ViewSonic Digital Photo Frame VS12242 User Manual

 
DPG801BK  
Compliance Information  
FCC Statement  
This device complies with part 15 of FCC Rules. Operation is subject  
to the following two conditions: (1) this device may not cause harmful  
interference, and (2) this device must accept any interference received,  
including interference that may cause undesired operation.  
This equipment has been tested and found to comply with the limits  
for a Class B digital device, pursuant to part 15 of the FCC Rules.  
These limits are designed to provide reasonable protection against  
harmful interference in a residential installation. This equipment  
generates, uses, and can radiate radio frequency energy, and if not  
installed and used in accordance with the instructions, may cause  
harmful interference to radio communications. However, there is no  
guarantee that interference will not occur in a particular installation. If  
this equipment does cause harmful interference to radio or television  
reception, which can be determined by turning the equipment off and  
on, the user is encouraged to try to correct the interference by one or  
more of the following measures:  
Reorient or relocate the receiving antenna.  
Increase the separation between the equipment and receiver.  
Connect the equipment into an outlet on a circuit different from  
that to which the receiver is connected.  
Consult the dealer or an experienced radio/TV technician for help.  
Warning: You are cautioned that changes or modifications not  
expressly approved by the party responsible for compliance could  
void your authority to operate the equipment.  
For Canada  
This Class B digital apparatus complies with Canadian ICES-003.  
Cet appareil numérique de la classe B est conforme à la norme  
NMB-003 du Canada.  
Quick Start Guide  
 
i
DPG801BK  
CE Conformity for European Countries  
The device complies with the requirements of the EEC  
directive 2004/108/EC as amended by 92/31/EEC and  
93/68/EEC Art.5 with regard to “Electromagnetic  
compatibility”, and 2006/95/EC as amended by 93/68/  
EEC Art.13 with regard to “Safety”.  
Following information is only for EU-  
member states:  
The mark shown to the right is in compliance with the  
Waste Electrical and Electronic Equipment Directive 2002/  
96/EC (WEEE).  
The mark indicates the requirement NOT to dispose the  
equipment as unsorted municipal waste, but use the return  
and collection systems according to local law.  
Important Safety Instructions  
1. Read these instructions.  
2. Keep these instructions.  
3. Heed all warnings.  
4. Follow all instructions.  
5. Do not use this unit near water.  
6. Clean with a soft, dry cloth. If still not clean, see “Cleaning the  
Display” in this guide for further instructions.  
7. Do not block any ventilation openings. Install the unit in  
accordance with the manufacturer's instructions.  
8. Do not install near any heat sources such as radiators, heat  
registers, stoves, or other devices (including amplifiers) that  
produce heat.  
9. Do not defeat the safety purpose of the polarized or grounding-  
type plug. A polarized plug has two blades with one wider than the  
other. A grounding type plug has two blades and a third grounding  
ii  
Quick Start Guide  
 
DPG801BK  
prong. The wide blade and the third prong are provided for your  
safety. If the provided plug does not fit into your outlet, consult an  
electrician for replacement of the obsolete outlet.  
10. Protect the power cord from being walked on or pinched  
particularly at plugs. Convenience receptacles and the point where  
they exit from the unit. Be sure that the power outlet is located near  
the unit so that it is easily accessible.  
11. Only use attachments/accessories specified by the manufacturer.  
12.Use only with the cart, stand, tripod, bracket, or table  
specified by the manufacturer, or sold with the unit.  
When a cart is used, use caution when moving the  
cart/unit combination to avoid injury from tipping  
over.  
13. Unplug this unit when unused for long periods of time.  
14.Refer all servicing to qualified service personnel. Servicing is  
required when the unit has been damaged in any way, such as: if  
the power-supply cord or plug is damaged, if liquid is spilled onto  
or objects fall into the unit, if the unit is exposed to rain or  
moisture, or if the unit does not operate normally or has been  
dropped.  
Quick Start Guide  
 
iii  
DPG801BK  
Declaration of RoHS Compliance  
This product has been designed and manufactured in compliance with  
Directive 2002/95/EC of the European Parliament and the Council on  
restriction of the use of certain hazardous substances in electrical and  
electronic equipment (RoHS Directive) and is deemed to comply with  
the maximum concentration values issued by the European Technical  
Adaptation Committee (TAC) as shown below:  
Substance  
ProposedMaximum  
Concentration  
Actual  
Concentration  
Lead (Pb)  
0.1%  
0.1%  
0.01%  
0.1%  
< 0.1%  
< 0.1%  
< 0.01%  
< 0.1%  
Mercury (Hg)  
Cadmium (Cd)  
Hexavalent Chromium (Cr6+  
)
Polybrominated biphenyls (PBB)  
0.1%  
0.1%  
< 0.1%  
< 0.1%  
Polybrominated diphenyl ethers  
(PBDE)  
Certain components of products as stated above are exempted under  
the Annex of the RoHS Directives as noted below:  
Examples of exempted components are:  
1. Mercury in compact fluorescent lamps not exceeding 5 mg per  
lamp and in other lamps not specifically mentioned in the Annex  
of RoHS Directive.  
2. Lead in glass of cathode ray tubes, electronic components,  
fluorescent tubes, and electronic ceramic parts (e.g.  
piezoelectronic devices).  
3. Lead in high temperature type solders (i.e. lead-based alloys  
containing 85% by weight or more lead).  
4. Lead as an allotting element in steel containing up to 0.35% lead  
by weight, aluminium containing up to 0.4% lead by weight and as  
a cooper alloy containing up to 4% lead by weight.  
iv  
Quick Start Guide  
 
Table of Contents  
Follow the instructions below to install and operate the unit. . . . .1  
Step 1: Check the components.. . . . . . . . . . . . . . . . . . . . . . . .1  
System Requirements: . . . . . . . . . . . . . . . . . . . . . . . . . . . .1  
Controls on the front . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2  
Controls on the back . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2  
Step 2: Install the adjustable foot stand. . . . . . . . . . . . . . . . . .3  
Step 3: Connect the AC power. . . . . . . . . . . . . . . . . . . . . . . . .4  
Step 4: (Optional) Insert a memory card.. . . . . . . . . . . . . . . . .5  
Step 5: Turn on the unit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6  
Step 6: Operate the unit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6  
Using the Photo mode. . . . . . . . . . . . . . . . . . . . . . . . . . . . .8  
Using the Calendar mode . . . . . . . . . . . . . . . . . . . . . . . . . .8  
Using the Music mode. . . . . . . . . . . . . . . . . . . . . . . . . . . . .9  
Using the Video mode.......................................................10  
Quick Start Guide  
 
v
DPG801BK  
<Memo>  
vi  
Quick Start Guide  
 
DPG801BK  
Follow the instructions below to install  
and operate the unit.  
Step 1: Check the components.  
Carefully open the packing box and ensure that you have the  
following items.  
1. Digital photo frame (DPG801BK)  
2. Adjustable foot stand  
3. USB cable  
4. Quick Start Guide  
5. AC power adapter  
System Requirements:  
USB 2.0 interface  
Windows 2000/XP/Vista  
Quick Start Guide  
 
1
DPG801BK  
Controls on the front  
Control panel  
Controls on the back  
Hanging slot  
Speaker  
Lock slot  
Power switch  
Power jack  
USB jack (for connecting to a  
computer so the computer can  
edit files in the unit)  
5-in-1 card slot:  
SD/xD/MMC/MS/MS Pro  
2
Quick Start Guide  
 
DPG801BK  
Step 2: Install the adjustable foot stand.  
1. On the back of the unit, attach the foot stand to the lock slot.  
Lock slot  
Adjustable foot stand  
2. To place the photo frame vertically, rotate the foot stand counter-  
clockwise until it is secured to the photo frame.  
Quick Start Guide  
 
3
DPG801BK  
3. To place the photo frame horizontally, rotate the foot stand  
clockwise until it is secured to the photo frame.  
Step 3: Connect the AC power.  
1. Plug one end of the AC power adapter into the power jack on the  
back of this unit.  
2. Plug the other end into a power outlet.  
4
Quick Start Guide  
 
DPG801BK  
3. Place this unit horizontally (recommended direction) or vertically  
on a stable surface.  
Step 4: (Optional) Insert a memory card.  
On the back of the unit, you can insert a memory card containing the  
content you want to show on the unit.  
Note: Secure Digital™ Card (SD), xD-Picture Card™ (xD),  
MultiMedia Card™ (MMC), Memory Stick™ (MS), and Memory  
Stick Pro™ (MS Pro) memory card types are compatible with the  
unit. To use a Memory Stick Duo (MS Duo) memory card, a  
Memory Stick Duo (MS Duo) adapter is required.  
Quick Start Guide  
 
5
DPG801BK  
Step 5: Turn on the unit.  
Slide the power switch to the ON position to power on the unit.  
Power switch  
Step 6: Operate the unit.  
After the unit is turned on, available functions (represented by name  
or icon) show on the screen. Their corresponding buttons also light up  
on the control panel for a period of time.  
6
Quick Start Guide  
 
DPG801BK  
Simply press the corresponding button below (if the unit is placed  
horizontally) or beside (if the unit is placed vertically) the name or  
icon indicating the function you want to use.  
Control panel  
To toggle among Photo, Calendar, Music, and Video modes, press  
under Mode.  
If the control panel is unused for a certain period of time, the LED  
turns off automatically. To turn on the backlight again, press  
anywhere on the control panel.  
Quick Start Guide  
 
7
DPG801BK  
Using the Photo mode  
Current file  
number/Total  
number of files  
Current  
mode  
LCD screen  
Mode  
selection  
Thumbnail  
view  
Menu  
Zoom-out  
Zoom-in Previousfile  
Slideshow  
Next file  
Note: Standard JPEG and BMP image file formats are supported.  
Using the Calendar mode  
Current mode  
Mode selection  
Menu  
Next month  
Previous month  
8
Quick Start Guide  
 
DPG801BK  
Using the Music mode  
Current  
mode  
Track name,  
elapsed  
time, and  
volume level  
List of all  
musictracks  
and access  
to menu  
Mode  
selection  
Play or Pause  
Next track  
Volume down  
Volume up Previous track  
Note: MP3 and WMA audio file formats are supported.  
Quick Start Guide  
 
9
DPG801BK  
Using the Video mode  
Current  
mode  
Video file  
name,  
elapsed time,  
and volume  
level  
List of all  
video files  
andaccess  
to menu  
Mode  
selection  
Play or Pause  
Next video file  
Volume up Previous video file  
Volume down  
Note: The Motion JPEG (M-JPEG) compressed video files (*.avi  
and *.mov) are supported. However, not all files with these  
extensions can be played properly. Refer to the table below for  
limitations.  
AVI  
MOV MPEG MPG WMV  
O
O
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
Motion-JPEG-<DSC>  
MPEG1-<VCD>  
X
X
X
MPEG2-<DVD>  
MPEG4-<DV> (High  
Compress)  
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
H.264-<DV>  
H.263-<MOBILE>  
WMV-<PC>  
10  
Quick Start Guide  
 

Taylor Scale 7340EXP User Manual
Technicolor Thomson CRT Television 14MS15GT User Manual
Technicolor Thomson Flat Panel Television 32LB030B5 User Manual
TechniSat Switch 11 20K User Manual
Texas Instruments Network Card TMS320DM36X User Manual
Thiel Audio Products Speaker PowerPlane User Manual
Tripp Lite Computer Accessories NB1150BKTAB User Manual
Tripp Lite Indoor Furnishings SRCABLELADDER User Manual
Uniden Portable Radio GMRS520 User Manual
Venturer Digital Photo Frame DPF561SE User Manual