SATA / IDE TO USB 2.0 Adapter
URES
Rates Up to 12Mbps With USB 1.1
Rates Up to 480Mbps With USB 2.0
d storage to any system with USB
y supports up to 500GB
s ATA/ATAPI-7
s LBA-48 Addressing
ppable: Plug and play without rebooting!
FICATION
SATA to USB 2.0
3.5” & 5.25” IDE to USB 2.0
2.5” IDE to USB 2.0
ns: 70 x 43 x 10 mm
Cable Length: 92cm (36in)
The SATA/IDE-USB Adapter gives you the flexibility
of connecting almost any type of drive to your
computer via USB. SATA, 3.5”IDE, 5.25”IDE, and 2.5”
IDE drives are all supported and can be easily
hot-swapped to your system. The included exter-
nal power adapter will allow you to power your
drives outside your system giving you the ability to
quickly add or swap between drives without
opening your case. The SATA/IDE-USB adapter
incorporate 3 interfaces to one USB adapters.
SYSTEM REQUIREMENTS
IntelPentiumII350MHz-compatibleorAppleG3processorandgreater
MicrosoftWindows98SE/ME/2000/XPorMacOS8.6andgreater
USB-equippedsystem
ForUSB2.0speeds,thesystemmustsupportUSB2.0specifications
CDRomdrive(ifdriversareneeded)
CB-ISATAU2
MODEL:
|