USER’S GUIDE
Manual No. 1005294
Release 05.2000, Rev. B
©
Copyright 2000 Viking Components, Inc.
VIKING COMPONENTS INTELLIFLASH USB FLASH MEMORY READER USER’S GUIDE
1 Introduction
Congratulations on purchasing your Viking Components IntelliFlash™
USB Combo Reader for your computer. IntelliFlash utilizes USB tech-
nology, the latest advancement in the PC industry, bringing you con-
venient, high-speed access to a variety of storage cards.
IntelliFlash Features & Specifications
Features:
• Compact external design for portability
• Includes connections for PC Card types including
SmartMedia™ (SSFDC), PC Card (Types I, II) ATA
cards and CompactFlash™
• Hot swappable for card insertion and removal
• Up to 5 times faster than digital cameras with a
USB connection
• Active LED indicating SmartMedia (SSFDC),
CompactFlash or ATA card usage
• Image transfer rate up to 1.5 MB per second with
USB technology - 50 times faster than standard
camera connection.
Chapter 1
1
VIKING COMPONENTS INTELLIFLASH USB FLASH MEMORY READER USER’S GUIDE
Specifications:
• Supports Windows 2000, 98, 95 (OSR2) &
Mac OS 8.6 or later (with USB support)
Host computer requirements:
• 586/686 level CPU
• USB port
• Windows 2000, 98, 95 (OSR2) & Mac OS 8.6 or later
(w/USB support)
• Power Supply: +5V from USB port directly
• Data Transfer Rate: 1.5 MB/sec (max)
Environment:
• Operating temperature: 0˚C - 70˚C
• Storage temperature: - 40˚C - 70˚C
• Relative humidity: 95% (max. without condensing)
Chapter 1
2
VIKING COMPONENTS INTELLIFLASH USB FLASH MEMORY READER USER’S GUIDE
2 Package Contents
In the Viking Components IntelliFlash box, you should find the follow-
ing contents:
Software Installation
CD
Viking IntelliFlash
(with USB Cable)
This User’s Guide
Viking CompactFlash
Adapter
Contact your local dealer if this package does not contain the above
contents.
Chapter 2
3
VIKING COMPONENTS INTELLIFLASH USB FLASH MEMORY READER USER’S GUIDE
3 Software Installation
Note: Before connecting the Viking Components IntelliFlash USB Flash
Memory Reader to your computer, its software must be installed.
Proceed to your computer’s operating system and follow the software
installation instructions.
Windows 2000, 98 & 95 (OSR2):
1. Insert the supplied “Viking Components IntelliFlash Software
Installation” CD into your computer’s CD drive.
2. Locate the “My Computer” icon on your system’s desktop and dou-
ble-click on it to open. Then locate your computer’s CD drive and dou-
ble-click on it to open. Locate the “Setup” icon on this CD and double-
click on it to launch the application.
3. A “Setup” window will appear stating “IntelliFlash Setup is preparing
the InstallShield
®
Wizard which will guide you through the rest of the
setup process. Please wait.”
Chapter 3
4
VIKING COMPONENTS INTELLIFLASH USB FLASH MEMORY READER USER’S GUIDE
Windows 2000, 98 & 95 (OSR2): (Continued)
4. The “Welcome” window will appear. If you have any other applica-
tions open, close them at this time. Click on the “Next” button to con-
tinue with the installation procedure.
Chapter 3
5
VIKING COMPONENTS INTELLIFLASH USB FLASH MEMORY READER USER’S GUIDE
Windows 2000, 98 & 95 (OSR2): (Continued)
5.The“Setup Complete”window will appear. Select“Yes, I want to restart
my computer now.” Then click on the“Finish”button to restart your sys-
tem.
6.Your software installation is almost complete. The rest will load auto-
matically when the hardware is installed. Please proceed to the
“Hardware Installation” section on page 10.
Chapter 3
6
VIKING COMPONENTS INTELLIFLASH USB FLASH MEMORY READER USER’S GUIDE
Mac OS 8.6 or Later:
1. Insert the supplied “Viking Components IntelliFlash Software
Installation” CD into your computer’s CD drive. Locate the CD icon on
your computer’s desktop and double-click on it to open. Locate the
“IntelliFlash Installer” icon on this CD and double-click on it to launch
the application.
2. To begin the software installation, click on the “Continue” button.
Chapter 3
7
VIKING COMPONENTS INTELLIFLASH USB FLASH MEMORY READER USER’S GUIDE
Mac OS 8.6 or Later: (Continued)
3. The “IntelliFlash Installer” window will open. Your hard drive should
be selected in the“Install Location” pop-up menu. Click on the“Install”
button to begin the driver installation.
4. If you have any other application open, a close all other application
warning will appear. Click on the “Continue” button.
Chapter 3
8
VIKING COMPONENTS INTELLIFLASH USB FLASH MEMORY READER USER’S GUIDE
Mac OS 8.6 or Later: (Continued)
5. After the drivers have been installed, your system will need to be
restarted. Click on the “Restart” button to restart your computer.
6. Your software installation is now complete. Please proceed to the
“Hardware Installation” section on page 10.
Chapter 3
9
VIKING COMPONENTS INTELLIFLASH USB FLASH MEMORY READER USER’S GUIDE
4 Hardware Installation
1. Locate an available USB port on your computer and connect it with
the USB cable on the back of the Viking IntelliFlash USB Flash Memory
Reader. This port is usually located on the back of your system. If you
are not familiar with the location of the USB ports on your computer,
please refer to your systems “Owner’s Guide” for detailed instructions.
Note: The Viking Components IntelliFlash USB Flash Memory Reader
must be connected to a USB port on your computer or to a powered
USB hub.
Your hardware setup is now complete. For information on how to use
the Viking IntelliFlash, proceed to the section “Using the Viking
IntelliFlash” on page 11.
Chapter 4
10
VIKING COMPONENTS INTELLIFLASH USB FLASH MEMORY READER USER’S GUIDE
5 Using the Viking IntelliFlash
The Viking Components IntelliFlash USB Flash Memory Reader sup-
ports a variety of storage cards. An ATA flash card can be used in the
top socket. CompactFlash (when inserted into a CompactFlash
adapter) can also be used in the top socket. A SmartMedia card
(SSFDC) can be used in the bottom socket.
Chapter 5
11
VIKING COMPONENTS INTELLIFLASH USB FLASH MEMORY READER USER’S GUIDE
Operation Indication:
The Viking Components IntelliFlash USB Flash Memory Reader has two
active LED indicators for displaying operation status. The power LED
(green) is illuminated when power is being supplied to the reader. The
activity LED (red) will flash when the reader is busy.
Caution: Do not extract or insert a storage card into the reader while
the red LED is flashing.
ATA Flash/ CompactFlash Card Installation & Removal:
Insert an ATA flash or CompactFlash (with adapter) card face up firmly
into top socket of the reader. To remove a card, simply press on the
card eject button on the reader and pull the card out of the reader.
Chapter 5
12
VIKING COMPONENTS INTELLIFLASH USB FLASH MEMORY READER USER’S GUIDE
SmartMedia Card Installation & Removal:
Insert a SmartMedia card (SSFDC) with its gold leads side face down
into the bottom socket of the reader. To remove a card, simply pull the
card out of the reader.
Chapter 5
13
VIKING COMPONENTS INTELLIFLASH USB FLASH MEMORY READER USER’S GUIDE
Reading & Writing to Your Storage Card:
In most systems, a storage card is seen like a hard drive.
Windows
For Windows 2000, 98 and 95 (OSR2) based systems, go to the “My
Computer” icon on your systems desktop and double-click on it. You
should see the card listed. Simply double-click on the card to open it.
Information can then be placed or retrieved from it like any other stor-
age device.
Mac
For Apple with Mac OS 8.6 or later, the card will appear on the desktop.
Simply double-click on the card to open it. Information can then be
placed or retrieved from it like any other storage device.
Chapter 5
14
VIKING COMPONENTS INTELLIFLASH USB FLASH MEMORY READER USER’S GUIDE
6 Support
Frequently Asked Questions:
•
Why am I not getting drive letters or icons?
Windows: Go to “Start/Settings/Control Panel/System/Device
Manager.” Locate the “Universal Serial Bus Controller.” Look for the
item“IntelliFlash Device Driver.” Then go to“IntelliFlash”in the“Device
Manager” and look for “CF/ATA Reader” and “SM Reader.” If they are
there try unplugging the device and then plug it back in. This should
give you the missing drive letters.
•
•
Do I need the card reader plugged in while loading the software?
No. Do not plug the device in while loading the software.
Why do I have two drive letters under My Computer?
Windows: The lower drive letter is the SmartMedia socket, the higher
letter is the ATA/CompactFlash socket.
•
•
My device is not reading my SmartMedia card.
When inserting the card, make sure the gold portion is facing down
in the device.
My device is not reading my CompactFlash card.
Try resetting the CompactFlash in the adapter and make sure that
the card is flush with the adapter.
Chapter 6
15
VIKING COMPONENTS INTELLIFLASH USB FLASH MEMORY READER USER’S GUIDE
•
How do I format my card in the card reader?
Windows: Open “My Computer” and locate the drive letter associated
to the card you want to format. Right click on the drive letter and
then left click on “Format.” Choose the “Full” option and click “Start.”
How do I uninstall the software?
Windows: Choose “Start/Programs/Viking/Uninstall IntelliFlash.” Then
follow the on-screen instructions.
•
•
Will the IntelliFlash work on my iMac?
Yes it will. Your iMac must have Mac OS 8.5 or later. For older iMacs
you will need to get Apple Firmware Update 1.0 and Apple iMac
update 1.1 from Apple Computer's Web site.
Chapter 6
16
VIKING COMPONENTS INTELLIFLASH USB FLASH MEMORY READER USER’S GUIDE
Contacting Technical Support:
If your questions have not been answered or if you are unable to solve
a problem with your IntelliFlash USB Flash Memory Reader by using
this guide, Viking Components has technical support available.
Before calling technical support, please prepare to have the following
information available:
•
•
•
Machine type
Operating system
Detailed descriptions of question or problem
United States Headquarters (24 hours a day / 7 days a week):
(Supporting North America, South America, Canada and the Pacific Rim)
Phone Number: 888.801.9181
Email: [email protected]
Corporate Web Site: www.vikingcomponents.com
European Headquarters (8:30 AM-5:00 PM GMT, Monday-Friday):
(Supporting Europe, Middle East, Africa and the Pacific Rim)
Phone Number: ++353.1.466.0090
Email: [email protected]
European Web Site: www.viking.ie
Chapter 6
17
VIKING COMPONENTS INTELLIFLASH USB FLASH MEMORY READER USER’S GUIDE
7 Warranty & Disclaimer Information
One Year Warranty
All products have been thoroughly tested to be free of defects in material and workmanship. If any product should
malfunction while used in its recommended environment during the applicable warranty period,Viking, at its option,
will repair or replace the product at no charge, provided the product or any part thereof has not been abused, mis-
used, neglected, replaced, repaired, or modified. Viking shall make the final determination as to the existence and
cause of any defect. Viking will not repair or replace any product that has a "limited lifetime" which fails solely because
its estimated life has expired. No warranty is made with respect to custom products produced to original Buyer spec-
ifications, except as specifically stated in writing by Viking. Buyer acknowledges and agrees that neither Viking nor
any agent or representative of Viking has made any warranty, promise or guarantee regarding the product or its suit-
ability for any particular use except as expressly set forth herein. Viking's warranty shall not be enlarged, diminished,
or affected by, and no obligation or liability shall arise or grow out of,Viking's rendering of technical advice or service
in connection with any product furnished thereunder. Viking makes no representation or warranty whatsoever to
Buyer with respect to the performance, appropriate use, safety or characteristics of the products, except as expressly
provided herein. Viking reserves the right to make modifications to both hardware and software without prior noti-
fication. THE FOREGOING EXPRESS WRITTEN WARRANTIES AND REMEDIES ARE EXCLUSIVE AND ARE IN LIEU OF ANY
OTHER WARRANTIES OR REMEDIES, EXPRESS, IMPLIED OR STATUTORY, INCLUDING THE IMPLIED WARRANTIES OF MER-
CHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
Limitation of Liability
VIKING SHALL IN NO EVENT BE LIABLE TO BUYER OR ANY THIRD PARTY FOR ANY CONSEQUENTIAL, INDIRECT OR INCI-
DENTAL DAMAGES, INCLUDING BUT NOT LIMITED TO LOSS OF PROFITS, LOSS OF BUSINESS INVESTMENT, LOSS OF
GOODWILL, AND/OR INTERFERENCE WITH BUSINESS RELATIONSHIPS, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
DAMAGES. VIKING SHALL NOT BE LIABLE IN THE EVENT THAT THE PRODUCTS OR ANY DEFECT THEREIN CAUSE ANY
DAMAGE TO OR FAILURE OF OTHER EQUIPMENT. THE FOREGOING LIMITATION OF LIABILITY SHALL NOT APPLY TO THE
EXTENT THAT IT IS ILLEGAL OR UNENFORCEABLE UNDER APPLICABLE LAW.
IntelliFlash is a registered trademark of Viking Components, Inc..
Apple and Mac are registered trademarks of Apple Computer, Inc.
Windows is a registered trademark of Microsoft Corporation.
All other trademarks mentioned are property of their holders.
©
Copyright 2000 Viking Components, Inc.
Chapter 7
18
|