10.4" LCD HD Monitors in Metal Housing
LCD-1048HDM
LCD-1048HDM2
Side View
LCD-1048HDM
LCD-1048HDM2
Display:
Back Light:
Input Signal:
10.4" TFT LCD active matrix
2 x CCFT
• 3mm thick tempered glass helps to protect display panel
from damage in the field
• HD compatible (supports 480p/i, 720p, 1080p/i)
• RS-232 serial control provided
[Composite, component, & S-Video, NTSC/PAL auto sensing]
analog RGB
0.206 (H) x 0.206 (V)mm
1024(H) x 768(V) [700 lines for CCTV] or
786,432 dots
350 cd/m² (Nit)
262,144
500:1
90/90/90/90 degrees
• Composite video BNC IN/OUT provides security
for video connections
• Underscan capability
Dot Pitch:
Resolution:
Number of Pixels:
Brightness Rating:
Colors:
• On-screen display controls, with front controls for
Power, Select, Menu, and Volume Up/Down
• Wireless remote control with hot key allows
easy toggling between sources
Contrast Ratio:
Viewing Angle L/R/T/B:
Pixel Configuration:
Audio output:
• Rear IR jack allows direct connection for
use with IR repeater systems
RGB Vertical Stripe
5W x 2, 8 ohm
• Screw-down DC feature provides additional
Dimensions including BNC jack (WHD):
LCD-1048HDM2: Dimensions (WHD):
Actual visible screen size (WH):
Operating temperature:
247 x 215 x 58mm / 9.7" x 8.5" x 2.3"
19" x 8.75" x 2.3" (Occupies 5 RU)
210 x 158mm / 8.3" x 6.2"
50~104°F or 10 ~ 40°C
14 ~ 158°F or -10 ~ 70°C
12VDC, 2A, negative ground/24W
Composite: BNC IN/OUT jacks, 2 RCA IN jacks
Component: 3 RCA IN jacks
S-Video IN jack
Audio: 3.5 PC audio IN, RCA L/R audio inputs,
L/R screw down speaker connectors,
and 3.5 audio line OUT
PC: 15-pin mini D-sub
security for power connection
• Speaker output on board allows screw down
connection for R/L audio
• Built-in amplifier provides ample power to drive
right and left stereo 8 ohm speakers
Storage temperature:
Power requirement/consumption:
Rear Terminal Connections:
• Made of durable metal with black powder coating
• Built-in interface and proper cable exiting for
wall arm mounting, VESA 75mm compliant
• Response time: 15/25 ms (rising/falling)
• SPS included, 100~240 VAC
Dual Rack-mounted 10.4" Monitors
Model LCD-1048HDM2 (shown above)
RS-232: 9-pin
3.5 IR IN
Dimensions (WHD): 19" x 8.75" x 2.3" (Occupies 5 RU)
Power: 2.1mm DC jack, screw down DC connector
Net: 2.4 kg. / 5.3 lbs.
Gross: 3.7 kg. / 8.05 lbs
Net: 6.07 kg. /13.4 lbs.
LCD-1048HDM Weight:
LCD-1048HDM2 Weight:
Optional Accessories
DC-1500
HM-400
WM-31
Factory approved car cord
Under-cabinet hinge mount
Wall mount bracket (fixed)
Gross: 8.77 kg. /19.35 lbs
WM-302
Wall mount with swing arm & 4-way adjustable
GS-07F-0069L, SIN: 246-42(1), 246-50
1319 Dexter Ave. N. • Ste. 020 • Seattle, WA 98109
Tel: 206-623-6000 • FAX: 206- 623-6609
E-mail: [email protected]
Specifications subject to change without notice
©2009 ToteVision
30K
P.17
|