.
3. See Step #4 in the above section for instructions on setting the buzzer alarm’s 7-5-2 Advance Alarm.
ꢃ
4. After programming the buzzer alarm, press the
Alarm Set Button again or wait ten seconds to return
ꢂ
to the clock display. When the clock display appears, press the
Buzzer Alarm Button to activate the
buzzer alarm. The Buzzer Alarm Indicator will appear, showing that the buzzer alarm is set.
Checking Your Alarm Time Settings
To check either alarm setting, press its Alarm Button twice to show the settings for a few seconds. After you
have checked the setting, be sure that the Alarm Indicator still appears on the display.
Turning Off the Alarms
³
1. After the alarm sounds, press the
Off/Reset Button to turn off the alarm while still maintaining the
programmed 7-5-2 Advance Alarm settings. To turn off an alarm and cancel its 7-5-2 settings, press its
Alarm Button so that its Alarm Indicator no longer appears on the display.
³
2. If the
Off/Reset Button is not pressed, the alarm will sound for an hour before stopping. As long as an
indicator appears on the display, the alarm will sound according to the 7-5-2 Advance Alarm settings.
3. To use the snooze feature, press the · Snooze/Dimmer Bar when the alarm sounds. The alarm will stop
for about nine minutes before sounding again. This can be repeated during the one-hour snooze cycle.
9
Limited 90-Day Warranty Information
Timex Audio Products, a division of SDI Technologies Inc. (hereafter referred to as SDI Technologies), warrants this product
to be free from defects in workmanship and materials, under normal use and conditions, for a period of 90 days from the date
of original purchase.
Should this product fail to function in a satisfactory manner, it is best to first return it to the store where it was originally purchased.
Should this fail to resolve the matter and service still be required by reason of any defect or malfunction during the warranty period,
SDI Technologies will repair or, at its discretion, replace this product without charge (except for a $5.00 charge for handling,
packing, return UPS/postage, and insurance). This decision is subject to verification of the defect or malfunction upon delivery
of this product to the Factory Service Center listed below. The product must include proof of purchase, including date of
purchase. The fee for service after the warranty period or without proof of purchase is $10.00.
Before returning this product for service, please first replace the batteries (if applicable) with fresh ones, as exhausted or
defective batteries are the most common cause of problems encountered.
If service is still required:
1. Remove the batteries (if applicable) and pack the unit in a well padded, heavy corrugated box.
2. Enclose a photocopy of your sales receipt, credit card statement, or other proof of the date of purchase, if within the
warranty period.
3. Enclose a check or money order payable to the order of SDI Technologies, for the sum of $5.00 ($10.00 after warranty period).
4. Send the unit prepaid and insured, to the Factory Service Center listed below.
Consumer Repair Department
SDI Technologies Inc.
Timex Audio Products Division
1401 Pullman Drive, Suite A
El Paso, TX 79936-7726
NOTE: This warranty is valid only if the product is used for the purpose for which it was designed. It does not cover (i) products
which have been damaged by negligence, misuse or accident, or which have been modified or repaired by unauthorized
persons; (ii) cracked or broken cabinets, or units damaged by excessive heat; (iii) damage to CD’s or tape cassettes (if
applicable); (iv) the cost of shipping this product to the Factory Service Center and its return to the owner.
This warranty is valid only in the United States of America and does not extend to owners of the product subsequent to the
original purchaser. Any applicable implied warranties are also limited to 90 days, and SDI Technologies will not be liable for
consequential damages. (Some states do not allow limitations on implied warranties or exclusion of consequential damages,
so these restrictions may not apply to you.) This warranty gives you specific legal rights, and you may also have other rights
which vary from state to state.
For questions or comments regarding this or other products, please call our toll-free number 1-800-888-4491.
TIMEX is a registered trademark of Timex Corporation in the U.S. and other countries.
T438-010203-02
Printed in China
|