Project
Quantity
Item #
Model Specified:
CSI Section 11400
"D-Width" Reach-In Freezer Models/
One & Two Section Models, 26" Deep
Self-Contained
1-Section Full Length Door Model
2-Section Full Length Door Model
1-Section Half Length Door Model
2-Section Half Length Door Model
RLT132DUT-FHS
RLT232DUT-FHS
RLT132DUT-HHS
RLT232DUT-HHS
R
SERIES
Stainless Exterior
& Interior
INTELA-TRAUL®
Equipped!
1-Section Full Length Door Model
2-Section Full Length Door Model
1-Section Half Length Door Model
2-Section Half Length Door Model
ALT132DUT-FHS
ALT232DUT-FHS
ALT132DUT-HHS
ALT232DUT-HHS
A
SERIES
Stainless Exterior,
Anodized
Aluminum Interior
The R &ASeries represent Traulsen's Top-of-the-Line product offering. The
“D-Width” reach-in freezer models are all designed to offer maximum
interior storage capacity within a narrow 24" or 48" footprint. Each is
supplied standard with such high quality features as balanced
refrigeration systems, microprocessor controls, communications ability and
stainless steel exteriors. Additionally, they offer the widest range of optional
accessories to choose from, and can be specified for use with many
different applications, including: Foodservice, Correctional, Institutional,
Export, etc.
Model RLT132DUT-FHS
(shown with optional casters)
Standard Product Features
Options & Accessories
•
•
•
•
•
•
•
•
•
•
•
R-Series: Stainless Steel Exterior & Interior
A-Series: Stainless Steel Exterior/Anodized Aluminum Interior
INTELA-TRAUL® Microprocessor Control System
Balanced, Self-Contained Refrigeration System Using R-404A
Scroll Blower Type Evaporator Fan (two section models only)
Biased Return Air Duct (two section models only)
Full or Half Length Stainless Steel Doors With Locks
Self-Closing Doors With Stay Open Feature At 120 Degrees
Guaranteed For Life Cam-Lift Hinges
Guaranteed For Life Horizontal Work Flow Door Handle
Standard Door Hinging: 132D = Right, 232D = Left/Right (other
hingings not available for two-section models)
Automatically Activated Incandescent Lights
Stainless Steel Breaker Caps
•
•
•
•
Stainless Steel Finished Back With Rear Louvers
Re-Hinging Feature For Door(s)
Additional Chrome Plated Shelves
No. 1 Type Tray Slides To Accommodate either (1) 18" x 26"
or (2) 14" x 18" Sheet Pans, Adjustable To 2" O.C.
No. 2 Type Tray Slides To Accommodate (1) 18" x 26" Sheet
Pans, Adjustable To 2" O.C.
Locking Hasps (padlocks supplied by others)
Stainless Steel Shelves In Lieu of Standard Chrome Plated
Kool Klad Exterior Laminate Decor
Set of Four (4) 6" High Casters In Lieu of Legs
Set of Four (4) 4-5/8" High Casters In Lieu of Legs
4-1/2" High Stainless Steel Base In Lieu of Legs
6" High Stainless Steel Kickplate (for use with standard legs)
Prison/Correctional Facilities Options
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Three Chrome Plated Adjustable Shelves Per Section,
Supported On Shelf Pins (installed at the factory)
Automatic Non-Electric Condensate Evaporator (two section
models only)
Remote Applications (see spec sheet 12-2 for more details)
Two Year Service/Labor Warranty Available
•
•
•
•
•
•
•
•
•
•
•
Magnetic Snap-In Door Gaskets
Gasket Protecting Metal Door Liner
Controllable Anti-Condensate Door Perimeter Heaters
Thermostatic Expansion Valve Metering Device
Stainless Steel One-Piece Louver Assembly
9' Cord & Plug Attached
Set of Four (4) 6" High Adjustable Stainless Steel Legs
One Year Parts And Labor Warranty
Two Year Control Warranty (parts and labor)
Five Year Compressor Warranty
Listed by Underwriters Laboratories Inc., to
U.S. and Canadian safety standards and
Listed by NSF International.
Approval: ___________________________________
TRAULSEN
4401 BLUE MOUND RD.
PHONE 1 (800) 825-8220
FT. WORTH, TX 76106
FAX-MKTG. 1 (817) 624-4302
SECTION
1-11
|