AC2000 SIA Intruder Interface
Interface for Intruder Detection System Integration
FEATURES
OVERVIEW
• Seamless integration with
intruder detection systems
The SIA Intruder Interface with AC2000 SE enables alarms from intruder detection
systems to be displayed using a single alarm display screen.
• Activated alarms shown instantly
within AC2000 AED (Alarm and
Event Display) module
Intruder detection panels are added to AC2000 SE as separate devices with alarms
generated by the panels forwarded to AC2000 SE over an Ethernet network using
the SIA protocol. Each panel is added to the system in groups of 8 or 16 inputs
using a user friendly application which simplifies the configuration of larger
intruder panel systems by automatically creating and addressing entries in the
AC2000 devices table thereby greatly reducing the amount of data the operator
must enter.
• Alarm zone icons can be placed
on to graphical maps in AED
module alongside access control
readers
• Simple configuration tool to
create entire intruder detection
systems within AC2000
Alarms from the intruder panels are sent to AC2000 SE where the SIA codes
are extracted and mapped to AC2000 system alarms. These alarms are treated
like all other alarms on the access control system where they can be sent to
the AED (Alarm and Event Display) application for visual annunciation and
acknowledgement. Alarms can also activate other systems, such as CCTV matrix,
or be used to cause video images to be recorded on a compatible digital video
management system (DVMS).
• Displays up to 64 different alarms
groups that can contain numerous
SIA alarms
• Compatible with multiple Intruder
detection systems
|